Only show results available in Virginia? Ok

Hazardous Areas Applications

  • Premium

    Laboratory Weighing - Hazardous Area (Ex) Weighing

    Are you continuously seeking to improve your safety, health and environmental standards, while striving for increased productivity and product quality? With METTLER TOLEDO’s solutions for hazardous areas, apparent contrasts turn into one set of standards. Our wide selection of intrinsically safe weighing systems includes balances, indicators and accessories, weighing modules, and weighing platforms of several sizes, shapes and capacities.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Industrial Weighing - Hazardous Area (Ex) Weighing

    Explosive areas need special consideration, but performance should not be compromised. That’s why METTLER TOLEDO has built the most extensive range of hazardous area (Ex) products available from a range of compact, bench, floor, custom, load cells and vehicle scales up to 2000 tons. Many of our products comply with the new European ATEX directive for Group 2 and 3 devices, Factory Mutual, Canadian Standards as well as many country specific regulations.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Monitoring solutions for the flow monitoring areas

    Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be used in extremely dust environments such as SCR’s when dust loadings exceed 10g/m3. The VCEM 5100 is in full compliance with EN/ISO 16911 part 2.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Fire detection solutions for the oil rigs

    The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output in opacity which is transmitted to the rig safety systems.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Water treatment solutions for oil and gas industry

    "Made in Germany" for the global oil and gas industry. ProMinent`s tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Flow Measurement instrumentation for digital flow meter air measurement solutions

    From heavy industrial to research and analytical applications, Sierra has a wide range of digital air flow meters and controllers with digital output protocols. Sierra offers digital gas flow meters and mass flow meters across two core technologies: Capillary Thermal, and Immersible Thermal.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Ultraviolet Disinfection system for the ATEX hazardous area UV systems

    ATEX Certified UV Systems for Hazardous Zones 1 & 2. As a key water treatment technology, UV systems are increasingly required to be design for use in hazardous areas with explosive atmospheres.  Whilst there are many UV systems available on the market, there are very few that can meet the strict requirements of the ATEX & IECEX directives for installation into explosive atmospheres and classified hazardous zones. atg UV Technology is the worlds` leading supplier of ATEX and IECEX certified UV Systems and skid packages for operation in hazardous area Zones 1 and 2.  In addition atg UV Technology are the only UV manufacturer in the World to specilise in ATEX and IECEX certified equipment for the oil, gas and petrochemical sectors.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Air Pollution Control for Microelectronics

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements. During the microelectronics boom years in the 1990s, ERG installed a variety of plants treating acid off-gases (HF, F2, HCl, Cl2, etc) with the capability to handle the sticky silanes formed from chlorosilane hydrolysis.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Premium

    Storage and Loading Areas

    The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and consultation phase.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Air Pollution Control for Metal Finishing

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Food Storage Temperature Monitoring

    In the Restaurant and Food Services Industry, it is imperative that all food and other perishable items are stored in properly regulated environments at proper food storage temperatures. These can include walk-in freezers, coolers or any other area within the restaurant or storage warehouse. To help meet the highest possible standard for food safety and to meet future government food and health mandates, Enviromon has been developing solutions to help meet the strict food safety standards set in place to protect your perishable products and more importantly, your patrons.

    By Enviromon Environmental Monitoring Systems based in Windsor, ONTARIO (CANADA).

  • Perimeter Monitoring and Area Monitoring

    GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed from a facility is detected and logged.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Gas detection analyzers for storage

    Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Safety incident tracking

    So you have a job that requires you to be involved in hazardous areas? Does your company promote high standards of safety culture? Are you regulated by the EPA, OSHA, and other federal, state, and local agencies? Documenting non-conformances and incidents in disparate static spreadsheets and home-grown solutions is not enough to meet most requirements. You need a centralized safety solution that also allows for detailed evaluations of root cause, corrective action tracking and trending performance so you can mitigate future risk and address systemic issues in the workplace. Perillon Workspace provides a comprehensive and powerful tool to quickly and efficiently identify trends, issues, and problems related to safety.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Refineries & Refinery Emissions Monitoring & Analysis

    Procal supplies the oil refining industry with both process and emission monitoring analysers to meet a wide range of applications.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • PEHD membrane sealing systems for storage areas

    Areas used to store substances which could represent a hazard if they escape into groundwater must also be leakproof in case accidents occur.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • XRF analysis for environmental applications

    Niton analysers are versatile environmental testing instruments that provide valuable assistance in portable soil testing applications such as brownfield site investigation. With the ability to analyse a wide range of materials, our instruments provide lab-quality soil/sediment chemistry in seconds. Lead, arsenic, cadmium, chromium, and other toxic metals contaminate sites of former industrial and agricultural activity around the world. Whatever the reasons for these occurrences, these pollutants cannot be ignored – particularly as environmental consciousness and regulatory initiatives grow.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Manufactured Gas Plant Site Remediation

    It is estimated that there are over 3,000 former Manufactured Gas Plant (MGP) sites across the United States. Another 4,000 dot the landscape of Canada, the UK, continental Europe and Japan. These sites were built long ago on rivers or harbors, often on the outskirts of towns and cities; locations that are now frequently in close proximity to infrastructure, buildings and residential areas. Many underlie or abut valuable commercial, residential, and municipal properties, posing environmental hazards to ground and surface waters. The urgency of remediation has increased due to a potent blend of community activism, regulatory pressure, high real estate values, and the need to reduce liability in light of the Sarbanes-Oxley Act and other measures.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Chemical Industry Emissions Analysis

    The inherent flexibility of Procal analysers enables the instruments to be configured to meet Customer’s specific requirements. Their capability to monitor gas concentrations at elevated pressures and temperatures make Procal products ideal for process applications in the Chemical Industry.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Industrial solutions for air quality monitoring

    To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our customers.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you