Hazardous Materials Transport Articles

  • Dynamic desorption of arsenic from polymer-supported hydrated iron(III) oxide in a wastewater treatment plant

    Polymer-supported hydrated iron(III) oxide (PHIO) was successfully applied as adsorbent for arsenic removal in a wastewater treatment plant in Nandan, China. The practical PHIO adsorbent samples (PHIO-P) were collected from the adsorption column of the wastewater treatment plant, and desorption experiments of the adsorbent were carried out. Our results showed that the formation of precipitates ...


    By IWA Publishing

  • Revolutionary advances in safer tube and pipe machinery can be a direct result of the evolutionary nature of product development.

    It’s remarkable how fast changes occur in devices we utilize in our everyday lives. Living in an era of seemingly boundless innovation, new products are introduced and then continuously refined by driving forces such as competition, regulation, improved technology, liability, labor, material costs, and consumer demand. Amazingly, many life-defining inventions can progress from a creative ...


    By Tri Tool Inc.

  • Final Rule Pre-Publication: Hazardous Materials: Harmonization with International Standards (RRR) (HM-215N)

    DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts 107, 171, 172, 173, 175, 176, 178, and 180 [Docket No. PHMSA-2015-0273 (HM-215N)] RIN 2137-AF18 Hazardous Materials: Harmonization with International Standards (RRR) AGENCY: Pipeline and Hazardous ...

  • Are Universal Wastes DOT Regulated?

    The answer is yes, no, and maybe. Under the DOT regulations, hazardous wastes are regulated in all modes (ground, air, rail, vessel) of transportation. EPA has classified specific hazardous waste as Universal Waste to streamline the process and encourage recycling of these materials (see 40 CFR 273). EPA has specifically addressed the DOT requirements for these waste at ...

  • My Business is working with hazardous materials: What Do I need to know about WHMIS?

    Almost all Canadian jurisdictions have  updated from WHMIS 1988 to WHMIS 2015 and incorporated elements of the Globally Harmonized System, or GHS. WHMIS requirements place the responsibility on employers to ensure the health and safety of workers who may be exposed to WHMIS controlled products.  Employers must ensure that workers are educated about the hazards of controlled products ...


    By SafetySmart

  • Working safely around hazardous materials and contaminants

    The first step in working safely around hazardous materials should always be a hazard assessment review. The OSHA standard mandates companies must conduct a hazard assessment to identify the appropriate personal protective equipment (PPE) and properly train employees on how to use it. OSHA compliance officers will review written hazard assessments for completeness and accuracy. In the case of ...

  • Hazardous Material and Asbestos Inspection Case Study

    Global has been contracted by the Genesee County Land Bank Authority (GCLBA) to complete pre-demolition hazardous material and asbestos inspections on blighted structures located in the City of Flint beginning in 2002 and continuing through the present. In March and November 2013, Global was awarded multiple contracts from GCLBA, which utilize MBEG and HHF funding sources to eliminate blight and ...

  • How to avoid another Tianjin disaster?

    The massive explosions at a chemical warehouse in Tianjin, China, on 12 August, which have reportedly killed 139 people, with 34 persons still missing, over 700 injured, 6,000 displaced and the homes of another 17,000 damaged, are a deeply tragic reminder of the permanent need to reinforce safety at industrial sites containing hazardous materials.   This accident involved chemicals that can ...

  • Pump Contract for MARS Tanker. Logistic Support Ship - Case Study

    In 2010 following many months of dialogue with BMT Naval Architects the initial purchase enquiry for the supply of pumps and systems for the 4 new logistic support ships for the U.K RFA (Royal Fleet Auxiliary) was received from the Korean Shipyard DSME. DESMI participated in the tender process from the very beginning and had an open and honest dialogue with both the ...


    By DESMI A/S

  • Application of the EU Emissions Trading Directive

    Synthesising Member State reporting on the ETS The European Union (EU) emissions trading system (ETS) is one of the key climate policy instruments implemented in the EU to achieve its emission reductions objectives in a cost‑effective manner. The EU Emissions Trading Directive (EU, 2003, referred to hereafter as the 'EU ETS Directive'), and in particular Article 21 ...

  • The use of probabilistic plume predictions for the consequence assessment of atmospheric releases of hazardous materials

    Toxic load-based toxicity models have been increasingly applied to model the effects of atmospheric releases of hazardous materials. Although the majority of atmospheric transport and dispersion models predict only a ‘mean’ plume, real-world personnel are exposed to one of many possible individual realisations of a plume, and never to a ‘mean’ plume. Hazard prediction assessment capability ...


    By Inderscience Publishers

  • Compliance Corner - Develop and implement

    On March 25, 2003, the US Department of Transportation (DOT) issued an emergency revision to the Hazardous Materials Regulations (HMR) relating to security training and security planning for transporters and offerors (shippers) of hazardous materials (hazmat). DOT recognised a need to address growing concerns over the significant threat that hazmat can pose when it is used for malicious or ...


    By Verisk 3E

  • Potential environmental hazards of non–rechargeable electric torch wastes in Nigeria

    This study assessed the material and chemical compositions and methods of disposal of end–of–life non–rechargeable electric torches (EOLNETs). Thirty EOLNETs of ten different models were collected in Lagos, Nigeria. Total heavy metals in plastic and PWB components of the samples were determined using CPSC–CH–1002–08 and EPA 3050B methods. Questionnaires were distributed to 200 unselected ...


    By Inderscience Publishers

  • Strategies for Selecting an SDS Authoring Solution - New Regulations and Requirements Add Complexity

    Effective, compliant, and up-to-date hazard communication documents, especially Safety Data Sheets (SDSs), are a global requirement and a critical centerpiece for effective product stewardship practices throughout the product life cycle. Unfortunately, tracking international chemical regulatory guidelines and providing accurate and compliant hazard communication has never been more complex. The ...


    By Verisk 3E

  • SeNsiM-SEC: secure sensor networks integration to monitor rail freight transport

    In recent years, the interest in monitoring infrastructures has spread in many application domains, even because of the number of natural disasters and terrorist attacks. This important activity can be seen in the general context of critical infrastructure protection, such as the freight trains meant for hazardous materials transportation. The design of these systems must answer to several ...


    By Inderscience Publishers

  • The great enabler for a new age of retail excellence

    Product safety data sheets don’t get a lot of love in the retail industry, but major changes are underway that will make this formerly mundane document the cornerstone of numerous best practices. In recent weeks, the Retail Industry Leaders Association (RILA) introduced a new safety data sheet (SDS) template as part of a new environmental data and document information exchange initiative, ...


    By Verisk 3E

  • Comparative analysis of the transportation of select petrochemicals

    Large volumes of hazardous cargo move across US roadways daily. Field counts are conducted on sections of roadway that provide aggregated volumes. A high level of interest exists in acquiring the capability to replicate these periodic field counts through a computer–simulated programme. Base data and computer simulation models were identified, which could be coordinated with field counts. The ...


    By Inderscience Publishers

  • 'Zero' loss of life during natural hazards

    It is emphasised that minimisation of earthquake risk is certainly a necessity in order to reduce poverty and homelessness in urban areas. A two phase investigation scheme is outlined to determine which buildings are susceptible to collapse. In the first phase, teams inspect any and all buildings, public or private, whether be a school, hospital or residential and collect 'photographic' data by ...


    By Inderscience Publishers

  • Quantification of the number of injured people due to hazardous material accidents

    Accidents with hazardous materials may threaten the lives of people living in the direct environment of the transportation infrastructure. In many countries, fire brigades play a major role in advising the authorities when they are dealing with issues where hazardous materials are involved. Since emergency responders have to deal with injured persons, information concerning the number of injured ...


    By Inderscience Publishers

  • Bridge Height Limits Transport of Cl02 Storage Tanks

    Located in Northern Ontario on the Trans Canada Highway is a bridge that enables pedestrians and vehicles to cross the Spanish River. The bridge itself holds no place in the annals of Canadian history. It is in fact, quite unremarkable as a typical bridge found in the area. However, the Spanish River Bridge represented a major problem for an engineering project rquired by a local Bleach Pulp ...


    By Fabricated Plastics Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you