Only show results available in Texas? Ok

Hazardous Waste Sites Applications

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    REMOTOX for laboratory waste applications

    REMOTOX® for the removal of a wide range of heavy metals and other potentially harmful compounds commonly found in laboratory waste streams. Reducing hazardous waste on site to the minimum quantity can save transportation and disposal cost. Please contact us today for additonal info, pricing or a free sample for your evaluation.

    By Graus Chemicals, LLC based in Carefree, ARIZONA (USA).

  • Premium

    Continuous Metals Stack Monitor (CEMs)

    Cooper Environmental`s Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.

    By Cooper Environmental Services based in Tigard, OREGON (USA).

  • Waste Management Solutions for Metal Manufacturing Industry

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Waste Management Solutions for Metal Refining

    Metal refining is increasingly seen as an essential part of natural resource conservation As sources of primary metals become scarcer or harder to excavate, the only viable solution is to extract and recycle secondary source of material already in circulation in a number of mass produced consumer products across the globe. The challenge is finding a technology that can efficiently recover these valuable metals from their less valuable materials. Tetronics can assist with a range of metal refining challenges,...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Gas phase reduction technology solutions for municipal solid waste conversion sector

    The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that converts all organic waste that finds its way into the landfill site. The GPR processing plant would ideally be built at an existing landfill site. This takes full advantage of the current infrastructure for the collection of local and regional waste.

    By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

  • Waste Management Issues

    • Consulting, development and registration of the Declaration on Formation of Waste (according to the Decree of the Cabinet of Ministers of Ukraine No. 1218 of 03.08.1998 (most recent version dated 30.10.2013); • Development of the Registry Map of the Object of Formation of Waste (RM OFW) and/or the Registry Map of the Object of Handling and Disposal of Waste (RM OHDW) (according to the Decree of the Cabinet of Ministers of Ukraine No. 1360 of 31.08.1998 (most recent version dated 30.10.2013); • Inventory of...

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Wastewater pretreatment solutions for hazardous waste site remediation

    Groundwater Remediation, Superfund Sites, Suspended and/or Settleable Solids Removal, Metals Removal and Process Water.

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).

  • Reliable Shredding Technology for Hospital Waste

    Our hazardous waste shredders are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and...

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you