Industrial Noise Articles

  • Industrial Noise Control Services

    Industrial Noise Control Studies Study different equipment noise and recommend suitable noise insulation. This include diesel generators, gas turbines, compressors, pumps, fans, chillers, factory machineries, traffic noise,...etc. Our evaluations and recommended solutions meet general guidelines and practices of international standards and nroise laboratories such as ...

  • A holiday from noise pollution

    Tourism is one of the fastest growing economic sectors in the world and offers significant benefits, but among the many challenges the industry faces is protecting the local population, environment, and the travellers themselves, from excessive noise.  The modes of transport (especially planes and cars) and mass arrivals at airports, railway stations, and ports and harbours, mark just the ...


    By SoundPLAN International LLC

  • When Sound Becomes Noise

    Music to the ears of some can equally be perceived as unwanted, irritating noise to others – as illustrated by a recent news article about a Sydney pub forced to cancel live music on Sunday afternoons after five trouble-free years ...


    By Innova Global Limited.

  • Seeking Clarity in Noise

    Environmental noise regulation can be frustrating. The noise limits, applicable measurement metrics, assessment methods and level of enforcement vary a lot by region and jurisdiction and rarely do they all align. Historically, noise emitters and sensitive receivers could afford to use distance to separate themselves. Consequently, environmental noise laws were first developed in regions with high ...


    By Innova Global Limited.

  • Links between noise and air pollution and socioeconomic status

    Air pollution and noise pollution have a negative impact on all of society — but some groups are more affected than others. Lower socioeconomic status is generally associated with poorer health, and both air and noise pollution contribute to a wide range of other factors influencing human health. But do these health inequalities arise because of increased exposure to pollution, increased ...

  • Optimus and doseBadge Adapt to New Challenge - Case Study

    Established in 1934, Lindapter International is the world’s innovator of steelwork clamping systems, eliminating the requirement to drill or weld steel.  The company designs and manufactures specialist products for connecting structural steel sections together and  has more than 85 years’ experience in its field. The company’s success is the result of its dedication ...


    By Cirrus Research plc

  • Intro to Industrial Hygiene

    Let's take a peek behind the curtain of one of our practitioner specialties--industrial hygiene. Read on for an interview with one of Antea Group's experienced pros. What is Industrial Hygiene? Industrial hygiene is a science and art devoted to the anticipation, recognition, evaluation, prevention, and control of those environmental factors or stresses arising ...


    By Antea Group - USA

  • Ask The Noise Doctor: How Long will the Batteries Last in My Optimus Sound Level Meter?

    Do you have questions about your noise measurement instruments that Google or Wikipedia just can’t seem to answer? Ask The Noise Doctor. I’m here to answer your most frequently asked questions. Whether it’s product or application based, I’m up to the challenge. In this article I’ll be covering battery life in the Optimus Sound Level Meter range. A Commonly Asked ...


    By Cirrus Research plc

  • Casella BOUNDARY Guardian helps to control noise and dust on major London construction project

    Casella‘s BOUNDARY Guardian is helping to ensure noise compliance and control of air quality at BSkyB’s campus redevelopment site, bringing peace of mind to site operators, the client and the local community. The BOUNDARY Guardian is a system for web-based remote monitoring of noise and/or dust emissions that ensures compliance ...


    By Casella

  • Industrial hygiene assessment of a large chemical manufacturing facility – Case Study

    Challenge: Antea®Group was contracted by a large international chemical manufacturing organization to provide a plant-wide industrial hygiene assessment of chemical and noise exposures within their facility. The overall objective of the project was to evaluate worker exposures, compare results as to compliance with applicable regulations and guidelines, and to provide ...


    By Antea Group - USA

  • Noise at Work Regulations: 10 Years On

    Doesn’t time fly? It’s already been 10 years since Control of Noise at Work Regulations were introduced in the UK. But have you been following the legislation correctly? Here’s an overview of what the Noise at Work Regulations mean and some common mistakes you should be avoiding. Considering that legislation to limit ...


    By Cirrus Environmental

  • BS4142 Noise Impact Guidelines Are Beefed Up

    There has been an interesting update come across my desk this week relating to the BS4142 noise impact guidelines. Now, that may not sound the most exciting update in the world but for anyone who works in environmental noise, planning or development they need to sit up and take note. The British Standard (BS) 4142 guidelines currently determines the potential noise impact on residential ...


    By Cirrus Environmental

  • What are the 4 Different Types of Noise?

    Noise comes in all shapes, sizes and sounds. It’s part of our everyday lives but before you can accurately measure it, you need to know what the different types of noise are. Here’s my advice. Whether it’s the innocent beep, a plane flying overhead or heavy machinery in your workplace, you ...


    By Cirrus Research plc

  • New techniques to determine specific noise for increasing the effectiveness of continuous unattended noise monitoring systems

    Continuous, unattended noise monitoring systems can immediately alert you should noise levels exceed defined criteria. Once alerted to an exceedance, operators can act to return levels to compliance. This approach has two significant limitations. Firstly the operator can only take action after the breach has occurred and therefore systems are only able to inform owners about problems that have ...

  • Noisy work environment: alert, educate and prevent

    Communication about noise levels is the key to safeguarding hearing Noisy world, noisy work environment Millions of workers are affected by high noise levels in industrialised as well as un-industrialised countries around the world. Also millions are exposed to noise loud enough, around 80dB(A) – 85dB(A), that they have to raise their voices to hold a ...


    By Pulsar Instruments plc

  • New Facts on Noise-Induced Hearing Loss

    Do you spend more time worrying about noise at work? You are not alone. Noise-Induced Hearing Loss (NIHL) has become a major issue for all manner of businesses throughout the UK. Personal Injury Lawyers are now promising to fight for compensation under what they call industrial deafness but what are the facts? In total, it is estimated that 18,000 people currently suffer from noise-induced ...


    By Cirrus Research plc

  • Vibratec`s Continuous Efforts in Reducing Noise and Vibration

    As the well-known leader in the noise and vibration field, Vibratec has been working in improving the vibration level in electric vehicles with ADETEL Group and CEDRAT to commercialize a serie of vehicle from RENAULT. Vibratec has a level of technology that is better than the other key players of German's automobile industry, however, this know-how is still new and take efforts to be known and ...

  • Noise at Work: Frequently asked questions

    Controlling Noise at Work: Frequently asked questions Pulsar Instruments are the experts when it comes to noise at work measurement. The company was formed 45 years ago and, over the years, the team has answered numerous phone calls or met new and existing customers at Trade shows, professional meetings or in their place of work to answer their queries. Very ...


    By Pulsar Instruments plc

  • Industrial Noise and Vibration: High-speed balancing - Case Study

    Dynamic balancing of rotating elements is an important aspect of the manufacture and the repair of any turbomachinery. A rotating element that is out of balance can cause major operational difficulties, which may prevent the timely start-up of a facility. Furthermore, the unbalanced element can cause internal damage that will rob a machine of its design efficiency, reduce machine reliability, and ...


    By Sulzer

  • Noise at Work: Easier Noise Assessment & Control

    The Industrial Noise and Vibration Centre (INVC) Ltd has made its latest Digital Noise Assessment Template Available to all delegates who attend aFocus Health and Safety IOSH noise course. INVC have been providing a highly specialised acoustic consultancy service to a broad range of industries since 1985. They also deliver Noise at Work Risk Assessment and Control ...


    By Focus Health and Safety

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you