Machine Safety Articles

  • How to Maintain Fully Automatic Solder Printer Machine in Operation

    The dynamic maintenance of the automatic solder printer machine is called the dynamic maintenance of the solder printer machine. The maintenance of a machine at rest is called static maintenance. Static maintenance is the premise of dynamic maintenance, while the dynamic operation of the machine can in turn detect the level of static maintenance of the machine. Dynamic maintenance of fully ...

  • Central Bolt Automatic Assembly Line

    The central bolt automatic assembly line machine completes bolt assembly, detection, laser marking, data recording and other requirements, which is composed of spring base press-fitting station, valve sleeve assembly station, spring and valve core assembly station, laser ...

  • Going the Extra Mile in Quality Control

    More Than Just A Buzzword Quality control is a big buzzword in manufacturing.  The Google definition of quality control is “a system of maintaining standards in manufactured products by testing a sample of the output against the specification.” ...


    By Harmony Enterprises, Inc.

  • Documentary highlights the dangers of air pollution

    “Under the Dome" showcases huge problem in China The “fog” blanketing China most days used to be thought of as a natural weather phenomenon that couldn’t be helped. But since 2012, the words “smog”, “PM2.5”, “air pollution” and “fine particles” have become analogous to a nation’s struggle against an ...


    By Allerair Industries

  • Industry 4.0 Compliant Industrial Shredders

    To benefit from the 250% hyper-amortisation, machines purchased by the 31st December (20% down-payment) and delivered by the 30th September 2018 must have 5+2 requisites, as well as fall under Appendixes A and B of the law. The shredders fall under Appendix A. For software relating to the goods the amortisation is 140%. The legal representative must produce a declaration confirming ...


    By SatrindTech Srl

  • International Tire Recycling Spotlight: Venezuela

    Tire recycling is a serious global concern. Scrap tires take up far too much space, they can spawn devastating tire fires that burn for weeks or even months when stored together in large numbers, and they they leach chemicals into soil and groundwater. Recycling is an absolute necessity, but not easily done. Most developed countries have produced millions of scrap tires (at the very least), and ...


    By ECO Green Equipment

  • Revolutionary advances in safer tube and pipe machinery can be a direct result of the evolutionary nature of product development.

    It’s remarkable how fast changes occur in devices we utilize in our everyday lives. Living in an era of seemingly boundless innovation, new products are introduced and then continuously refined by driving forces such as competition, regulation, improved technology, liability, labor, material costs, and consumer demand. Amazingly, many life-defining inventions can progress from a creative ...


    By Tri Tool Inc.

  • Pump Maintenance in 7 Easy Steps

    When things are running smoothly it’s easy to overlook common maintenance chores and rationalize that it’s not worth the time to regularly inspect and replace parts. But nothing could be further from the truth. The reality is that most facilities have several pumps performing a variety of functions that are integral to the successful operation of the plant. If a pump malfunctions it ...

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • Keep your Guard Up around Machines

    What’s at Stake?  Exposure to unguarded or improperly guarded machines causes over 1000 deaths and 20,000 serious cuts, crushing injuries, scalpings and amputations every year. These injuries are gruesome, painful and often disabling and happen when working with any machine or tool that can punch, spin, rotate, shear, bend, cut, roll, grind or slice. ...


    By SafetySmart

  • Chainsaw Operating Tips and Chainsaw Safety

    Although chainsaws are excellent tools for wood cutting, the potential for accidents is high and severe injuries can result from improper use. Chainsaw safety should always be your first priority. By taking the necessary safety precautions, you will avoid serious injury. Take some time out before you use your new chainsaw to read the owner’s manual. If you’re very familiar with ...


    By DR Power Equipment

  • Curtailing Construction’s Fatal Four: Shrinking Struck-By Injury Incidents

    The “Fatal Four” of construction are falls, electrocutions, workers being caught in or between objects, and worker being struck by objects. In the United States, these hazards consistently account for over 50% of construction worker deaths annually. This translates into the deaths of over 899 workers on a yearly basis. In our four part blog post series, we will examine each hazard and ...


    By Intelex Technologies Inc.

  • Survival of antibacterial resistance microbes in hospital-generated recycled wastewater

    Hospital wastewater has the potential to be a threat to the hospital environment as it can contain pathogenic bacteria that may facilitate the resistant nature of organisms within effluent or water treatment plants. The recycling of hospital wastewater should have good quality. This study was carried out to highlight the incidence of antibiotic resistant bacteria in hospital-generated recycled ...


    By IWA Publishing

  • Choosing the Right Vibratory Sifter for Sieving Food Powders

    Food and beverage manufacturers have to adhere to extremely high standards of production quality, both to meet their regulatory obligations and to manage risk when bringing a product to market. Sieving and sifting food powders is a critical step in the manufacturing of several products, one that is responsible for filtering out fine impurities that can ...


    By VibraScreener Inc.

  • Confined Space Plan

    Create a Plan for a Confined Space Do you need to create a plan for your confined space plan? Confined spaces have limited space in that someone can enter, and are not designed to be occupied in the long-term. Your workplace may involve working somewhere that has dangerous substances, or serious hazards like exposed wires or unguarded ...


    By Civil Engineering Safety Ltd

  • High-powered laser for scientists

    STFC’s Central Laser Facility develops £10 million laser system Data analytics expert Tessella has helped the UK’s Central Laser Facility (CLF), part of The Science and Technology Facilities Council (STFC), in its development of an advanced high-powered laser, created to help aid R&D in the scientific community. CLF was tasked to develop a laser system for the HiLASE ...

  • High energy challenges

    The UK’s Central Laser Facility (CLF), part of the Science and Technology Facilities Council (STFC), has recently developed an advanced high-powered laser, created to help research and development in the scientific community. CLF was tasked with developing a laser system for the HiLASE research facility, and Tessella (an international analytics and data science consulting services company) ...

  • Food industry: Monitoring a fan imbalance - Case Study

    Equipment, Context: The Plant is located in Northern Europe, producing amino acids amongst other products. The site is operating 24/7 all year long. The fan (impeller) is supplying drying process with hot air. Fan is unique and doesn’t receive a deep prediction system or strategy. Fan bearing housing is equipped with a vibration ...


    By Wi-Care

  • Heavy Lifting with Cranes

    Extend extra care not carelessness For any kind of lifting due care and consideration of risks should never be disregarded; as loads increase so to do the risks and level of care required to manage safely with crane operation being one of the most precarious examples. Heavy lifting operations are considered to be complex for a ...


    By SHEilds Ltd

  • Estuary salinity prediction using a coupled GA-SVM model: a case study of the Min River Estuary, China

    Estuary salinity predictions can help to improve water safety in coastal areas. Coupled genetic algorithm-support vector machine (GA-SVM) models, which adopt a GA to optimize the SVM parameters, have been successfully applied in some research fields. In light of previous research findings, an application of a GA-SVM model for tidal estuary salinity prediction is proposed in this paper. The ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you