Only show results in Virginia? Ok

Noise Control Applications

  • Premium

    Shredders and crushers for refrigerator recycling

    Erdwich reclaims even Pentane and CFCs with 99% purity! Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Sound level meters & Noise dosimeters for Motorsport noise measurement and monitoring industry

    Our noise measurement instruments are used at high profile circuits and venues around the world, helping owners, operators, teams and officials comply with noise limits and regulations. With a range of noise measurement tools including drive-by test systems with permanently installed and portable monitors for continuous measurement of vehicles, to handheld sound level meters for pre and post race scrutineering, we can help you monitor and control your noise levels on track, in the pits and in the surrounding...

    By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.

  • System Integration Noise Solutions

    Environmental noise monitors that connect directly to process measurement and control systems. Many industrial plants have a variety of process sensors strategically placed around their site so that safety, environmental impact and efficiency can be monitored and managed, in real time, from one or more control rooms.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

  • Noise monitoring solutions for material testing

    With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

  • Noise monitoring solutions for urban noise

    The sounds in a city are central to our quality of life. Constant exposure to noise effects both our physical and psychological health, and our ability to learn and communicate.

  • Noise monitoring for industrial sites

    Industrial noise generated from plants, mills, refineries, shipping docks, utilities, and more, impact the quality of the surrounding community.  By controlling and monitoring this noise a community and industry can establish a working relationship that will benefit all.  An effective noise monitoring program will allow an industrial site to understand the noise sources and time periods that are causing concerns and then develop a plan for mitigation.

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • For Animal Shelters

    Troy Acoustics Corporation and the multi-faceted designs and products it produces are well versed in the requirements of animal shelters for the purpose of reducing objectionable sounds from within the facility and minimizing their transference to locations outside and adjacent to the shelter building and grounds.

    By Troy Acoustics Corporation based in Brunswick, GEORGIA (US) (USA).

  • Noise and vibration problem solutions for education sector

    Good acoustics is an important aspect of designing buildings for education, poor acoustics have a detrimental effect on the learning environment. The “Essex Study”

    By Acoustic Associates Sussex Ltd based in Shoreham Airport, UNITED KINGDOM.

  • Traffic noise monitoring

    Traffic noise impacts millions of people at home and at work. Traffic noise can impact your ability to work, learn rest, play, relax, and sleep. This form of noise can also lead to mental and physical health concerns. The noise is dependent upon such issues as: Traffic volume. Traffic Speed. Vehicle Content. Road Surface. Surrounding Area.

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • For Sports Facilities

    Troy Acoustics and its personnel have been involved in the Broadcasting, Movie and Recording industries for well over thirty years. Troy Acoustics has designed and installed acoustical treatments for dozens of facilities, for both new and updating purposes. The Troy System products, designs and installation techniques have provided quality, noise free, environments for all types of facilities where original programming is produced, enhanced or modified.

    By Troy Acoustics Corporation based in Brunswick, GEORGIA (US) (USA).

  • Noise monitoring solutions for Pass-by noise testing

    Traditional Field Pass-by measurements are still the only way to certify a vehicle for exterior noise emission during operation, but Indoor Pass-by provides an extremely powerful and repeatable method of troubleshooting exterior vehicle noise in the controlled environment ofan anechoic chamber.

  • Noise monitoring for railways and trains

    Controlling and monitoring railway and train noise in residential and urban areas is a critical function of a railway. The noise generated can be dependent upon the engine, rail cars, rail construction, train speed, and the horn. Modern high speed trains have also created new levels of high frequency noise that create an acoustic disturbance that sounds like an aircraft going by.

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • 2-Channel sound insulation for building acoustics

    Façade sound insulation is measured like sound insulation between rooms, except that one `room` is actually open space. The sound level is measured inside the receiving room and outside the façade of the building. The level difference is then corrected for the influence of the reverberation time and background noise level in the receiving room. Finally a single-number index is calculated by averaging over all the frequency bands. A loudspeaker source can be used for the measurement, giving a...

  • For General Industry

    Considerations for sound abatement abound within certain industrial facilities.  The new OSHA compliance mandates require noise control for employees and visitors to these facilities who may be exposed to continuous influences of high sound levels and reverberation properties, due to activities within these facilities.  Troy Acoustics™ provides the Troy System™ materials and design solutions, which have been proven to minimize the effects of these objectionable sound levels and their...

    By Troy Acoustics Corporation based in Brunswick, GEORGIA (US) (USA).

  • Noise and vibration pollution control for mining industry

    In a process unique to the mining industry, mineral ore must be extracted and conveyed to a means of transportation in a challenging environment. This involves the use of high-power fixed and mobile equipment with complex kinematics. The entire process is carried out in cyclic and variable operating conditions with significant safety and accessibility constraints. Mining operations are also a source of noise and vibration pollution both for site workers and people in the surrounding area.

    By ACOEM based in Limonest, FRANCE.

  • Noise monitoring solutions for room acoustics

    Room Acoustics concerns the way sound is created, propagated, perceived, measured and modelled inside enclosures. Enclosures can be dwellings, offices, workshops, factory halls, lecture rooms, auditoria, concert halls, transportation terminals, etc. Reverberation Time is the single most important parameter used to describe Room Acoustics, but in addition, parameters describing music quality and speech inteligibility are important.

  • Noise Monitoring for Motorsport

    Cirrus Environmental has been providing noise monitoring systems for motorsport noise measurement and control for a number of years and has supplied systems to some of the leading circuits around the world. Combining noise monitors with the NoiseHub software, we can provide a tailored package to meet your needs.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

  • Pulsar noise testing equipment for workplace sector

    Workplace noise monitoring is an interesting subject that can appear complex, but it is always worth remembering what you are trying to achieve. This can be summarised as: ““Minimising or avoiding the risk of noise-induced hearing loss in the workplace to comply with local, noise-based, legislation”” Such legislation is usually based on a European Directive that is then modified to suit the needs of each particular country. For example, in the United Kingdom, the ‘The Control of...

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Pulsar noise testing equipment for entertainment noise industry

    As of April 2008 the entertainment industry is now expected to comply with ‘The Control of Noise at Work Regulations’. Owners and venue operators are now legally obliged to ensure their workforce is protected from excessive noise levels. To help you understand the key issues, Pulsar Instruments Plc have produced a Free Information Pack detailing the new regulations and offering simple advice and answers to the most commonly asked questions.

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Variable frequency drive controls AC motors

    Consider integrating a variable frequency drive. It often can optimize energy efficiency by enabling you to match motor speed to the demands of the system. Look for opportunities, for example, to replace throttle valves or dampers used to restrict flow. However, a variable frequency drive may not make sense if the load on the motor is relatively small and constant — because speed changes will occur infrequently and any benefits from varying the speed will be negligible. So, thoroughly assess the system load...

    By Variable Frequency Drives based in NSW, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you