Only show results in Virginia? Ok

Noise Pollution Applications

  • Premium

    Noise modeling for noise consulting

    Noise planning that supports many governments and engineering associations worldwide. 

    By SoundPLAN International LLC based in Shelton, WASHINGTON (USA).

  • Premium

    Sound level measurement for safety regulations

    Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Geotextiles solutions for retaining structures areas

    In infrastructure projects in which space has to be saved or land acquisition minimized, TenCate Geosynthetic soil reinforcement technology has been used in the design and construction of steep slopes or walls. The use of this technology increases the stability of such structures.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Long term noise measurement for safety consulting

    Where unattended monitoring for longer periods is required to obtain more detailed information of the noise climate. Equipment is protected from the weather and powered for longer periods with options to remotely download data.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Short term noise measurement for safety consulting

    For environmental noise monitoring when short measurements are required using a hand held Sound Level Meter. This could be for boundary monitoring of industrial sites or noise surveys for planning purposes.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Noise monitoring for workplaces

    Measurement of the noise exposure of an individual over the working day. They should be used for mobile workforces where it is not always practical to measure with a hand held Sound Level Meter.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Sound instrumentation for industrial hygiene

    Industrial hygiene is separated into two main applications - Noise at Work and Human Vibration. Norsonic has during the past year expanded the product portfolio to cover both applications. By close cooperation with our customers and health and safety research institutes we have designed a carefully balanced selection of measuring tools and application software that covers both the vibration and noise domain.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Fence line monitoring around an industrial site or airport

    Monitoring the potential escape of pollutant gases from industrial sites or from airports can be difficult to achieve due to changing weather conditions, which may require a large number of monitoring stations downwind of the escapes.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Premium

    Sound instrumentation for measuring sound

    What is the difference between sound and noise? Clearly more than the loudness only. Although an aircraft is very noisy, a mosquito at night-time can be more than enough to spoil a good night`s sleep. Instead of looking at the loudness only as a criterion for the degree of noisiness, we shall simply regard noise as what it is - viz. unwanted sound.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Ambient air quality monitoring at airports

    To measure the ambient air quality at airports is a challenge. The monitoring site needs to be representative for background levels and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high availability. The OPSIS DOAS system provides the user with a fast system that gives high availability at low cost. The impact of aircraft take-offs and landings can easily be followed on-line. The OPSIS system can also monitor fugitive emissions from other sources at the airport.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Air quality management at airport consultancy

    We provide consultancy on aviation and air quality, such as dispersion modelling and emissions inventory compilation for environmental impact assessment at airports. We also conduct research into aviation.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Sound instrumentation for building acoustics

    The field of building acoustics consists of two parts; Room Acoustics which deals with sound propagation in a room and Building Acoustics, which deals with sound propagation between rooms. Typically, room acoustics is related to the quality of sound, e.g. concert hall acoustics, while building acoustics is more related to unwanted sound, i.e. when you want to hear as little as possible of what is going on in adjacent rooms. From a measurement technology point of view, the two have a lot in common which shall be outlined here.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Emissions Monitoring for Airports

    Opsis systems provide high-performance monitoring of the emission activities within an airport. The rapid system allows on-line monitoring of the emissions from each aircraft at take-offs and landings, monitoring of fugitive emissions from stationary sources and differing of the airport sources from the surrounding pollution sources.

    By Opsis AB based in Furulund, SWEDEN.

  • Noise and vibration problem solutions for education sector

    Good acoustics is an important aspect of designing buildings for education, poor acoustics have a detrimental effect on the learning environment. The “Essex Study”

    By Acoustic Associates Sussex Ltd based in Shoreham Airport, UNITED KINGDOM.

  • Noise Monitoring for Transport

    A range of noise measurement instruments, all fully weather protected for reliable long term operation, that are ideal for transport noise measurements. Whether it’s for short term handheld measurements or longer term noise monitoring applications, Cirrus Environmental can offer a solution.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm’s relationship with the community and with the local regulatory organizations. 

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Indoor air quality (IAQ)

    Indoor Air Quality (IAQ) refers to the effects on human health of various factors that are properties or constituents of the air we breathe and generally indoors. Very briefly, we can say that a series of events led to the finding that many chemical or biological substances can be inhaled which can cause various health problems which start as simple disorders but lead to serious illnesses. Of similar importance are several natural parameters of the so-called `interior environment`.

    By Dimtech S.A based in Keratsini, GREECE.

  • For Sports Facilities

    Troy Acoustics and its personnel have been involved in the Broadcasting, Movie and Recording industries for well over thirty years. Troy Acoustics has designed and installed acoustical treatments for dozens of facilities, for both new and updating purposes. The Troy System products, designs and installation techniques have provided quality, noise free, environments for all types of facilities where original programming is produced, enhanced or modified.

    By Troy Acoustics Corporation based in Brunswick, GEORGIA (US) (USA).

  • Noise Monitoring for Industry

    For Industrial Noise Monitoring applications, Cirrus Environmental can supply a range portable, semi-permanent or permanent noise monitors as well as the MK:427 NoiseSensor for integration into existing data logging systems.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you