Radiation Monitoring Applications

36 Results found
Only show results in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: Radiation Monitoring ×

Posi-Shell Coatings

by LSC Environmental Products, LLC     based in Apalachin, NEW YORK (USA)

Posi-Shell erosion control coatings are the perfect low-cost solution to protect and stabilize slopes. Our long-term coatings are spray-applied and allow engineers or operators to protect acres (hectares) of slope in a single day. The finished coating is durable and textured, reducing water energy across large areas. The final product eliminates erosion, siltation, and (as a result) expensive rework. The product can be designed to last for years and is easily tracked into slopes when intermediate protection is no longer necessary. Indeed, when integrated, Posi-Shell actually improves soil quality by conditioning it for future seeding. Posi-Shell’s simplicity and durability make it tremendously effective at controlling windblown dust, infiltration, or runoff associated with clean or contaminated stockpiles. Unlike cumbersome tarps or geo-membranes, Posi-Shell erosion control coatings are spray applied and do not require any ballast. Posi-Shell conforms and adheres to any topography and delivers 100% clean runoff. Stockpile loading or removal is accomplished by breaking into the coating where desired. Active areas may be left open or quickly resealed if required. Posi-Shell erosion control coatings are ideal for protecting expensive piles of salt, coal, or cement clinker; and are used extensively for containing hazardous or radioactive soils.

Environmental solution for radionuclide monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides.

Radionuclide Monitoring for Nuclear Power Plants

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

Radiation monitoring instruments for the homeland security & military industry

by Technical Associates     based in Canoga Park, CALIFORNIA (USA)

Technical Associates provides some of the best radiation detection and measurement equipment for Homeland Security. The TBM-3SR, or the Digital Version TBM-3SR-D, is cited by experts for use on every Fire Truck in the United States. The DSI-2 measures background radiation detecting any elevation in radiation. The DSI-2NT Series detects both fast and slow neutrons and model DSI-2GN detects and measures Gammas and Neutrons (Fissile Material).

Electrical Based Tomography Systems for Interface Detection

by Industrial Tomography Systems plc (ITS)     based in Manchester, UNITED KINGDOM

Level detection is a very widespread measurement requirement. Whilst there are many techniques for detecting liquid surfaces, it is much more challenging to identify the interface between liquids and other systems.

NORM Waste

by econ industries GmbH     based in Starnberg, GERMANY

Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

Recycling equipments for shredding hazardous waste

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

Radiation Monitoring for Nuclear Military Sites

by Saphymo     based in Montigny Le Bretonneux, FRANCE

Deterrence is the cornerstone of Defense, reflected in today`s nuclear military vehicles (submarines, aircraft carriers, aircraft, etc.) and sensitive sites. Defense calls on Saphymo`s exhaustive product range to secure its personnel and equipment and shoulder the emergency services in case of a CBRN threat. All military units are required to be fitted out with detection and decontamination devices, and possess the special expertise needed to manage exceptional events. Nuclear military sites must also be equipped with specialist monitoring devices. Dosimetry, survey meters, access control, Radiation Monitoring Systems, environmental monitoring networks and numerous other solutions offer valuable decision-aid tools, providing fast and accurate information and easier situation assessment.

Radiation Monitoring for Nuclear Power

by Saphymo     based in Montigny Le Bretonneux, FRANCE

The nuclear industry, including power plants, research centers and fuel cycle specialists are obliged by law to protect their staff, local populations, the environment and the processes they employ. With this in mind, Saphymo has developed a full range of dedicated products and systems, and plays a major role in radiation protection and ionizing radiation monitoring in both France and on an international scale. Saphymo constantly strives to satisfy safety requirements to the full, reinforce its technological know-how in the management of complex systems and anticipate customer needs, and offers adapted solutions in the fields of operational dosimetry, Radiation Monitoring Systems, contamination control, access control, environmental protection and survey meters. Saphymo also offers a broad panel of services intended to maintain its products in operational condition.

Waste recovery for nuclear wastes

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large storage casks, where it can be held for thousands of years. A challenge for the nuclear industry is the cost associated with conditioning, packaging and storage of these heterogeneous wastes. Therefore, a solution that can decrease the volume of nuclear waste, and reduce the amount of storage required, is considered a commercially advantageous option.

Digital Pathology

by Excelitas Technologies     based in Mississauga, ONTARIO (CANADA)

Digital Pathology is an image-based information environment enabled by virtual microscopy. This involves imaging glass slides and saving and distributing their digital images for analysis, archiving and storage. The virtual microscopy slides are: •Scanned — using a microscope based scanning device that takes images of the whole slide via large scanning or stitching of smaller scans. This involves a motorized stage to scan the whole slide. Light source stability is important for scanning in order to prevent illumination variation across the whole scan. The X-Cite® exacte is commonly used in slide scanning systems. •Viewed — on a computer via viewing software •Managed — some of the slides have a barcode that is also scanned to enable archiving with patient information •Analysed — using image analysis tools and software, structures maybe automatically identified and quantified •Shared — digital pathology files may be shared over a network to gather additional expert opinion Digital pathology technology in no way replaces the expert eye and diagnosing power of a pathologist and a doctor. The only thing it saves is time to image the samples and also provides an efficient and organized way to archive the virtual microscopy slides for future consultations, record-keeping and disease comparison.

Meteorological Monitoring

by FTS     based in Victoria, BRITISH COLUMBIA (CANADA)

FTS designs complete, turn-key systems for a variety of environmental monitoring applications. Our systems are based upon the Axiom datalogger—a key technology that deliver rugged reliability in any environment, simplicity of operation, low maintenance costs, and extremely accurate data.

Flow & Energy Management Solutions for food and beverage

by Spire Metering Technology     based in Marlborough, MASSACHUSETTS (USA)

For food and beverage processing plants, engaging in blending and batching of foods and drinks where issues of hygiene and contamination are of major concern. Also good for measuring the raw materials used for production.

Radiation monitoring instruments for the Nuclear power industry

by Technical Associates     based in Canoga Park, CALIFORNIA (USA)

Air-stack-liquid effluent for PWR and BWR Nuclear Power Plants.

Positive displacement pumps for biopharmaceutical industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

Pharmaceutical and biotechnology processes demand sterility and precision in order to ensure the integrity and quality of the end product. Fluid isolation, and precise metering are essential.

Circuit Board Cleanliness Testing

by Myron L Company     based in Carlsbad, CALIFORNIA (USA)

Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L Company Ultrameter II™ 4P or 6P, a suitable container, and a mixture of Dl (deionized) water and alcohol.

Need help finding the right suppliers?

Let the XPRTs do the work for you