Only show results in Texas? Ok

Refrigerant Gas Monitoring Applications

  • Premium

    SF6 Leak Detection

    Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool...

    By LumaSense Technologies, Inc., An Advanced Energy Company based in Milpitas, CALIFORNIA (USA).

  • Premium

    Leak detectors for power generation industry

    Our range of SF6 equipment can detect tiny leaks from high voltage switchgear. SF6 gas is both expensive and incredibly dangerous so measurement is vital where personal exposure may occur. Inspection pits can house our fixed SF6 alarming system, the SF6 Areacheck P2. This means that engineers can guarantee they are not entering a confined space which contains SF6 gas.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Premium

    Testing Fume Hood Flow Dynamics using SF6 as a Tracer Gas

    A safe laboratory environment requires an effective method for clearing toxic material from fume hoods. Since all handling of toxic materials is completed in these hoods, it is critical to have a procedure to evaluate their operation to assure adequate protection for laboratory workers. The InfraRan Specific Vapor Analyzer, factory calibrated for SF6, is an ideal instrument for measuring fume hood efficiency in accordance with ASHRAE and other standards. Manufacturers identify the flow dynamics (factors that...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Portable Gas Leak Detector for Combustion Gas Leak Detection

    In recent years, combustible gas leak detection has grown in importance because of increased safety concerns, performances of products/systems, liability concerns, health concerns, and warranties. Gas leak detection is a way of nondestructive testing of dangerous combustible gases from sealed components or systems. Leaks can easily result from poor seals and connections, as well as from inadequate welds. Slow gas leaks from small defects or vibrations can be dangerous, expensive, frustrating, time consuming, and...

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Gas detection & hazardous gas monitoring equipments for brewing and bottling

    Carbon dioxide (CO2)is a byproduct of the fermentation process, as well as being used in carbonation. Carbon dioxide leaks could result in over exposure to employees, as well as possible product damage.

    By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).

  • Ultra High Sensitivity Gas Leak Detector for National Engineering Laboratory for UHV Engineering Technology (Kunming)

    National Engineering Laboratory for UHV Engineering Technology (Kunming) is an important establishment for research on UHV AC and UHV DC transmission and transformation technology at high altitude(2100m).

    By D-Industrial Technology (Shanghai) Co.,Ltd. based in Songjiang, CHINA.

  • Gas detection & hazardous gas monitoring equipments for mechanical/chiller rooms

    The release of refrigerant gases into the environment can be harmful to both the potential occupants of the space, as well as to the environment in general. Chlorofluorocarbons, commonly known as CFCs, which were formerly considered relatively safe, are now known to be a key contributor to the thinning of the ozone layer. These are gradually being replaced by more environmentally friendly refrigerants such as R134a. This however, does not lessen the need for leak detection. Regardless of their reduced impact on...

    By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).

  • Infrared sources for industrial and safety sector

    Axetris infrared sources are used in a variety of industrial applications: Combustible and Toxic Gas Detection, Refrigerant Monitoring, SF6 Monitoring, Fruit Ripening Monitoring, Flame Detection, Liquid Analysis using Attenuated Total Reflection ATR, Semiconductor Fabrication.

    By Axetris AG based in Kaegiswil, SWITZERLAND.

  • Ndir Refrigerant Sensors for Refrigeration and Air Conditioning Technology

    Refrigerants such as R134a, R125, R404a and many others used in refrig-erants are combustible and extremely harmful to the environment. In accordance with the EU F-Gas Directive, refrigerating systems must therefore not only fulfil stringent leakage control requirements, but must also be equipped with a leak detection system for HHC refrigerants.

    By smartGAS Mikrosensorik GmbH based in Heilbronn, GERMANY.

  • Gas Analysers for Medical

    Medical applications utilising gases are wide and varied and include patient care, research and the manufacture of pharmaceutical products. Commonly used within the electrical industry as an insulating medium, the properties of sulfur hexafluoride (SF6) gas also make it ideal for use within medical applications such as ophthalmology.

    By Rapidox is a brand of Cambridge Sensotec based in St. Ives, UNITED KINGDOM.

  • Gas Analysers for Electricity

    Dielectrics used within electrical equipment must possess certain characteristics such as; provide thermal conductivity to dissipate heat, have excellent insulating properties to quench arcs, be chemically stable and have a low toxicity. SF6 gas is unique in that it meets all the stated requirements and is therefore an essential component within the power transmission and distribution network.

    By Rapidox is a brand of Cambridge Sensotec based in St. Ives, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you