Only show results in Connecticut? Ok

Safety Monitoring Applications

  • Premium

    Temperature measurement and control devices for aircraft & aerospace industry

    TTEC manufactures T/C`s & RTD`s for a variety of Aircraft & Aerospace Applications, including Test Stands, Environmental Chambers and Heat Treating Furnaces for Aircraft Components. NIST Traceable calibration tests and material tests reports are available as required. TTEC Style 8012 RTD`s with DIN Class A special accuracy are use to precisely measure Environmental Chamber Temperatures. These Chambers re-produce in-flight conditions that aircraft parts will be exposed to. Accurate & Stable readings...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Temperature measurement and control devices for pulp & paper mills industry

    TTEC thermocouples and RTD`s for Pulp & Paper Mills are used in many applications plant wide to monitor critical plant temperatures, improve performance, enhance safety and reduce fuel costs and plant emissions. These applications include measurements in Recovery Boilers, Lime Kilns, Bearings, Dryers & Stacks.

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Portable and fixed gas analysers for medical gas monitoring

    Geotech supports the monitoring of medical gases within dentistry, hospital and veterinary industries with hand held N2O, O2, CO2 and CO analysers.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Gas analyzers for clean air room monitoring

    The ambient air in clean air rooms needs to be constantly monitored for the safety of workers and of the production according to the environment. A clean air room is a room where the concentration of particles is controlled in order to minimize the introduction, the generation, retention of particles inside, for instance for chip production or the production of medicines.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Oxygen Monitoring from Aerobic and Anaerobic for determination of biodegradation kinetics by respirometry

    Intrinsic kinetic tests involve adding relatively high concentrations of organic substrate to small concentration of acclimated microorganisms so that the COD/VSS ratio typically is greater than 10. Kinetic parameters are then determined by non-linear modeling using well-known relationships between biological growth and oxygen uptake.

    By Respirometer Systems and Applications, LLC based in Fayetteville, ARKANSAS (USA).

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for anesthetic gases

    The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane,...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for nickel refining

    The mining industry uses chemicals as ‘flotation’ agents in the recovery of sulphide minerals containing metallic elements (e.g., copper, nickel, silver, gold) from ore slurries. Sodium ethyl xanthate (SEX) is one of most common flotation agents, and it decomposes to form ethanol, carbon disulfide CS2, and Carbonyl Sulfide COS. These harmful gaseous compounds must be monitored from the indoor air at the enriching plant.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas analyzers and monitoring systems for fire & material testing

    Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Industrial stack emission TOC monitoring

    By Pollution S.r.l. based in Budrio (Bologna), ITALY.

  • Premium

    Industrial hygiene - personnel safety gas analyzers for industrial air monitoring

    Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration range,…).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Air sampling & monitoring systems for emergency response industry

    From portable hand held battery operated to rugged field deployable air sampling systems, Emergency Response and First Responder Team’s worldwide rely of HI-Q air sampling systems & accessories during emergency response situations for reliable protection of personnel from Nuclear Biological Chemical Threats. HI-Q’s emergency response air sampling kits have offered First Responders and other Emergency Response teams a way of recognizing, determining and identifying the presence of harmful Biological...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Air sampling & monitoring systems for fire & police service

    Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real. Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Oxygen monitoring from aerobic and anaerobic for toxicity test

    Toxicity of pure chemicals is assessed using respirometers by adding increasing concentrations to an active culture. The concentration at which oxygen uptake or gas production begins to decrease is known as the “threshold toxicant concentration.”

    By Respirometer Systems and Applications, LLC based in Fayetteville, ARKANSAS (USA).

  • Premium

    Gas monitoring instruments and systems for fumigation

    Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Surface water and water conservancy monitoring solution

    Surface water and water conservancy monitoring is an important foundation work for reasonable utilization and protection of the nation water and soil resources, is a foundation of science management and protection of water ecology, water resources, water safety. The purpose of water quality monitoring is timely, accurate and comprehensive reflection of water environment quality present situation and developing trend, providing scientific basis for water environment monitoring, management, planning, pollution...

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Gas analyzers and monitoring systems for First response

    The first response encounters hazardous gases that need to be identified quickly. Gasmet manufactures portable and powerful gas analyzers for these crucial measurements. Measure a vast variety of gases simultaneously, on-site. Read about our solutions for First Response!

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you