Safety Regulations Applications

20 Results found
Only show results available in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: Safety Regulations ×

Chemical Water Treatment for swimming pool water

by Kurita     based in Ludwigshafen, GERMANY

Kurita Water Solutions offers a wide range of products for the water treatment in swimming pools. These products have proven their efficiency over many years. The swimming-pool product range gives you the opportunity to choose your own maintenance program and allows you to operate your swimming pool hygienic and with no harm to human.

Water treatment chemicals for power plants industry

by Kurita     based in Ludwigshafen, GERMANY

Today’s power industry is already subject to strict official regulations. These rules will only become more stringent in the future. As a result, environmentally friendly, cost-effective solutions that ensure plant and operational safety are in high demand.

Process Control for the Petrochemical Chemical Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Instrumentation, analyzer systems and process optimization are not new to the operation of all chemical and petrochemical processes.

However, tightening regulations, competition pressure and increasing raw materials cost urges the industry to go deeper into process control technology. As a single-source supplier of the (petro)chemical industry since many years, AppliTek has supplied them many analyzer systems for monitoring chemical parameters in all sorts of applications, from the actual production step to peripheral treatment processes. Our application people and engineering department understand your needs and translate them into real solutions.

Sound level measurement for safety regulations

by Casella     based in Kempston, UNITED KINGDOM

Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

Meteo Information for Safe Operation

by Mierij Meteo b.v     based in De Bilt, NETHERLANDS

In the industry segment meteo information is essential for safe operation. To deal with emergencies, accurate real-time information on wind conditions (direction and speed) is crucial. In some cases we feed this data directly into safety applications which models and predicts the progression of released gas clouds.

Large waste bins for councils and municipalities and the industry

by P. Henkel GmbH     based in Kreuztal, GERMANY

Absolutely hygienic, stable and cost-efficient. The MGB with spherical base represents hygienic waste disposal of residual and organic waste as well as food waste. The dustbins are optimised for side loaders. Cost benefits for councils and municipalities as well as private waste management companies. Absolutely low-noise, serially only 89 dB in accordance with EU outdoor noise directive 2000/14 EC at the MGB 120-KB and 91 dB at the MGB 240-KB. High operational safety.

Laboratory evaporation for pharmaceutical laboratories

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

Air permit compliance

by Perillon Software Inc.     based in Acton, MASSACHUSETTS (USA)

A centralized solution for permit regulatory tracking against limits and obligations.

Safety Relief Valves

by Seetru Limited     based in Bristol, UNITED KINGDOM

Safety Relief Valves The Seetru range of safety valves for compressed air and gas are compact, highly efficient and incorporate the exclusive Tutchtite– seal technology for repeatable bubble-tight sealing performance: designed for applications including air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc. These valves are manufactured in bronze, brass or stainless steel and offer a wide range of connections, for applications up to 250°C. Manufactured in accordance with a wide range of international standards and approvals such as TÜV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, EAC customs union (Russia, Belarus and Kazakhstan), the Canadian CRN and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked). LGS™ Valve Range - Our newest range is designed to be a multi-purpose device suitable for a a wide range of applications.

Environmental Reporting

by Quantum Compliance     based in Ann Arbor, MICHIGAN (USA)

The Q EHS Environmental Reporting suite provides key tools for compliance with environmental legislation pertaining to the management, storage, use release, and disposal of hazardous materials. The software was developed to produce a variety of practical reports such as: • Performance and compliance assessments • Regulatory report submittals • Metrics and trend analyses for facility, divisional, and corporate management • On-site environmental incident occurrences Q EHS Air - Q EHS Waste - Q EHS Water - Q EHS Hazardous Materials Allow you to: • Associate and roll up usage data to appropriate unit - Business - Group - Sector - Division - Geographic - User-defined parameter • Estimate expected and potential emissions from various sources • Establish operating limits for automated checks and warning messages

Aerosol and particle technology for operational safety industries

by Palas GmbH     based in Karlsruhe, GERMANY

During the production, the conveyance and the filling of solid particles in the form of powders, bulk materials, granulates, pellets and many other shapes, dust is generated as a rule. This dust formation can lead to an impairment of the operational safety and the reliability of the production process, e. g. by means of inhalable dust fractions. The workplace hygiene can also be endangered, e. g. through dust accumulations.

LIMS Solutions for the Chemical, Petro-chemical & Oil Industries

by Autoscribe Informatics     based in Reading,, UNITED KINGDOM

It is vitally important for today’s Petro-Chemical and Oil manufacturing industries to control the cost efficiency of their operations for investor interests and environmental impact equally.  Their laboratories are central to controlling production and most importantly need to provide accurate, transparent and traceable data. All production processes and product quality must adhere to stringent manufacturing regulations; therefore it has become more and more apparent that LIMS are the only way of controlling the manufacturing of Oils and Petro-Chemicals.

Emissions Management

by VisionMonitor Software, LLC     based in Houston, TEXAS (USA)

VisionMonitor Software offers a variety of environmental solutions to assist corporations with management of their regulatory compliance requirements. These solutions allow management to respond quickly with more informed decisions by tracking data events, scheduling compliance activities, and targeting the delivery of information through KPI`s, alerts and best practice workflows using the portal presentation mechanism included in our Real-Time Environmental Performance Suite.

Tank & tote cleaning

by NLB Corp.     based in Wixom, MICHIGAN (USA)

Problem: Manual cleaning of tanks and totes used to ship and store plastics and chemicals can take many hours. It also requires people to work in confined spaces, which is discouraged by today’s safety regulations.

Water treatment chemicals for the chemical and pharmaceutical industry

by Kurita     based in Ludwigshafen, GERMANY

Resource consumption in the chemical industry is enormous. Although the industry has already succeeded in significantly reducing its energy demands, it remains challenged by high energy costs, high water consumption and increasingly stringent regulations. Energy efficiency, increased production and plant availability are therefore important factors contributing to a competitive advantage. We would be glad to support you. Kurita offers a broad spectrum of resource-saving solutions as well as solutions for improving production and plant safety.

Air monitoring equipments for material emissions and product testing

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into the air we breathe. The REACH regulation places the responsibility on manufacturers and importers to test their products and provide safety information to the purchaser, end user or consumers.

Chemical Water Treatment for drinking water

by Kurita     based in Ludwigshafen, GERMANY

Kurita specifically developed product ranges for drinking water treatment, in order to avoid any kind of problem that might occur with the preparation, transport or use of drinking water. Our technologies can be used for all kinds of conditions, from municipal water suppliers to private buildings (e.g. hotels, universities, hospitals and private homes).

Need help finding the right suppliers?

Let the XPRTs do the work for you