Only show results available in Virginia? Ok

Safety Storage Applications

  • Geosynthetic Lining for Secondary Containment

    GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Residential and Commercial, Underground Thermal Energy Storage

    PROJECT OVERVIEW: Large residential and commercial project in London, overlooking the Thames. A 2.9MW cooling and heating aquifer thermal energy storage system for five mixed-use buildings including over 200 luxury apartments.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Oil skimmers for petro chemical industry

    The Mop type Oil Skimmer has many submissions in refinery plants. Some applications are comprised of cooling ponds, waste water, storage tanks etc. Due to its flexibility the Mop Skimmer can be functional to nearly any application during a refining plant where the fluctuating liquids and water needs separation. Ambar is experienced with explosion proof systems specifically designed for the Petro Chemical waste water applications.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Premium

    Odor Control for Tank Cleaning

    When It Comes To Odor Management, Simply Cleaning The Tank Isn’t Enough To Remove The Odors

    Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for the petroleum processing and petrochemical industries

    The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Storage and Loading Areas

    The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and consultation phase.

    By EmiControls based in Bolzano, ITALY.

  • Pulsair`s industrial mixers for chemical industry

    Pulsair Systems supplies chemical mixing equipment for the worldwide chemical industry. Pulsair has designed and manufactured industrial chemical mixing and blending equipment for over 25 years. Our non-shear industrial chemical mixing systems are highly energy efficient, easy to use and maintain, cost-effective and well suited for any chemical storage tanks and mixing process regardless of the chemical tank size, number of tanks or viscosity of the chemicals. Pulsair offers a full range of chemical equipment tank mixers for both chemical production and storage tanks that include a 5 to 55 gallon drum mixer, a tote mixer (stainless steel, plastic, cardboard or `bag in a box`) and an IBC mixer (Intermediate Bulk Containers). For larger individual chemical mixing tanks as well as tank farms, we offer custom built mixing solutions.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Safety Relief Valves

    Safety Relief Valves The Seetru range of safety valves for compressed air and gas are compact, highly efficient and incorporate the exclusive Tutchtite– seal technology for repeatable bubble-tight sealing performance: designed for applications including air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc. These valves are manufactured in bronze, brass or stainless steel and offer a wide range of connections, for applications up to 250°C. Manufactured in accordance with a wide range of international standards and approvals such as TÜV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, EAC customs union (Russia, Belarus and Kazakhstan), the Canadian CRN and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked). LGS™ Valve Range - Our newest range is designed to be a multi-purpose device suitable for a a wide range of applications.

    By Seetru Limited based in Bristol, UNITED KINGDOM.

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours. We offer dosing options are designed to meet all safety requirements and sized to meet your specific process and dosage rates requirements. Our Applications Engineers and Equipment and Engineering Services teams will provide timely and thorough applications assistance and technical support during the entire project. Download the Rapid Response Solutions Brochure (PDF) Sample Applications Examples of where our Rapid Response Program has successfully addressed treatment challenges include the following: Temporary application of hydrogen peroxide as a source of supplemental dissolved oxygen in biological treatment systems during periods of excessive BOD loading Hydrogen peroxide pretreatment of high strength wastewater to reduce toxicity or BOD/COD prior to biological treatment Emergency hydrogen peroxide treatment of lagoons or ponds to control hydrogen sulfide and other odors Shock cleaning of cooling water systems for biofouling and slime control

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Water measurement systems & sensors for flow measurement

    The recommended type of measurement system will depend on several site-specific factors such as :-

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Wireless industrial I/O applications for process control

    Banner Engineering`s SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these examples of wireless installations for process control.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Gas detection analyzers for storage

    Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Emissions testing for engines

    Rich-burn engine exhaust, when uncontrolled, can have wide concentration ranges and both CO and NOX can fluctuate significantly. The on-board CO dilution system will automatically set-up for optimum testing, perfect for a rich burn engine. Lean-burn engines have different exhaust characteristics, but NO2 can make up a significant portion of the total NOX measurement. The 350 measures both NO and NO2 for proper lean-burn engine set-up. Due to high concentration, replaceable interference filters keep the sensors stable and your readings accurate. High exhaust pressures and heavy particulate loading are easily controlled with the special pressure relief valve (standard) on the engine probe configuration.

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • Construction of Containment Structures

    Manufactured synthetic lining products have allowed for efficient design and construction of containment structures such as ponds, lagoons, landfills, tanks and secondary spill containment facilities, including vapour management systems. Because of the wide variety of project conditions and materials being contained and with so many liner types to choose from, the design and selection of the appropriate lining materials can be a complex task.

    With over 25 years of experience in geomembrane containment technology, Nilex offers design assistance, fabrication, installation and construction services for containment applications. The Nilex containment technology process involves compatibility testing and the consideration of facility design and climatic factors.

    Nilex professionals will work with the owner, engineering consultant and the general contractor to ensure the optimum design with the most efficient and cost-effective installation for the containment application.

    Learn more about our products and services for Primary Containment, Secondary Containment,Tank Lining, Vapour Management Systems, Installation Services and Covers.

    By Nilex based in Edmonton, ALBERTA (CANADA).

  • Premium

    PEHD membrane sealing systems for storage areas

    Areas used to store substances which could represent a hazard if they escape into groundwater must also be leakproof in case accidents occur.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Premium

    Production waste and hazardous waste shredding with Mercodor shredding systems

    Mercodor crushing machines are used for crushing production waste and also for the volume reduction of hazardous waste. In order to a better storage of production and hazardous waste the volume must be reduce. Mercodor special engineering is your partner for professional shredding of production waste and for the crushing of hazardous waste.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Markthal: Aquifer Thermal Energy Storage

    PROJECT OVERVIEW: The iconic Markthal in Rotterdam. Supply of unique 0.4mm vertical slot PVC screen for the Aquifer Thermal Storage Energy system at Markthal, a 95,000m2 residential and commercial building with an indoor market hall.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you