Only show results in Texas? Ok

Smoke Monitoring Applications

  • Premium

    Industrial monitoring solutions for the opacity and dust monitoring areas

    There is a requirement for many small boiler operators to monitor Opacity to determine the smoke density emitted from the boiler. On small boilers we recommend the DCEM 1001 Opacity monitor; this simple, low cost monitor has high efficiency air purges use compressed air to ensure that optical surfaces are virtually free of dust or debris contamination. This ensures minimal maintenance is required on the sensors.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    CO gas monitoring for coal pulverising mills

    Our range of safety analysers can offer early detection of fire / explosive conditions. From CO monitors for pulverising coal mills through to UV flame and smoke detectors installed on oil rigs and the cross-channel passenger shuttles, operated by Eurotunnel.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Fire detection solutions for the oil rigs areas

    The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Tunnel solutions for the visibility monitor areas

    The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Fiber reinforced polymer solutions for mass transit industry

    Enduro provides several products for the mass transit market including third rail cover board.

    By Enduro Composites based in Houston, TEXAS (USA).

  • Premium

    PTR-MS systems for medical applications

    PTR-MS are powerful tools for non-invasive, real-time breath gas analysis with many applications, such as screening for disease markers, study of pharmacokinetics or metabolic processes.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Water monitoring instruments for communications & broadcast

    Servelec Technologies provides highly configurable intelligent monitoring and automation technologies solutions for communications and broadcast applications. Our software and hardware systems are engineered to provide you with immediate notification of alarms and other live conditions, which help to reduce downtime and enable more efficient preventative maintenance scheduling.

    By Ovarro (formerly Servelec Technologies & Primayer) based in Eckington, UNITED KINGDOM.

  • Premium

    Water monitoring instruments for built environment

    We recognise the potential for you to be able to integrate intelligent automation and remote access for the control of building security, heating, ventilation, air conditioning and lighting. That is why we are at the heart of the development of the machine-to-machine (M2M) trend.

    By Ovarro (formerly Servelec Technologies & Primayer) based in Eckington, UNITED KINGDOM.

  • Premium

    Water monitoring instruments for mining & mineral exploitation

    We can provide you with the systems that offer exploration, extraction, water supply, mine operations, rail transport, and environmental reporting.

    By Ovarro (formerly Servelec Technologies & Primayer) based in Eckington, UNITED KINGDOM.

  • Laser Based Remote Sensing Instruments for Wildfire Detection Industry

    Many scientific studies have proclaimed the feasibility of using a LIDAR to detect wildfires. As a LIDAR manufacturer with more than a decade of experience, Raymetrics has begun working to turn this scientifically proposed method into a reality using a modified 3D scanning LIDAR.

    By Raymetrics S.A. based in Athens, GREECE.

  • Particulate monitoring for continuous emissions

    With the advent of specific process emission limits being defined, continuous particulate monitoring has become a regulatory requirement for many industries. smoke stack #1Particulate monitoring requires the measurement of the mass concentration of particulate matter in stack emissions to atmosphere. There is no known method of continuously measuring particulate concentration by direct measurement and therefore, all continuous particulate measurement methods are inferential. Each method involves the measurement...

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Laser Based Remote Sensing Instruments for 3D cloud base

    Cloud base height is currently measured using ceilometers, which are in reality low spec LIDAR systems. LIDAR is therefore already the standard method of determining cloud base height.

    By Raymetrics S.A. based in Athens, GREECE.

  • Smoke generator device for fire training, emergency evacuation & BA training

    The Fire Training Range, designed and manufactured by Concept, has been developed to add realism to training scenarios or any type of fire safety training. For complete portability, unbeatable reliability and quality smoke output, the Colt 4 Turbo is in a class of it`s own. For large scale applications the ViCount is the ultimate choice for fire training. With almost 50 years experience in the generation of artificial smoke for fire brigades, Concept are in an unrivaled position to supply the equipment and advice...

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Smoke generator device for leak testing & building envelope testing

    Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak.

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Smoke generator device for hot fire training

    Concept`s ViCount smoke generators are installed throughout the world in quality hot fire training centres - providing the most realistic artificial smoke effect possible. They are also used to add smoke during carbonaceous burns. The majority of fire training centres and schools use gas to replicate the appearance and heat of a real fire but one thing gas doesn`t produce is smoke! The ViCount range of oil-based smoke generators from Concept produces a smoke with a temperature resistance up to 200C, so realism...

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Smoke generator device for smoke detector testing

    Concept smoke systems are used throughout the world for testing smoke detectors of all types. And by smoke detector manufacturers in their own testing facilities. Concept also supply specialist equipment for testing smoke detectors in commercial aircraft, with users including Boeing, Meggitt, Alcoa, Apache, Dassault Falcon and IAI.

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Smoke generator device for oil mist generation

    Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and Kwangsan.

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Direct atomic absorption mercury determination in oil and oil products

    Introduction Determination of mercury in oil and petroleum hydrocarbon is currently a vital probl em due to the fact that the regulations for the mercury content in emission s from thermal power plants are becoming ever more stringent, and mercury poisons catalysts used in oil re fining.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Smoke generator devices for lev testing, spray booth clearance testing & air tracing

    For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of `clearance times` for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of...

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Smoke generator device for maritime shipboard fire training

    A fire at sea can be devastating. Ensuring that crews are trained in safe but highly realistic conditions can help them tackle a real fire with greater speed, efficiency and confidence - minimising the damage to the ship, its cargo and of course risk to life.

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you