Only show results in Connecticut? Ok

Vapor Intrusion equipment for Health and Safety

  • Premium

    HDPE Geomembrane - Model VI-20 - High-Performance Vapor Intrusion Barrier

    VI-20 is a 7-layer co-extruded EVOH geomembrane made using high quality virgin-grade polyethylene and barrier resins that provide unmatched impact trength as well as superior resistance to VOC vapor transmission. EVOH technology serves as a highly resilient underslab and vertical wall barrier designed to restrict methane, radon and other harmful ...

    By CETCO based in Wallasey, UNITED KINGDOM. from High-Performance Vapor Intrusion Barrier Product line

  • Premium

    ULTRASHIELD - Model G-800 - Non-Woven Geotextile Fabric

    ULTRASHIELD fabric consists of polypropylene, non-woven geotextile that is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. UltraShield provides protection for the membrane from rebar and other construction processes.

    By CETCO based in Wallasey, UNITED KINGDOM. from Non-Woven Geotextile Fabric Product line

  • Premium

    ULTRADRAIN - Model 6200 - Drainage Material

    ULTRADRAIN consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. ...

    By CETCO based in Wallasey, UNITED KINGDOM. from Drainage Material Product line

  • Premium

    LIQUID BOOT - Spray-Applied Gas Vapor Barrier

    LIQUID BOOT® is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® spray-application ...

    By CETCO based in Wallasey, UNITED KINGDOM. from Spray-Applied Gas Vapor Barrier Product line

  • Premium

    GEOVENT - Active/Passive Gas Venting System

    GEOVENT consists of a three-dimensional vent core that is wrapped in a non-woven, needle punched filter fabric. GEOVENT consists of a three-dimensional vent core that is wrapped in a non-woven, needlepunched filter fabric. GEOVENT End Outlets are available for use in conjunction with GEOVENT active/passive gas venting systems.

    By CETCO based in Wallasey, UNITED KINGDOM. from Active/Passive Gas Venting System Product line

  • Premium

    LIQUID BOOT - Trowel Grade

    LIQUID BOOT TROWEL GRADE is a trowel-applied, water-based membrane containing no VoCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT TROWEL GRADE is installed in conjunction with the LIQUID BOOT vapor intrusion barrier to minimize vapor migration.

    By CETCO based in Wallasey, UNITED KINGDOM. from Trowel Grade Product line

  • Premium

    LIQUID BOOT - Model 500 - Spray-Applied Gas Vapor Barrier

    LIQUID BOOT® 500 is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT 500 is economically formulated specifically for horizontal applications. LIQUID BOOT 500 spray application directly to penetrations, footings, grade beams, pile caps and other ...

    By CETCO based in Wallasey, UNITED KINGDOM. from Spray-Applied Gas Vapor Barrier Product line

  • Premium

    BASEFABRIC - Model T-60 - Non-Woven Geotextile Fabric

    BASEFABRIC fabric consists of polypropylene, non-woven geotextile that is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. BaseFabric provides a uniform substrate for spraying the Liquid Boot membrane.

    By CETCO based in Wallasey, UNITED KINGDOM. from Non-Woven Geotextile Fabric Product line

  • Premium

    LIQUID BOOT - Vapor Intrusion Barrier Systems

    High performance Vapor Intrusion Barrier Systems designed to meet your project requirements. LIQUID BOOT is a spray-applied, water-based membrane containing no volatile organic compounds (VOCs). With superior chemical resistance properties it seals all vapor intrusion pathways, preventing contaminated soil vapors from penetrating the slab. LIQUID ...

    By CETCO based in Wallasey, UNITED KINGDOM. from Vapor Intrusion Barrier Systems Product line

  • Premium

    AMS - Sub-Slab Gas Vapor Probe Kits

    Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Sub-Slab Gas Vapor Probe Kits Product line

  • SEC - Signature DIR Dual Gas Analyzer

    The SEC Signature DIR Dual Infrared Gas Analyzer is a self contained dual chamber optical gas analyzer designed for a non-intrusive continuous monitoring of process gases. This infrared optical gas detector is self-compensating for most aging environmental and contamination effects in which results in excellent measurement integrity. The SEC ...

    By Sensor Electronics Corporation based in Savage, MINNESOTA (USA). from Signature DIR Dual Gas Analyzer Product line

  • Pneumatic Focusing Gas Chromatography (PFGC)

    Pneumatic Focusing Gas Chromatography (PFGC) uses a novel sampling method that has been integrated into a gas chromatograph to allow ultra-sensitive detection of trace gas pollutants at the parts per trillion (ppt) level. PFGC has fully-automated sampling and requires little human intervention. PFGC is rugged, portable and can be configured to ...

    By VOC Technologies based in Damascus, OREGON (USA).

  • Geo-Seal - Vapor Intrusion Barrier

    Vapor Intrusion Barriers need to balance two key characteristics: chemical resistance or how well the barrier protects against the chemical of concern, and constructability, the ability to effectively seal all entry pathways in a building.

    By Land Science Technologies (LST) - a division of REGENESIS based in San Clemente, CALIFORNIA (USA).

  • MODULO - Aerated Foundation Block for Vapor Intrusion Control and Soil Contamination

    MODULO is a single-use formwork for the construction of ventilated crawl spaces which physically separate the building from the ground. The system creates an under slab void that works as a capillary barrier against moisture - yet uses less concrete than other standard slab equivalents but has, at the same time, a superior load bearing capacity. ...

  • Vapor Intrusion Testing Services

    Environmental Systems provides VAPOR INTRUSION TESTING services which may be required.

    By Environmental Systems based in Point Pleasant, NEW JERSEY (USA).

  • VaporTrac - Sensor-equipped Telemetry Devices

    VaporTrac is a sensor-equipped field device that remotely monitors Vapor Intrusion Mitigation (VIM) systems and triggers a notification when a system failure is detected. VaporTrac transmits airflow, pressure (vacuum), power, and device temperature measurements continuously via cellular or WiFi communication networks.

    By VaporTrac based in Agoura Hills, CALIFORNIA (USA).

  • CST - Custom Aluminum Dome Covers and Structures

    CST is the world’s leading designer and manufacturer of innovative clear-span aluminum domes for municipal water and wastewater storage, petrochemical terminals, bulk material storage facilities and architectural structures.

    By CST Industries Inc based in Kansas City, MISSOURI (USA). from Custom Aluminum Dome Covers and Structures Product line

  • Retro-Coat - Vapor Intrusion Technology

    Secondly, Retro-Coat is a recently introduced vapor intrusion technology from REGENESIS’ Land Science Technologies Division, whose widely used Geo-Seal composite vapor barrier system received the Environmental Business Journal (EBJ) Remediation Technology Award in 2008. Retro-Coat is a new chemical-resistant coating specifically engineered ...

    By Regenesis based in San Clemente, CALIFORNIA (USA). from Vapor Intrusion Technology Product line

  • Cupolex - Traditional Radon Protection Systems

    CUPOLEX Is More Effective And More Reliable Than Traditional Radon Systems. Traditional radon systems have been around for decades and haven’t changed much in that time. Electric fans need to run continuously to pull enough air through soil below a slab to maintain negative pressures. Because of the resistance of the soil below the slab to ...

    By Pontarolo Engineering Inc. based in Vaughan, ONTARIO (CANADA). from Traditional Radon Protection Systems Product line

  • Retro-Coat - Vapor Intrusion Coating

    Vapor intrusion can cause significant uncertainty for building owners. Retro-Coat provides a simple and proven solution to a complex problem. Applying Retro-Coat can provide a building owner with long-term assurance that the vapor intrusion risk has been successfully mitigated, while at the same time, reducing the overall mitigation cost and ...

    By Land Science Technologies (LST) - a division of REGENESIS based in San Clemente, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you