Only show results available in Virginia? Ok

Vibration Control Applications

  • Crusher for Marble Industries

    DSMAC as crushing equipment manufacturer in China, not only to provide a cheap and efficient marble crusher can design marble crushing process.

    By DSMAC Group based in Zhengzhou, CHINA.

  • Noise and vibration monitoring for nuclear power industry

    The nuclear industry must increase the availability and reliability of its power stations whilst ensuring that a high level of safety is maintained. The principal weak points in achieving this objective are the industry`s systems and components.

    By ACOEM based in Limonest, FRANCE.

  • Noise monitoring for industrial plant monitoring

    Industrial sites are subject to regulations that limit sound and vibration levels at their perimeter and with regard to third parties. The taking of measurements at intervals remains one of the most frequently used methods of evaluating the noise and vibration levels of such sites.

    By ACOEM based in Limonest, FRANCE.

  • Wind Farm Noise Assessment by XL2

    One of the largest acoustic consulting firms in Australia was engaged by the New South Wales Department of Planning & Industry to conduct wind farm noise assessments. The goal was to perform a specialist, independent acoustic compliance audit of three major wind farms located near Canberra, Australia’s capital city. The objective of the study was to conduct a detailed noise assessment at residential dwellings near to the wind farms. Three wind farms near Canberra, Australia, were investigated. XL2 Sound Level Meters were operated on a continuous basis, typically over a six week period at each wind farm. The XL2 was battery powered to enable continuous noise logging for two weeks at a time at each residential site. The recorded data was then processed in accordance with the relevant standards specified in the conditions of consent for wind farms.

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Premium

    Noise monitoring solutions for electroacoustics

    Manufacturers of electroacoustic equipment such as loudspeakers, microphones, telephones, headsets, hearing aids, hydrophones, etc., have, for many years, successfully developed new innovative acoustical designs and introduced these into the market in the form of high-quality products.

  • Premium

    Sound Instrumentation for Industrial Hygiene

    Industrial hygiene is separated into two main applications - Noise at Work and Human Vibration. Norsonic has during the past year expanded the product portfolio to cover both applications. By close cooperation with our customers and health and safety research institutes we have designed a carefully balanced selection of measuring tools and application software that covers both the vibration and noise domain.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound Instrumentation for Environmental Noise Monitoring

    State of the art noise monitoring systems; Modern noise monitoring systems offer a wide range of advanced features and come with software that can analyze and structure long term measurements data efficiently.  A complete noise monitoring system consists of one or more noise monitoring terminals, a noise server and work stations for presentation, post processing and reporting.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Industrial solutions for structural health monitoring

    Real time monitoring of structures is an excellent field of application for wireless sensor networks. ADVANTICSYS has provided solutions for the monitoring of structure in different fields, from bridges, where the vibration has to be controlled both in the construction and operation phase, to cultural heritage buildings with their structural integrity under risk.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipment for industrial paper & wood shredding

    Our industrial paper shredders are designed to process paper, cardboard, and pulp waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper products. In addition, industrial paper shredders are used to ensure secure and total destruction of documents.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).


    Typical applications: With a single TROMINO®: - H/V (subsoil resonances) - SASW, MASW, small scale refraction seismics - Vibration monitoring (e.g. UNI 9916, DIN 4150) - Passive modal analysis of structures (mode frequencies, mode shapes) With more than one TROMINO®: - SASW, MASW, refraction seismics - ReMiTM, ESAC, SPAC, other passive and active spatial correlation methods - Vibration monitoring (e.g. UNI 9916, DIN 4150) - Full modal analysis of structures (both passive and active)

    By MoHo - Science & Technology based in Marghera - Venezia , ITALY.

  • Knockers, Vibrators and Rappers for Dust Collectors

    The Cleveland Vibrator Company offers a wide range of pneumatic, piston-driven, industrial vibrators, knockers, impactors and rappers to dislodge collected dust from precipitator wires and plates or baghouse filter bags as well as keep dust free flowing in collection bins and hoppers.

    By Cleveland Vibrator Company based in Cleveland, OHIO (USA).

  • Noise and vibration monitoring for race circuit monitoring

    Certain leisure activities, and motor sports in particular, are a source of elevated noise levels. They cause significant disturbance for nearby residents, particularly as such sites are being developed in increasingly densely populated urban areas.

    By ACOEM based in Limonest, FRANCE.

  • Premium

    Noise monitoring solutions for structural dynamics

    Everything needed to analyse the dynamic behavior and properties of structures, from a supplier of renowned quality. Brüel & Kjær is a ‘one-stop shop’ that offers a comprehensive range of application software, front-end hardware, modal excitation systems, impact hammers, transducers and accessories. At the core of a Brüel & Kjær system is the PULSE analyzer platform, which provides powerful applications and highly flexible hardware configurations.

  • Premium

    Sound Instrumentation for Vibration

    Vibration is simply defined as the variation of an object about a fixed position. To properly define and quantify the physical characteristics of vibration, however, is much more complex - account must be taken of the direction, frequency and magnitude of vibration. Then, what properties should be measured? Is it appropriate to measure the displacement of the vibrating object as a measure of its amplitude, or should we instead measure velocity, or acceleration? What are the conventions for measuring direction, and is it really important?

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Noise monitoring solutions for environmental noise and vibration

    Environmental noise is unwanted sound and vibration coming from a plethora of sources, among them industrial plants, road and rail traffic, construction work, and aircraft. Add to these sports events, shooting ranges, leisure parks, etc, and you have noise from many different sources, each with different characteristics and posing specific problems for the professionals who have to assess them. The way the problems are dealt with differs immensely from country to country and is very much dependent on culture, economy and politics. We offer solutions to cover all demands from level checks to in-depth analysis, from measurement or prediction, to post-processing and reporting.

  • Noise and vibration monitoring for the construction site

    By implementing a noise and vibration monitoring system, the impact of construction site activities can be managed by: Complying with legal requirements relating to public health sanctioning the absence of appropriate precautions to limit abnormally high levels of noise and vibrations. Taking environmental quality considerations into account (HQE approach). Limiting noise and vibration pollution with the comfort of neighbouring residents in mind. Enabling companies in the public works and construction industry to adopt a transparent approach to communication with local residents, in order to avoid resistance and instead gain their support for a given project. Providing the site manager with reliable and official data, should it be required. 01dB offers solutions for construction professionals to suit the requirements of each building site. It provides them with metrological systems (such as the certified DUO sound level meter, dB4 and MR2002) with 01dB WebMonitoring services to ensure optimal control of noise & vibration impact of the construction work, using as well communication tools intended for the general public.

    By ACOEM based in Limonest, FRANCE.

  • Noise and vibration pollution control for paper industry

    The paper industry depends upon a continuous industrial process in which the paper machine is the central factor. This system is based on several variable speed rollers mounted on roller-bearing blocks, and damage to a single block can be enough to shut down production for several hours.

    By ACOEM based in Limonest, FRANCE.

  • Permeable Plastic Paving For Resin Bound Stone

    Resin bound stone is a new and effective way of providing a highly aesthetic surface for your home, business premises or other external or for that matter, internal surface area that is both very robust and load bearing, but also fully permeable or porous. That means that any water or rainwater that hits the surface will freely drain through the resin bound topping and through the Ecogrid base system to naturally dissipate in to the water table.

    By Ecogrid Ltd based in Wallasey, UNITED KINGDOM.

  • Noise and vibration monitoring for oil and gas industry

    The oil and gas industry requires major infrastructure in terms of refineries and offshore extraction platforms which operate continuously. A large number of essential rotating machines, structures and piping networks are subjected to high levels of demand in a difficult environment, leading to the potential for breakage.

    By ACOEM based in Limonest, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you