"Good acoustics" is usually the target in room acoustics. The meaning of this depends on the type of room and the intended use. Rooms for musical presentations need a good sound quality at as many seats as possible while lecture halls demand good intelligibility of the teaching person. In case of open-space offices a productive working environment should be ensured. This can mean a focused individual work or a good communication between workers within the same team. CadnaR offers the tools to efficiently handle...
We are proud to develop the most powerful software for the calculation, assessment and presentation of outdoor noise. Our software solutions for the calculation and assessment, prediction and presentation of environmental noise exposure are powerful, yet easy to use. Whether your objective is to study the noise immission of an industrial plant, of a commercial center including a parking lot, of a new road or railway scheme or even of entire towns and urbanized areas: CadnaA is designed to handle all these tasks.
Noise control in industrial halls is essential to ensure a non-harmful environment for the workers and limit the immissions caused at the neighbouring buildings. Check out how CadnaR enables you to model and calibrate your machines, calculate and evaluate noise at the workplaces and assess measures to acoustically improve any situation at hand.
Demolition gives a mental strong image, the act of destroying something is so powerful and it is certainly not for the faint of heart.
But there is another side to it, hidden away, and it is all the planning and organizing behind the scene. It is the sta
The noise from vehicles such as cars, buses and trucks is wide spread with many people being affected by these noise sources in their daily lives. All modern vehicles will be designed to meet strict safety and emissions standards as well as noise output levels. All vehicles sold in the EU must comply with a range of noise directives to ensure that they meet these specified noise levels when they are sold and many countries enforce regular checks over the life of the vehicle. Motor Sport noise is a often a source...
SenZ2 provides a complete solution to optimise the waste collection process. Highly accurate insights are given on container fill-levels with the unique LEVELRADAR™. This reliable source of information, together with the route optimisation application will result in direct operational cost savings. Beside, complaints about full containers can be avoided effectively. Through a significant reduction in emissions, road wear, vehicle wear, noise pollution and work hours, SenZ2 provides cities as well as commercia...
The Data Explorer PC software for the XL2 Sound Level Meter now includes a series of professional tools for detailed analysis of low-frequency noise (LFN). The graphical representation of time varying frequency components offers an efficient process for identifying the presence and level of LFN. Also the associated high quality audio recording supports further correlation with the objective measurement data.
The new features are particularly useful in the calculation of immission levels which is defined as the...
Completing a Noise Risk Assessment can seem like a big task at first. That`s why our Noise Experts have provided advice based on their years of experience. Find answers to common problems such as "Do I have a noise problem?" and "What do the Regulations require me to do?" We`ve also recommended a range a products to help get you started with workplace noise monitoring.
Construction can be a industry where high noise levels are common and where both occupational and environmental noise monitoring may be needed. The measurement and monitoring of noise from construction sites can be carried out using a range of different instruments depending upon the time over which the measurements need to be made.
In a process unique to the mining industry, mineral ore must be extracted and conveyed to a means of transportation in a challenging environment. This involves the use of high-power fixed and mobile equipment with complex kinematics. The entire process is carried out in cyclic and variable operating conditions with significant safety and accessibility constraints. Mining operations are also a source of noise and vibration pollution both for site workers and people in the surrounding area.
For environmental noise monitoring when short measurements are required using a hand held Sound Level Meter. This could be for boundary monitoring of industrial sites or noise surveys for planning purposes.
What is the difference between sound and noise? Clearly more than the loudness only. Although an aircraft is very noisy, a mosquito at night-time can be more than enough to spoil a good night`s sleep. Instead of looking at the loudness only as a criterion for the degree of noisiness, we shall simply regard noise as what it is - viz. unwanted sound.
noise3D enables commercial and industrial users to assess noise levels with the latest available propagation programs, without having to purchase expensive software. Instead, the 3D modeling software Trimble Navigation SketchUp or Google Earth (Pro) are used as interface. You can use your own planning documents, such as scanned maps for digitization, or transfer data from Google Earth for a simpler option.
The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis.
The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determine...
The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories:
(1) Noise at Work (potential for noise-induced hearing loss due to long term exposure to noisy activities)
(2) Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site...
How to control classroom noise in schools, colleges and universities; Access to education is one of the most important opportunities in our lives, however, there is increasing evidence that excessive noise levels can create a negative learning environment
The nuclear industry must increase the availability and reliability of its power stations whilst ensuring that a high level of safety is maintained. The principal weak points in achieving this objective are the industry`s systems and components.
For Industrial Noise Monitoring applications, Cirrus Environmental can supply a range portable, semi-permanent or permanent noise monitors as well as the MK:427 NoiseSensor for integration into existing data logging systems.