Only show results in Virginia? Ok

Workplace Safety Applications

  • Soldering Fume Extraction

    Soldering fumes are Unbreathable. Soldering enables the joining of metal parts by melting a filler metal to attach wires and other metallic components. The fumes generated from melting solder especially solder containing Lead or Tin present are dangerous and require local ventilation to remove harmful smoke from the work area. Soldering application need to be properly ventilated to prevent toxic fumes from reaching the worker`s breathing zone. There are a number of different industries such as the electronics assembly industry and electronics repair comapnies who must deal with the hazards of solder smoke. Fumes created by automated PCB soldering including wave soldering machines, handheld soldering irons, torch brazing and furnance brazing are often ignored because of the small volume of smoke generated. However, these applications still require careful consideration as dangerous fumes can impair employee’s respiratory tracts depending on the filler metals used. Because manual soldering applications require working with tiny components, workers end up positioning their heads right above toxic rosin or lead solder fumes with a direct exposure into their throat, nasal passages and lungs, and as a result, they can experience respiratory complications. Rosin irritation can cause various side effects and the inhalation of lead fumes is carcinogenic. As lead oxide smoke collects in your lungs, it can be transferred into your bloodstream. Diversitech recommends installing soldering fume extraction equipment to prevent the inhalation of dangerous fumes. These ventilation units will not only protect each person working at a soldering station when installed and positioned correctly, but they will also prevent fumes from contaminating other worker’s lungs.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • LGS™ Valve Range -

    LGS™ (liquid,gas & steam) Valves are suitable for a wide range of applications. We offer a 'same day despatch' service to ensure your safety is guaranteed and that all systems are back in full operation within the quickest time-frame.

    By Seetru Limited based in Bristol, UNITED KINGDOM.

  • Smoke generator device for hot fire training

    Concept`s ViCount smoke generators are installed throughout the world in quality hot fire training centres - providing the most realistic artificial smoke effect possible. They are also used to add smoke during carbonaceous burns. The majority of fire training centres and schools use gas to replicate the appearance and heat of a real fire but one thing gas doesn`t produce is smoke! The ViCount range of oil-based smoke generators from Concept produces a smoke with a temperature resistance up to 200C, so realism can be added to Hot Fire simulators effectively and safely.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Indoor air sampling for industrial hygiene

    We supply air sampling pumps and calibrators for industrial hygiene, indoor air quality, occupational health, environmental, health physics and safety disciplines.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA).

  • Trapped Key Interlocks for Ports

    Interlocks can be used in many process or procedural systems within Ports involving the transmission of electricity, including crane movement, Ship to Shore power, and local substations or backup generators. KIRK type DM locks with chain that are attached to medium voltage connectors located in quayside vaults ensure proper procedure is followed when connecting shore to ship power. These MV connectors feed the ships with crucial electricity, enabling diesel on-ship generators to be switched off whilst in dock, also known as cold ironing. The upstream breakers feeding the vaults are equipped with KIRK® type F locks, which are keyed to correspond to the interlocks on the vault cover or connectors. This ensures power is disconnected before the connectors can be engaged or disengaged, prohibiting operations under load.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Oil Mist and VOC Collection

    Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory system Bronchitis Bronchial asthma Chronic cough Slip hazards (falling, dropping of tools/materials)? How can you protect yourself?? Mist collectors are effective at capturing and filtering harmful oil mist pollution. They can either be installed on individual machines or to a central location. Having the correct oil mist filtration equipment installed will protect your employees from unnecessary health risks. In addition to this, it will also help to protect your business from long term liability and healthcare costs related to workplace air contamination.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Meteo Information for Safe Operation

    In the industry segment meteo information is essential for safe operation. To deal with emergencies, accurate real-time information on wind conditions (direction and speed) is crucial. In some cases we feed this data directly into safety applications which models and predicts the progression of released gas clouds.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Smoke generator device for fire training, emergency evacuation & BA training

    The Fire Training Range, designed and manufactured by Concept, has been developed to add realism to training scenarios or any type of fire safety training. For complete portability, unbeatable reliability and quality smoke output, the Colt 4 Turbo is in a class of it`s own. For large scale applications the ViCount is the ultimate choice for fire training. With almost 50 years experience in the generation of artificial smoke for fire brigades, Concept are in an unrivaled position to supply the equipment and advice best suited for your application!

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Sound level measurement for safety regulations

    Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

    By Casella based in Kempston, UNITED KINGDOM.

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically influenced corrosion (MIC).

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Measurement solution for hospital workplace exposure monitoring

    In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Electrical Based Tomography Systems for Multiphase Flow

    Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other sectors.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Premium

    NO2 analyzer - For Medical Application

    The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. For more information on how this unique analyzer, contact Environnement S.A.

    By Environnement S.A based in Poissy, FRANCE.

  • Premium

    Noise monitoring solutions for sound power

    Noise emission values are increasingly becoming marketable items for machines, equipment and appliances - low noise emissions directly relate to lower noise exposure for product users and bystanders. Retail customers, both private and corporate, appreciate this relationship and are, therefore, more aware of noise emission declarations on goods when deciding their purchases.

  • HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have shown that TDLAS equipment provides data that is more accurate than conventional gas monitoring equipment. When calibrated for HCl monitoring, TDLAS is able to detect this gas among other gases present in the area and provide continuous updates with regards to the changes in its concentration.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you