Air Sampling services for Monitoring and Testing

Proper operation of Dekati Gravimetric Impactors can be ensured by following the maintenance and service instructions given in the user manuals of the instruments. If further verification of the instrument operation is needed, we can provide maintenance and calibration services for the Dekati® Impactors. All Dekati® Impactor calibration ...

By Dekati Ltd. based in Kangasala, FINLAND.

ENVEA UK offer industry leading expertise to customers and partners through a comprehensive range of technical services, training packages and a 'knowledge transfer' approach. The aim is to advise and support customers and partners in meeting the specific particulate monitoring challenges they face, from initial consultation and product selection ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - Technical Services Service line

Complete setups for emission measurements; Aerosol dilution and sample conditioning is an essential part of any particle measurement system. Most aerosol particle measurement instruments cannot measure reliably when sample conditions differ from ambient nor when particle concentration is high. A well-designed dilution system not only to reduces ...

By Dekati Ltd. based in Kangasala, FINLAND.

Alarm Setting Services are for plant operators using Dust Gross Filter Failure Detectors. To ensure these instruments deliver maximum benefit, it is important that the alarms are configured to the optimum level for the process-specific conditions. ENVEA UK offer two categories of Alarm Setting Service for Dust Gross Filter Failure Detectors: Alarm ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

Complete setups for engine emission measurements; Aerosol dilution and sample conditioning is an essential part of any particle measurement system. Most aerosol particle measurement instruments cannot measure reliably when sample conditions differ from ambient nor when particle concentration is high. A well-designed dilution system not only to ...

By Dekati Ltd. based in Kangasala, FINLAND.

Monitoring Particulates and Microbials  in Compressed Gases. Compressed gases can be viewed as critical utilities in many industries when either in direct product contact or directly entered into the clean room environment. This includes viable and non-viable monitoring for the Pharmaceutical industry and sensitivity to 10 nm in inert gases ...

By Particle Measuring Systems based in Boulder, COLORADO (USA).

Configuration Services are designed for operators requiring reliable and representative trending data from their dust monitors, without the need for calibrated, quantitative measurement. PCME's Service Engineers have extensive experience configuring dust monitors to maximise filter performance and process benefits. Customers using Dust Gross ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

REMOSA is above all a customer-centric business, offering quality, innovation and excellent service. Remosa has a high number of professionals who are dedicated to their customers at all times. It has a broad commercial network with coverage across the Peninsula and France, supervised by a team of engineers who at the same time give support and ...

By Remosa - Recubrimientos y Moldeados s.a. based in Súria, SPAIN.

ENVEA UK has extensive experience assisting operators to meet their compliance monitoring requirements, where understanding that calibration is not simply an isokinetic test is the key to success. Two categories of service are offered for the calibration of Particulate Measurement Systems: Annual Calibration Assist (which does not include ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

A full range of Setup Packages are offered to customers, bringing extensive experience from a wide variety of installation and commissioning projects and a thorough knowledge of the issues which can arise. Whether your ENVEA UK particulate monitoring system is to ensure legislative compliance or provide filter performance monitoring and process ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

Status review and adjustment of cleaning cycle. Verification of electromechanical systems and elements. Checking for absence of leaks. Review of sludge level. Adjustment of sludge return pumping. Taking of affluent and effluent samples. Analysis in certified lab. Emptying of sludge.

By Remosa - Recubrimientos y Moldeados s.a. based in Súria, SPAIN.

UKAS Air Sampler Flow CalibrationInvolved with air sampling regulatory or compliance measurements to OSHA, NIOSH, ASTM, ARCA, CAR 2012 or HSG 248 standards then you should be gaining UKAS accredited calibrations for your master air flow sampling system. Regular UKAS accredited calibration of your air sampler system whether this be a flowmeter, ...

By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

Cooper Environmental prides itself in accepting clients’ unique technical challenges and providing them with results through our innovated technical solutions. Today, 50% of our recent method development projects employ X-ray Fluorescence (XRF) for trace metals analysis; however, we are actively developing non-XRF methods, such as ...

By Cooper Environmental Services based in Beaverton, OREGON (USA).

The environmental monitoring service aims to manage issues related to odor emissions caused by industries and other realities on the territory. If there are disputes raised up by citizens, it is essential to determine the origin and responsibilities of odors objectively; moreover it is desirable to monitor air quality 24 hours a day, in ...

By PCA Technologies SRL based in Pogliano Milanese, ITALY.

Air flow and gas flow meter calibration services for the automotive, aviation, medical, environmental, pharmaceutical and process instrumentation industries. The temperature controlled laboratory is UKAS accredited (Lab 0604) for air flow calibration on both volume flow and mass flow and for both rate and quantity passed measurement. Flow passed ...

By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

In addition to supplying consumables and accessories for sampler use, Airmetrics offers a 47mm Filter Weighing Service to complement use of the MiniVol TAS and other types of air sampling equipment. We carry three types of filters (Fiber Film, Pure Quartz, and Pure Teflon; others may be special ordered).

By Airmetrics based in Springfield, OREGON (USA).

The Mold Samplers will hunt down visible and invisible mold in your house or building and perform bulk sampling to determine if there is a problem.

By All Phase Environmental, Inc. based in Huntington Beach, CALIFORNIA (USA).

Lead abatement contractors violating construction standards and regulations can expose you and your company to civil and criminal liabilities. The fiscal risks include: penalties and fines from regulatory agencies, lawsuits from building workers or tenants and damages to your real property. When All Phase Environmental performs construction ...

By All Phase Environmental, Inc. based in Huntington Beach, CALIFORNIA (USA).

AUGER / MUD ROTARY DRILLING Diedrich auger drilling rigs are equipped with all the latest available features for safety, convenience and production drilling. The multiple drilling capabilites include: Hollow Stem Auger, Air Rotary, Mud Rotary, Rock Coring, Casing Advance & Continuous Soil Sampling.

By Groundwater Protection, Inc., (GPI) - a division of Drillpro, LLC based in Orlando, FLORIDA (USA).

Since 1982, ASE has removed over 600 underground storage tanks for over 500 clients. ASE combines civil engineering, geological, hydrogeological and chemical expertise towards UST removal projects. ASE provides a full range of tank services: installation and sampling of groundwater and vapor monitoring wells; soil sampling and analysis; ...

By Aqua Science Engineers, Inc. based in Irvine, CALIFORNIA (USA).