Monitoring & Testing Applications
-
Premium
Continuous Monitoring Simplifies Drinking Water Nitrate Management
Problem: Nitrate, the most stable form of nitrogen in water, is found in both ground and surface water and originates from both natural and anthropogenic sources. Due to its high solubility in water, nitrate is not filtered out from groundwater like other contaminants. Removing nitrates from source water is important as elevated levels in drinking water can cause serious health effects when ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Reverse Osmosis Water Testing
Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process ...
By Myron L® Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Decentralized Wastewater Treatment for Worker Encampments
With Aspiralâ„¢ Smart Packaged plants, installations can meet even the strictest effluent regulations and foster good relations with neighboring communities The oil and natural gas extraction industry is booming, and where there's a boom, there's a workforce that needs shelter. Typically, impromptu housing springs up to meet the need, but often, these so-called "man camps" overstress the sanitary infrastructure of nearby towns or go without wastewater treatment entirely, endangering human health and the environment. ...
By Fluence Corporation based in White Plains, NEW YORK (USA).
-
Premium
Gas Analyzers for Iron Steel Plant
Monitoring atmosphere gases and flue gases in steel mills and other heavy ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Corrosion-resistant materials for the chemical & petrochemical processing industry
Sauereisen’s diverse line of corrosion-resistant materials stands up to the extreme temperatures, pH levels and physical abuse that are commonly found in chemical and petrochemical facilities. Whether these facilities need protection for secondary containment, flooring, immersion or flue gas environments, Sauereisen has an inclusive product offering to provide the necessary protection and security. Our products have stood up to the challenges in acid plants, refineries, steel pickling lines and precious ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Water treatment chemicals solutions for pulp and paper industry
In the manufacturing of pulp, the raw material for paper, problems such as the piercing and ripping of paper occur due to calcium carbonate and other scales and pitch deposits (adhesives contained in wood and old paper). To prevent these problems, Kurita Water Industries offers a range of water treatment chemicals such as anti-scale agents and pitch control agents. For the paper-forming process that produces paper from pulp, we offer water treatment chemicals such as slime control agents that help improve the ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Gas flow management solutions for gas chromatography calibration sector
Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the required flow rates for single or multi-point calibration. In all cases, Environics mixers allow you to use less expensive single-gas cylinders or bulk tanks in place of ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Product Recovery Solutions for Milling and Drying Processes
Efficient recovery of active pharmaceutical ingredients (APIs), chemical substances and food powders after drying applications such as spray and fluid bed drying is frequently a problem. The same problem occurs in many milling and micronization ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Extraction of many emission sources in extensive factory premises
Example: Packaging. Similar tasks: Coating, Automobile industry, paint production.Different production processes lead to decentralised ventilation of emission sources. These decentralised ventilations are consolidated within a central air pollution control ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Premium
Application package FLUXANA Raw Materials for Cement, Glass and Steel Industry
This application package is a 'ready to go' calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like minerals or raw materials. It performs with the highest precision possible in xrf sample preparation. ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Continuous emissions monitoring solutions for mineral wool production
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Water quality monitoring for textile industry
Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Respirometry solutions for toxicity testing sector
Waste Type: Complex alcohols. Objective: Certain constituents of the test waste were know to be biodegradable but were suspected of being toxic to aerobic biological processes when present in high concentrations. The objective was then to determine how much waste could be added to an activated sludge process before toxic impacts would be ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Premium Gas Generators and Calibration Solutions for Industry, Emissions and Process Sector
The specialists words are “measuring is good but measuring right is better”. At the moment the thought of an homologation happen for a new or existing engine development, the precision of gas measures is a crucial point. CO2 taxes and regulations oblige power plants and incinarators owners to regulary measure and calibrate the emissions of their installations. In order to fulfill the various normalisations, the Sonimix gas mixers are the essential tools. They provide the precision, reliability and ...
By LNI Swissgas based in Versoix, SWITZERLAND.
-
Premium
Flame Photometer for Measurement of Calcium in Biological Samples
A number of methods have been reported for the measurement of calcium in biological materials by flame photometry or titration. This method employs trichloroacetic acid (TCA) to precipitate the proteins and has been found to be adequate to extract all of the calcium from tissue samples. Sodium, potassium and phosphate caused no significant interference and calcium concentration in the range of 0 to 2 µg/ml is readily determined. ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
NO2 analyzer - For Medical Application
The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. For more information on how this unique analyzer, contact Environnement ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Ultrasonic sensors for tank level measurement applications
Ultrasonic sensors mount at the top of the tank facing down toward the liquid surface. By measuring the distance to the liquid, and knowing the tank height and geometry, the level or volume is calculated. Tanks can have a nitrogen blanket or be open top. The sensors typically thread into a tank fitting, and can connect to other equipment by analog or serial data means. They can also identify full, empty or reorder levels. A wireless connection can also be provided to access local tank data without installing ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Air pollution control for the food & beverage processing industry
The Food and Beverage industries are rapidly evolving and highly regulated. Partner with Anguil’s vast industry experience and breadth of solutions to solve your toughest air and water pollution ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Laboratory and Scientific Instruments for Material Analysis
By Shanghai Metash Instruments Co.,Ltd. based in Songjiang District, CHINA.
-
Premium
Gas monitoring instruments and systems for anesthetic gases
The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane, ...
By Gasmet Technologies Oy based in Vantaa, FINLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you