ASTM Methods Videos

  • The Value of Standards-Video

    ASTM President James A. Thomas and ASTM members speak on the value of ASTM standards across various ...


    By ASTM International

  • ASTM D665 Auto Rust Bath Video

    A short video from Lawler Manufacturing, a petroleum lab equipment manufacturer, explaining the ASTM D665 Rust Method and how their Automated Rust Bath can reduce operator ...

  • Research (RON) and Motor (MON) Test Method Conversion on Octane Engines FTC-M1/M2

    Combination RON & MON Octane Rating Unit SINPAR FTC-M1/M2 provides the capability to switch between Research Method (RON ASTM D2699) and Motor Method (MON ASTM D2700) tests with minor equipment adjustments. Research/ Motor Method Conversion is easily accomplished on Octane engines FTC-M by the use of Dual-Speed motor to allow adjustment of engine speed to meet both Research (600 RPM) and ...

  • Model PE-1000 Mercury Analyzer - Video

    PE-1000 Mercury Analyzer for Liquid and Gaseous Hydrocarbons - Complies with UOP Method 938-10 and ASTM ...

  • Precast Concrete Box Culvert: Design & Installation Video

    Since 1968, Jensen Precast has been a leader in manufacturing precast concrete products. With production plants in Nevada, California, Arizona, and Hawaii, Jensen Precast is one of the largest independently-owned, American precast concrete companies in the United States. All of our Box Culvert structures are designed by a staff of Professional Civil & Structural Engineers certified by the ...


    By Jensen Precast

  • "SO-Sieve": Sieve analysis, Hydrometer & Atterberg limits tests

    “SO-Sieve” having a user-friendly interface, includes sieve analysis, hydrometer and Atterberg limits tests. It also presents soil type based on USCS (Unified Soil Classification System). Hydrometer test can be calculated using both ASTM D7928 & ASTM D422 standards. Note that sieve analysis and hydrometer tests could randomly be generated based on user-defined criteria. Lots of smart ...


    By Soil Office

  • Comparison of PRS-Neoweb with HDPE Geocell Material - Video

    Geocells are commonly manufactured from HDPE due to its low cost and good chemical resistance. However, PE has low stiffness, low strength, high creep, and high coefficient of thermal expansion. PE stiffness can degrade over time by 75% (particularly under elevated temperatures) rendering HDPE geocells unsuitable for long-term use. Neoloy polymeric alloys from PRS on the other hand, maintain ...


    By PRS Geo-Technologies

  • Phase I Environmental Site Assessments - PM Environmental - Video

    Learn more about PM Environmental's Phase I Environmental Site Assessment services by visiting our service page here. (link to http://www.pmenv.com/services/phase-i-environmental-site-assessments). PM Environmental's Phase I Environmental Site Assessment services include an executive summary, clear scope of work, and provision of supporting documentation and sources. They also include an on-site ...


    By PM Environmental

  • ASTM D665 Auto Rust Bath Lawler Lawler Video

    A short video from Lawler Manufacturing, a petroleum lab equipment manufacturer, explaining the ASTM D665 Rust Method and how their Automated Rust Bath can reduce operator ...

  • NIC RA-4500 - Video

    Nippon Instruments Model RA-4500 Mercury Analyzer offers fully automated sample preparation (digestion) and analysis by standard EPA/ASTM Methods without any user ...

  • Magnetic Particle Inspection-Video

    Magnetic particle inspection is a very sensitive nondestructive test method used to identify defects on the surface of ferromagnetic materials such as forgings, castings, weldments and machined or stamped parts. Magnetic particle inspection or MPI is also called magnetic particle testing (MP) or magnaflux testing. Laboratory Testing Inc. performs both visible dry and wet fluorescent magnetic ...

  • Premium

    InfraCal Soot Meter - Video

    ASTM Approved Test Method D7686-2011 for on-site measurement of soot levels in diesel lube oils in under 30 seconds.  A few simple steps provides direct readout of soot level up to 15% without sample preparation or ...


    By Spectro Scientific

  • ERASPEC OIL - Portable FTIR analysis in seconds

    With ERASPEC OIL you can perform direct trending as well as spectral substraction analysis of your lubricating oils in seconds. All measurements are performed according to thr latest ASTM and JOAP ...


    By eralytics GmbH

  • Blue Diamond Coating / A106 Pressure Pipe - MST Seamless Tube & Pipe Video

    MST sets the standard for high quality seamless pipe products and exceptionally quick turnaround. Now, when you need superior protection, A106 pressure pipe is available with the exclusive Blue Diamond® coating. Only at MST can you get this world-renowned UV coating that meets ASTM/ASME A/SA 106 requirements and offers superior surface ...

  • Close Quarter Pex Tool Video

    Close Quarters Manual PEX Crimp Tools are the newest addition to the RIDGID® Crimp Tool line. With handle openings up to 71% smaller than our standard PEX Crimp Tools, contractors can now maneuver into tight spaces with ease. And, you'll always be prepared with a built-in Go/No-Go Gauge -- a RIDGID exclusive. ...


    By Ridge Tool Company

  • AD systems - Smoke_Point_wick_insertion [XVID 720p] Video

    ASTM D1322 - An alternative method of preparing a wick free of twists and frayed ends utilizes a wick-trimmer ...


    By AD Systems

  • CAV 4.2 Sales Video

    The CANNON® CAV® 4.2 is a fully automated, dual-bath, benchtop viscometer with two 14-position sample handlers for unattended ASTM D445 processing. Each of the two Ubbelohde-style tubes (one per bath) covers a 100-fold viscosity range between 0.5 mm²/s (cSt) and 10,000 mm²/s (cSt) from 15 °C to 150 °C (with available options). Meets test methods ASTM D445/D446, ISO 3104/3105 and IP 71. For more ...

  • Dredge Ball Joint

    DREDGE YARD ball joints are designed by using the latest CAD technologies, production methods and testing facilities World wide. To provide customer with the best suitable solution and lowest cost , DREDGE YARD ball joints are designed in six different types, giving variations of tilting angle from 15 to 18 degrees and duties from 10 bar to 30 bar. All dredge ball joints are designed, ...


    By Dredge Yard

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you