As a by-product of the treatment of water with chlorine dioxide and in potable water generation, chlorite is subject to monitoring requirements in many countries. Our product line of DULCOTEST chlorite sensors provides two types of sensor for different measuring ranges. In the treatment of potable water previously treated with chlorine dioxide, the chlorite level must be monitored before the ...
The photometers DT1B, DT3B and DT4B are used, among other things, as a reference method for calibrating the electrochemical sensors for chlorine, chlorine dioxide, chlorite, H2O2, bromine and ozone. They have been adapted to today's requirements and can be used in almost all areas of water analysis. High-quality interference filters and long-term stable LEDs are used as the light source in the ...
Temperature measurement can take place separately or as a correction variable for other measured parameters. Temperature measurement is used universally, either to directly measure the temperature or for temperature compensation when measuring the following parameters: pH, Fluoride, Conductivity, Chlorine dioxide, Hydrogen ...
The HydroACT Reagentless Chlorine Dioxide Analyzer is one of our online disinfection monitoring solutions. Just like with the other HydroACT series products, our Chlorine Dioxide (ClO2) sensor is simple to install, and extremely reliable. The membrane covered probe is exceptionally stable for chlorine dioxide measurement, and requires no zero calibration. The vented flow cell allows for ideal ...
Measuring ranges 0 – 100 °C. Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen ...
The Cal 2000 provides unmatched versatility and accuracy in corrosive calibration gases. Field replaceable electro-chemical generating cells provide a calibration standard for accurately testing chlorine, chlorine dioxide, hydrogen, hydrogen cyanide, and hydrogen sulfide gas ...
Based on the industry-standard ALTAIR Single-Gas Detector—but with added features and functionality—ALTAIR Pro toxic gas and oxygen detectors combine reliable detection and LED/audible/flashing/vibrating alarms with clear, backlit LCD displays. Electrochemical sensors measure concentrations of toxic gas (chlorine dioxide, hydrogen cyanide and phosphine) or percent oxygen. ...
The Cal 2000 provides unmatched versatility and accuracy in calibration gases. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine, Chlorine Dioxide, Hydrogen, Hydrogen Cyanide, and Hydrogen Sulfide gas detectors with a single ...
Advanced Model EP500 is an essential HACCP tool for wash water automation and control that allows multi-function monitoring, pump control, proportional output and recording of any oxidizer sanitizer. Measure Free Chlorine (ppm), ORP, pH (ISFET), Non-Glass, Conductivity of Dissolved Solids (CDS) and Temperature with a choice of measuring Chlorine dioxide (ppm) or Dissolved Ozone (ppm). Modular ...
The DioSense range of Chlorine Dioxide Analyzers, and Chlorine Dioxide Monitors utilise the very latest and best chlorine dioxide sensor available in the world today. It is a membraned device which is insensitive to chlorine, uses no reagents, is extremely stable, and has reduced maintenance and reduced whole life ...
The measuring system Krypton® DES includes all you need for disinfection measurement: instrument, sensor, assembly and wiring. The system is used for measuring free Chlorine, Chlorine dioxide, Ozone and Hydrogen peroxide. Measuring parameter and measuring range can be chosen in the menu. The integrated assembly Argon® Stabiflow ensures a constant flow of approx. 30 l/h. As a consequence ...
PureLine’s Pure3 generator line combines affordability with optimal efficiency and safety. Utilizing three precursors (sodium chlorite, sodium hypochlorite, and hydrochloric acid), the Pure3 system gives our customers the best in high efficiency, medium to high volume, and safe generation. With low maintenance cost and reliable operation, the Pure3 system can be built with a simple frame ...
The CLO2IX Portable Systems are the only mobile Chlorine Dioxide production systems. The rugged cart frame is built to take the abuse of going up and down stairs, over hoses, and through wet environments. In addition, the CLO2IX PRG Series Systems offer the flexibility of regenerable ion exchange vessels, which contain more ion exchange capacity than replaceable cartridges. Whether the ...
The CLO2IX Portable Systems are the only mobile Chlorine Dioxide production systems. The rugged cart frame is built to take the abuse of going up and down stairs, over hoses, and through wet environments. In addition, the CLO2IX PTG Series Systems utilize replaceable ion exchange cartridges, so there is no need to regenerate the system. Whether the application is emergency service or yearly ...
The chlorine dioxide area monitor is highly sensitive and selective indicator for the presence of traces of chlorine dioxide in air. Suitable location positions for the area monitor are on stack, duct, vent or flue where representative samples can be ...
The AQUACON CL02 process analyzer can be used for the monitoring and control of the chlorine dioxide concentration in water. Measurement principle is the determination of chlorine dioxide by dosing a special developed reagent to a buffered water sample until the sample changes its colour (titration). The colour change is detected by a monochromatic photometric detection system. The measurement is ...
M E D I A S P E C I F I C AT I O NCSO™, an activated alumina-based media shallconsist of manufactured, generally spherical,porous pellets measuring 1/8” in diameter.Pellets shall be formed from a combination ofpowdered activated carbon, alumina and otherbinders, suitably impregnated with causticchemicals to enhance the capacity for removal ofchlorine and sulfur dioxide. Impregnants shall ...