Only show results in Connecticut? Ok

Combustion Analysis services for Monitoring and Testing

  • Oil Boiler Service

    Did you know that soot 1mm in thickness inside your boiler can reduce heat transfer by 10%, while a 3mm layer can reduce it by 50%! Poor heat transfer means poor energy efficiency and higher kerosene consumption. Regular servicing ensures that your boiler is running at optimum efficiency, reduces the risk of sooting and therefore saves you money. ...

    By Paragon Energy based in Co. Kilkenny, IRELAND.

  • Commissioning & Training Services

    In order to realise the maximum performance potential of the products you purchase from Novatech, we encourage you to come to us for installation consulting, commissioning and training.

    By Novatech Analytical Solutions Inc. based in Ste-Anne-de-Bellevue, QUEBEC (CANADA). from Analytical Solutions Service line

  • Oil and Gas Production and Transmission Services

    EMCo specializes in oil field engine and turbine compliance testing. Our fully self-contained testing vehicle is capable of rapid mobilization - usually within 24 hours’ notice - and has the ability to begin reference method testing within minutes of arriving on-site, eliminating costly setup time. We understand how important it is for our ...

    By Emissions Measurement Company (EMCo) based in COLORADO (USA).

  • Noise Code Compliance Service

    AKRF's experts have worked on a wide variety of noise code-related projects in various municipalities throughout the northeast. In addition, we have extensive experience with the New York City Noise Control Code, and several of our experts are New York City Department of Environmental Protection-Approved Noise Consultants.

    By AKRF Inc. based in New York, NEW YORK (USA). from Acoustics, Noise & Vibration Services Service line

  • Custom CEMS Selection and Installation Support Services

    Assistance for additional or first-time installations in order to minimize frustration dealing with manufacturers' representatives and ensure proper equipment specifications and successful installations.

    By CEMS Experts - a division of GK Associates, Inc. based in Moopark, CALIFORNIA (USA). from CEMS Consulting and Engineering Service line

  • Repair Services

    When your remote inspection (RI) equipment is in need of repairs, Atlas Inspection Technologieshas you covered. Atlas is an authorized repair center for ARIES Industries, InsightVision, and Oxford Instruments equipment, and our expert technicians have access to a comprehensive inventory of replacement parts.

    By Atlas Inspection Technologies based in Seattle, WASHINGTON (USA).

  • Engineering Services

    Thermal engineering is at the heart of ERK’s business. With more than 6,100 boiler installations & hundreds of engineering contracts we boast unique expertise.

    By ERK Eckrohrkessel GmbH based in Berlin, GERMANY.

  • Chemical Analysis

    Acuren’s chemists and technologists take a multi-disciplined approach to ensure accurate, timely, and cost-effective results.  Techniques employed in our laboratories include optical emission spectroscopy, atomic absorption, energy-dispersive x-ray analysis, combustion, fire assay and wet chemical analysis. In the field our services ...

    By Acuren Inspection Inc based in Edmonton, ALBERTA (CANADA). from Materials Testing Service line

  • Quantitative Chemical Analysis Services

    Quantitative chemical analysis is performed to accurately determine the concentration, amount or percentage of one or more elements in a test sample. This technique, along with qualitative analysis, provides information on what and how much of each element is present in a sample for a complete elemental analysis. Quantitative chemical analysis can ...

    By Laboratory Testing Inc. based in Hatfield, PENNSYLVANIA (USA). from Materials Testing Service line

  • Pellets

    BIOS has been active in national and international R&D projects in the field of densified biomass fuels (i.e. pellets and briquettes) in cooperation with the Institute for Process and Particle Engineering, Graz University of Technology, since 2000. The main activities of BIOS in this field are: - Analyses and characterisation of pellets - ...

    By BIOS BIOENERGIESYSTEME GmbH based in Graz, AUSTRIA.

  • Dust Hazard Analysis (DHA) Services

    The Dust Hazard Analysis (DHA), also called a Process Hazard Analysis (PHA), is one of the most important steps you will take in order to mitigate the risk of combustible dust, fire and explosion. The dust hazard analysis is a formal, documented process that helps your company identify and address all relevant hazards, evaluate all ...

    By Lewellyn Technology, Inc. based in Indianapolis, INDIANA (USA). from Combustible Dust Services Service line

  • Biota Tissue Testing Analysis Services

    ACZ Laboratories, Inc. has over 25 years of experience analyzing plant and animal tissue for trace metals, organic and radiochemical contaminants. We have prepared and analyzed a variety of biota samples from across the world, including the Antarctic and the South Pacific. Due to the sensitivity of native organisms to many low-level manmade ...

    By ACZ Laboratories, Inc. based in Steamboat Springs, COLORADO (USA).

  • Physical Testing Services

    Because materials and processes can be defined and controlled using physical properties as well as their elemental or molecular composition, Galbraith provides a wide variety of physical tests. A growing number of these tests are performed each year. Tests are performed in accordance with a wide range of Compendial methods from ASTM, EPA, TAPPI, ...

    By Galbraith Laboratories Inc. based in Knoxville, TENNESSEE (USA). from Testing Capabilities Service line

  • Assessments, Upgrades and Optimisation Services

    Give your old energy plant new life! Through upgrades and/or optimisation we can help you obtain a stable operation, increased energy output, and emission levels that comply with today’s standards and legislation.Almost every old plant has the potential to perform even better. New technology provides many opportunities for existing plants to ...

  • Auditing of Boilers

    Performance evolution of Boilers. Feed air & Flue gas analysis. Optimization of excess combustion. Improved instrumentation for control. Improvement in operating practices. Incorporate heat recovery. Reduction of heat losses.

    By Eco Energies based in Sirsa, INDIA. from Major Plant Installations Audit Service line

  • Repairs Services

    Our service team is ready to assist you to minimize unscheduled stoppages due to an instrument malfunction. We work with you to ascertain the most expedient and cost effective way to solve the problem and get your system back on-line. Service is available on-site or at one of our 4 service centres according to the type of equipment and your needs. ...

    By Novatech Analytical Solutions Inc. based in Ste-Anne-de-Bellevue, QUEBEC (CANADA). from Technical Services Service line

  • Flue Gas Analysis Services

    Cronin Environmental offer the service of flue gas analysis using the Land combustion flue gas analyser. This instrument is a complete mobile unit. Measurements include: Temperature: CO2, O2: NOX, CO: SOX.

    By Cronin Environmental based in Cork, IRELAND.

  • Incident Investigation Services

    Gexcon has extensive experience through our ongoing research into the phenomena of explosions, fire and toxic releases. Our specialist expert consultants have investigated numerous incidents ranging from small vessel explosions and toxic releases to large explosions and fires at chemical processing and petrochemical facilities. Many of these ...

    By GexCon AS based in Bergen, NORWAY.

  • Heavy Lift

    PCCI specializes in the engineering of equipment and systems for heavy lift marine cargoes. PCCI engineers and naval architects consider the structural and vessel stability aspects of each job in the design, detailed fabrication and installation of lift components. Project examples include:

    By PCCI Inc based in Alexandria, VIRGINIA (USA). from Engineering Service line

  • Catalyst Cleaning - Recycling

    Catalytic Combustion can evaluate the condition of your catalyst and select one of our chemical cleaning procedures to perform on the catalyst. Even under optimal conditions, a catalyst’s performance may decline for reasons not readily apparent. This requires that the catalyst be first tested to determine whether or not it has been exposed ...

    By Catalytic Combustion Corporation (CCC) based in Bloomer, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you