Only show results in Michigan? Ok

Combustion Monitoring software for Monitoring and Testing

  • Premium

    CADET - Version V14 Premium - Control, Automation and Datalogging for Automotive Testing Software

    CADET enables operational personnel to easily compile test programs, automatically protect the test facility against out of limit operation, record data during testing and analyze the data during or at the completion of a test. Custom functions can be developed by the test engineer (using Visual Basic) to run during the test, these can provide ...

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • CEMQual - Solution for CEMS Data Logging and Reporting

    With the introduction of EN 14181, the Quality Assurance standard for emissions monitoring, operators of large combustion plants and incinerators will have numerous new requirements to comply with, the most onerous being QAL3 - the ongoing procedure to check the emission measurement quality. CEMQual has been designed to acquire the data and ...

    By Envirosoft Ltd. based in Derbyshire, UNITED KINGDOM.

  • Delphian Sage-CE - Web-Enabled Gas Monitoring System

    SAGE-CE is a powerful software/hardware product designed for the monitoring of toxic and combustible gases. Sage-CE runs on microcomputers connected in real-time to gas monitoring equipment via a Satellite-485. Up to eight Delphian sensors can be connected to each Satellite-485 (up to 5,000 feet). Each Satellite-485 is connected by twisted pair to ...

    By Delphian Corporation based in Northvale, NEW JERSEY (USA).

  • Dars

    DARS is a comprehensive toolkit integrated with STAR-CCM+ for the management and analysis of complex chemical reactions. It makes our customers more competitive in the market by enabling analyses of combustion of new fuels and in new operating ranges at a significantly reduced cost. DARS is a standalone simulation tool  for 0D and 1D ...

    By Siemens AG based in Munich, GERMANY.

  • CMC SmartCEMS - Version SCCT - Configuration Tools Software

    The SmartCEMS Configuration Tools is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Emission Master Software

    Our calculation platforms help the user to rapidly model chemical processes using the latest US EPA equations and techniques. Software features calculations for: (1) US EPA Chapter 16 equations and calculation methodologies for batch and continuous processes. Available process operations include filling, purging, heating, vacuum,  ...

    By Mitchell Scientific, Inc. based in Westfield, NEW JERSEY (USA).

  • Ingen - Energy Tracker Software Tool

    Energy Tracker is a software tool designed specifically for the offshore oil and gas industry, to monitor the energy efficiency of an installation in real time. It ensures the optimisation of plant performance, which in turn reduces the amount of harmful emissions being released into the atmosphere. At the same time its in-built web-enabled ...

    By Ingen based in Aberdeen, UNITED KINGDOM.

  • DataApex - EA Extension Software

    EA Extension is a software module for Elemental Analysis. Determining the Carbon, Hydrogen, Nitrogen, Oxygen, and Sulphur (CHNS-O) content of unknowns is one of the most basic and essential needs of any chemist. EA Extension provides a simplified version of the Clarity user interface that speeds up the workflow with elemental analyzers equipped by ...

    By DataApex based in Prague, CZECH REPUBLIC. from Clarity Extensions Software line

  • ci-Tec - Version Inspect Pro Control H - IR-Based Optimization of Temperature Distribution Software

    IR-based optimization of temperature distribution and combustion behavior. inspect pro control H acquires the image data from infrared cameras which can cover all the way into the feed of the rotary kiln, depending on the spectral range. inspect pro control H inspect pro control H then uses these characteristic values to optimize incineration ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • ci-Tec - Version Inspect Pro Control C - Process-Control Optimization Software

    Process-control optimization with camera-based characteristic. inspect pro control C acquires and analyzes image data obtained from high performance infrared cameras in cement rotary-kiln systems. The so ware preprocesses image data and calculates characteristic parameters of the combustion behavior. On this basis, process control is adapted to ...

    By ci-Tec GmbH based in Karlsruhe, GERMANY.

  • Dewesoft - Version X3 - Automotive Testing Software

    Dewesoft X software includes ready to use modules - FFT analyzer, order tracking, torsional and rotational vibrations, structural analysis, which make data analysis much faster and easier.It also provides possibility to measure all the parameters needed to analyze power, combustion, mechanical and other aspects of vehicle, which is key while ...

    By Leane International - Automotive Division based in Parma, ITALY.

  • CMC SmartCEMS - Version SCCPM - Continuous Parametric Monitor

    The SmartCEMS-Continuous Parametric Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas calculations for pollutants and diluents from various sources. The Continuous Parametric Monitor will meet the requirements of 40 CFR Part 60, Appendix B, PS-17. The Continuous Parametric Monitor is ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • CMC SmartCEMS - Version SCAEM - Alternative Emission Monitor

    The SmartCEMS Alternative Emission Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents. Sources monitoring using this product are typically not regulated under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75. The Alternative Emission Monitor product ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • Emission Master Combustion

    Combustion occurs during basic power generation operations where steam, electricity, and other forms of power are produced through the burning of basic fuels such as natural gas, oil, and coal.  When these fuels are burned many different compound emissions result in the exit gas stream from the power plant.  Combustion emissions also ...

    By Mitchell Scientific, Inc. based in Westfield, NEW JERSEY (USA).

  • Combustion Analysis Software

    Mirenco utilizes the latest in portable emissions monitoring equipment, computer software, and technical expertise to analyze the exhaust emissions coming from each piece of diesel powered equipment. This helps determine the current state of combustion for each power unit. In comparing emissions data from equivalent engines, it is possible to ...

    By Mirenco Inc. based in Radcliffe, IOWA (USA).

  • CMC SmartCEMS - Version PEMS - Predictive Emissions Monitoring System Software

    The SmartCEMS PEMS Analyzer is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part 60, ...

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA).

  • regAction webEI - Emissions Inventory System

    regAction webEI (Emissions Inventory) delivers a consolidated solution that simplifies organizational efforts for gathering data, calculating emissions and agency reporting.

    By regAction based in Houston, TEXAS (USA). from Emissions Inventory System Software line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you