Only show results in Michigan? Ok

Diode Laser Gas Monitoring equipment for Monitoring and Testing

  • Premium

    GPro - Model 500 - Carbon Monoxide Sensor

    The most accurate and reliable instrument for efficient combustion control applications. The GPro 500 CO TDL is the most accurate and reliable instrument for efficient combustion control applications. By allowing trim control operation mode, the excess air limit can be lowered and adapted to changing conditions without jeopardizing safety.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    GPro - Model 500 - Moisture Sensor

    Direct measurements in the gas stream. The GPro 500 Moisture TDL allows drift-free, virtually maintenance-free operation in dry storage applications by allowing the measurement of water vapor at ppm levels to protect your assets from corrosion damage in applications including: Process control, Cl2 storage, EDC storage.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    GPro - Model 500 - Carbon Dioxide/Monoxide (CO2% / CO%)

    CO2% / CO% range Dual Spectrometer GPro 500. For the top performance in these applications: FCC units, styrene, syngas.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    NEO Monitors LaserGas - Model III SP - Single Path Analyser for Oxygen

    NEO Monitors LaserGas III SP oxygen analyzer (3rd generation) is specifically designed for service in hazardous areas. The analyzer consists of transmitter and receiver unit that are mounted diametrically opposite each other on stack, ducts or reactors. The laser will cross the process gas and concentration changes are detected in-situ and in real ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    LaserGas - Model III SP CO - Compact Combustion Analyzer System

    NEO Monitors LaserGas III SP CO (3rd generation) is specially designed for operation in hazardous areas and it provides real time in-situ CO measurements for virtually any type of combustion control. The configuration is transmitter/receiver units for cross-stack installation. An external junction box simplifies installation and maintenance. The ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    NEO Monitors LaserGas - Model Q NO - Tuneable Laser Absorption Spectroscopy (TLAS)

    NEO Monitors LaserGas Q NO is using Tuneable Laser Absorption Spectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state  laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems  further improves  ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    NEO Monitors LaserGas - Model III SP NH3 DeNOx - Ammonia Analyzer (3rd Generation)

    NEO Monitors LaserGas III ammonia analyzer (3rd generation) is specially designed for operation in hazardous areas and it provides real time in-situ NH3 measurements for virtually any type of DeNOx systems. The configuration is transmitter/receiver units for cross-duct/stack installation. An external junction (cable connection) box simplifies ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    Axetris - Model LGD F200 OEM - Laser Gas Detection Module

    Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to ...

    By Axetris Ag based in Kaegiswil, SWITZERLAND. from Laser Gas Detection Module Product line

  • Premium

    Boreal Laser - HF Point Detector

    The RPX Probe is a measurement head for our series of GasFinder3-DC analyzers that provides a path average concentration in the active measurement path (ambient atmosphere). Primary uses of the RPX Probe with the GasFinder3-DC are: Continuously monitor gas concentrations over point sources. Provide an Immediate and unambiguous detection of gas ...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA). from HF Point Detector Product line

  • Premium

    Axetris - Model LGD F200-A NH3 - Laser Gas Detection Modules

    Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to ...

    By Axetris Ag based in Kaegiswil, SWITZERLAND. from Laser Gas Detection Modules Product line

  • Premium

    Axetris - Model LGD F200-A CO2 - Laser Gas Detection OEM Module

    Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to ...

    By Axetris Ag based in Kaegiswil, SWITZERLAND. from Laser Gas Detection OEM Module Product line

  • Premium

    Opsis - Model LD500 - Laser Diode Gas Analyser (CEM)

    OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. A built-in PC with LCD display controls the function of the instrument.

    By Opsis AB based in Furulund, SWEDEN. from Laser Diode Gas Analyser (CEM) Product line

  • Premium

    Opsis - Model LD500 - Laser Diode Gas Analyser (AQM)

    OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. The laser diode gas analyser provides very fast monitoring of a range of gaseous compounds. Several gases can be monitored and a multiplexer offers several ...

    By Opsis AB based in Furulund, SWEDEN. from Laser Diode Gas Analyser (AQM) Product line

  • Premium

    Opsis - Model ER060L-EEx - Emitter and Receiver Systems

    The ER060L-EEx emitter and receiver set, together with Opsis LD500 laser diode gas analyser, is designed for gas monitoring in explosion classed areas Zone 1 and 2. The monitoring set creates a light path across the internal diameter of a stack or duct for an Opsis emissions monitoring system. Light is generated by the analyser, passed through the ...

    By Opsis AB based in Furulund, SWEDEN. from Emitter and Receiver Systems Product line

  • Premium

    Axetris - Model LGD F200-H HCl - Laser Gas Detection OEM Module

    Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to ...

    By Axetris Ag based in Kaegiswil, SWITZERLAND. from Laser Gas Detection OEM Module Product line

  • Premium

    Axetris - Model LGD F200-A CH4 - Laser Gas Detection Modules

    Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to ...

    By Axetris Ag based in Kaegiswil, SWITZERLAND. from Laser Gas Detection Modules Product line

  • Premium

    Axetris - Model LGD F200P2-H NH3 - Laser Gas Detection Modules

    Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to ...

    By Axetris Ag based in Kaegiswil, SWITZERLAND. from Laser Gas Detection Modules Product line

  • Premium

    Axetris - Custom OEM Module

    Axetris AG is a designer and OEM manufacturer of Laser Gas Detection (LGD) solutions based on Tunable Diode Laser Spectroscopy (TDLS). The TDLS technology provides a valid solution to many gas detection challenges. We support our OEM customers with in-depth technology and application expertise from feasibilities until product launch. We ...

    By Axetris Ag based in Kaegiswil, SWITZERLAND. from Custom OEM Module Product line

  • Premium

    Boreal Laser - Dual Channel TDL Analyzer

    The OPX Head is a measurement head for our series of GasFinder3-DC analyzers that provides a path integrated concentration (ppm-m) in the active measurement path (ambient atmosphere). Primary uses of the OPX Head with the GasFinder3-DC are: Continuously monitor gas concentrations over open area sources. Provide an Immediate and unambiguous ...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA). from Dual Channel TDL Analyzer Product line

  • QuanSens - Model QS9000 - TDLAS Gas Analyzer

    The QS9000 is a laser based in-situ gas analyzer which measures the concentration of flue gases in a cross-duct configuration using the Tunable Diode Laser Absorption Spectroscopy (TDLAS) technique. This technique delivers highly accurate and reliable data which is not affected by the background gases and environmental conditions. QS9000 performs ...

    By QuanSens based in Tehran, IRAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you