Only show results available in Virginia? Ok

Direct Push Drilling equipment for Monitoring and Testing

  • Premium

    AMS - Model 9120-RAP-D - PowerProbe

    The 9120-RAP-D PowerProbe machine is a new and improved design for the 9100 series models that allows you to use a UTV style 4x4 or 6x6 to get in remote jobsites for shallow direct push applications with 4-foot DP Extensions. This model comes standard with our 90-ft-lb hydraulic hammer to sample in almost any type of soil condition you run in to. ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerProbe Product line

  • Premium

    AMS - Model 9520-D - Power Probe System

    The 9520-D (Diesel) PowerProbe runs off of a 60 hp liquid-cooled, turbo-charged diesel engine. It comes standard with a 350 ft-lb hydraulic hammer for direct push, groundwater, soil gas, and remedial injection type sampling. Like the 9520-VTR, this model can also be equipped with our 4,000 ft/lb auger motor and 3,000lb winch assembly. This model ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Power Probe System Product line

  • Premium

    AMS - Model 9120-RAP - PowerProbe

    The 9120-RAP PowerProbe machine is a new and improved design for the 9100 series models that allows you to use a UTV style 4x4 or 6x6 to get in remote jobsites for shallow direct push applications with 4-foot DP Extensions. This model comes standard with our 90-ft-lb hydraulic hammer to sample in almost any type of soil condition you run in to. ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerProbe Product line

  • Premium

    AMS - Model 9400 Series - PowerProbe

    The PowerProbe 9400 Series is our mid-sized PowerProbe. The track-mounted 9410 VTR is compact for limited access areas being 56 inches wide, but maintains great augering (3,000 ft-lb) and direct push drilling (200 ft-lb) power. Fully loaded with all options (winch, SPT Hammer, Direct Push Hammer, and Auger Motor), it has a surface load of only 5.6 ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    AMS - Model 9110-LAP and 9110-Power - Portable Direct Push Rig

    The AMS PowerProbe 9110-LAP is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9110-LAP comes standard with a 90 ft-lb ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Portable Direct Push Rig Product line

  • Premium

    PowerCore - Model 9410 - System

    The PowerCoreTM 9410 allows you to limit the number of employees needed on site. Each model is set up with our standard direct push capability by using a 200 ft-lb. hydraulic hammer along with a 2400 ft-lb. hydraulic core motor that can core through concrete and asphalt to allow access for the collection of intact continuous soil cores. The ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from System Product line

  • Direct Push Injection

    Direct Push Injection for remedial purposes is one of our key competences. Close to a decade has learned us how to deal with the challenges our soils give us.

    By Nocon BV based in Hoofddorp, NETHERLANDS.

  • Revolmixing - Model G - High Performance Centrifugal Dispersing Impeller (HPCDI)

    HPCDI – G is designed for general mixing. It create the Tornado force above and under the impeller. The upper tornado drawdown the floating material to the impeller and dispersed. Polymer dilution, as an example, the dry polymer needs be drawdown to the impeller for effectively diluted. The bottom Tornado will suspend and mix heavy solids, ...

    By Revolmixing based in Calgary, ALBERTA (CANADA).

  • Revolmixing - Model X - High Performance Centrifugal Dispersing Impeller (HPCDI)

    HPCDI – X is designed for anoxic/anaerobic mixing, or other oxygen sensitive mixing, where the least surface disturbance is desired.

    By Revolmixing based in Calgary, ALBERTA (CANADA).

  • Tenbusch - Sliplining Systems

    Sliplining is generally considered as the installation of a smaller diameter pipe into a larger diameter pipeline. Tenbusch Inc. designs and fabricates heavy duty sliplining equipment for installation of medium to large diameter pipelines. This includes both single and dual push direction units. Dual push direction units install pipe in both a ...

    By Tenbusch Inc. based in Lewisville, TEXAS (USA). from Sliplining Systems Product line

  • Revolmixing - Model T - High Performance Centrifugal Dispersing Impeller (HPCDI)

    HPCDI – T is designed for tall and slim tank mixing. The impeller will disperse to the particles directly to the top and bottom for efficiency mixing.

    By Revolmixing based in Calgary, ALBERTA (CANADA).

  • UVOST - Ultra-Violet Optical Screening Tool

    Dakota's UVOST product efficiently delineates petroleum, oil, and lubricant (POL) contaminants in the subsurface. All the usual forms of POLs, including; gasoline, diesel fuel, jet fuel, and hydraulic fluids, can be detected via the fluorescence response of their polycyclic aromatic hydrocarbon (PAH) constituents. The fluorescence signal scales ...

    By Dakota Technologies, Inc. based in Fargo, NORTH DAKOTA (USA).

  • Model SS-10 - Stainless Steel Tubing Check Valve

    The Micro Flow System is popular for use in direct push technology micro well installations. The SS-10 footvalve can deliver a sample from as deep as 75 feet and flow rates with this system are usually less than 1/2 gallon per minute.

    By Environmental Service Products based in Irvine, CALIFORNIA (USA). from Stainless Steel Tubing Check Valve Product line

  • Solinst CMT - Model 403 - Continuous Multichannel Tubing

    CMT Multilevel System consists of 7 discrete zones. Zones are packed off using bentonite to eliminate vertical contamination between sand packed sampling ports. Depth discrete data obtained from CMT increases risk assessment accuracy, improves decision making, optimizes performance of site remediation, and provides vertical hydraulic head data for ...

    By Solinst Canada Ltd. based in Georgetown, ONTARIO (CANADA). from Continuous Multichannel Tubing Product line

  • Model SS-10 - Stainless Steel Valve

    The Micro Flow System is popular for use in direct push technology micro well installations and multi-level installations. The SS-10 foot valve can deliver a sample from as deep as 75 feet and flow rates with this system are usually less than 1/2 gallon per minute.

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Stainless Steel Valve Product line

  • Model 15 & 16 - Screen Point Groundwater Samplers

    The Screen Point 15 & 16 Samplers are devices consisting of a stainless steel screen inside of a sealed, steel sheath that is driven to a specified depth at which the screen is deployed for the collection of representative groundwater samples. The Screen Point sampler is driven into the ground using direct push technology and tooling. The ...

    By JOHNSON Probing, LLC based in Batavia, ILLINOIS (USA).

  • Model type CX - Hydraulic Torque Wrench

    High-speed system for  torques up to 40,000 Nm: Dual-hose system, designed for maximum oil flowrates. Compatible to all ITH pumps of the DAX series. Universal nut tool: Several inserts applicable for a flexible use. For both service and production assemblies. Large reaction area : The asymmetrical support can be flipped in both directions and ...

    By ITH GmbH & Co. KG based in Meschede, GERMANY. from Hydraulic Torque Wrench Product line

  • Geoprobe - Model 7822DT - High-Capacity Direct Push Machine

    The Geoprobe Model 7822DT is a high-capacity direct push machine with a narrow platform for limited access areas and a sufficient stroke for added work space under the hammer. This machine is equipped with many of the features Geoprobe customers are accustomed to, and with many new advantages to offer customers flexibility in all types of field ...

    By Geoprobe Systems -Kejr, Inc. based in Salina, KANSAS (USA). from High-Capacity Direct Push Machine Product line

  • LogiLAB - LogiLAB ELN

    LogiLab ELN acts as a middleware between the instrument and the LIMS. Samples and their tests along with job schedule will move to the ELN. Respective person when logs into ELN will receive allotted work and start performing tests and capturing data for specific test and sample(s). Instrument results can be pushed from instruments by printing or ...

    By Agaram Technologies based in Chennai, INDIA.

  • Stainless Steel Tubing Check Valve

    The Micro Flow System is popular for use in direct push technology micro well installations. This footvalve can deliver a sample from as deep as 75 feet and flow rates with this system are usually less than 1/2 gallon per minute.

    By Environmental Service Products based in Irvine, CALIFORNIA (USA). from Stainless Steel Tubing Check Valve Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you