Only show results in Massachusetts? Ok

Dust Sampling services for Monitoring and Testing

  • Showcase

    Industrial Hygiene Special Surveys Service

    Welding Fumes Testing/Sampling. Welding fume can harm the health of employees, causing both short term (acute) effects and long term (chronic) effects. Workers can be affected even if employers comply with the OSHA Permissible Exposure Limit (PELs) for exposure, as OSHA’s final standards do not always keep up with current science. Acute ...

    By Atlantic Environmental, Inc. based in Dover, NEW JERSEY (USA). from Industrial Hygiene Service line

  • Dust Monitoring

    Envirochem are UKAS accredited for Sampling & Analysis of Total Inhalable & Respirable Dusts.We are happy to undertake site visits, sampling and analysis, to meet the needs of our clients. The initial phase of any project is a discussion about the requirements and what is hoped to be achieve from the monitoring.The aims of the project will affect ...

    By Envirochem Analytical Laboratories LTD based in Fareham, UNITED KINGDOM.

  • Ceramic Catalytic Converters

    Approximately 95% of all catalytic converters worldwide are ceramic-based. They feature a reactive surface with a coating containing platinum, palladium or rhodium – valuable precious metals that we recover at the end of the recycling process. Maximum exploitation and avoidance of any residues are dependent on many crucial factors, all based ...

    By Hensel Recycling based in Aschaffenburg, GERMANY. from Materials Service line

  • Asbestos Services

    TEM analysis of air, bulk, dust, and water samples. PLM analysis of bulk samples. PCM analysis of air samples.

    By QuanTEM Laboratories based in Oklahoma City, OKLAHOMA (USA). from Lab Services Service line

  • Chemical Analysis Services

    We are realising gas and particle analysis on site or also in our chemistry laboratory at our head office in Stadthagen.

    By Luehr Filter GmbH based in Stadthagen, GERMANY.

  • Lead Investigation / Risk Assessment Services

    ACT performs limited and comprehensive lead-in-paint investigations and risk assessments in which all painted surfaces observed throughout a building are documented and sampled for the presence of, or assumed to contain lead, depending on the clients needs. Soil samples and dust wipes are also collected for investigations being performed according ...

    By ACT Environmental Services, Inc. based in Indianapolis, INDIANA (USA).

  • Gravimetric Dust Monitoring

    The gravimetric sampling of dust of an airborne nature is not only the internationally acceptable method of determining dust concentrations but is in general use in South Africa. While the Department of labour advocates the sampling method, they do not have their own sampling guidelines or established method and use that devised by the Department ...

    By DustWatch cc based in Sun Valley, SOUTH AFRICA.

  • Microbiology Services

    Non-Culture Based Methods: Spore trap analysis to identify and quantify airborne mold. Detailed spore trap analysis to identify and quantify mold, pollen, debris, fibers, skin. Tape Lift samples. Swab samples. Bulk samples. Dust/Vacuum.

    By QuanTEM Laboratories based in Oklahoma City, OKLAHOMA (USA). from Lab Services Service line

  • Mold & Fungi Bulk Sampling Services

    The Mold Samplers will hunt down visible and invisible mold in your house or building and perform bulk sampling to determine if there is a problem.

    By All Phase Environmental, Inc. based in Huntington Beach, CALIFORNIA (USA).

  • Combustible Dust Testing Services

    NFPA Standards say, “The owner/operator of a facility with potentially combustible dusts shall be responsible for determining whether the materials are combustible or explosible and, if so, to characterize their properties as required to support the process hazard assessment.” Your dust is unique and must ...

    By Lewellyn Technology, Inc. based in Indianapolis, INDIANA (USA). from Combustible Dust Services Service line

  • Lead on Surfaces

    The examination of Lead on Surfaces is conducted using wipe samples.  This Dust/Wipe category of environmental lead investigations often is employed to establish baseline conditions of surfaces as well as to establish clearance criteria after an abatement activity. AIHA and others have promulgated strict field sampling protocols.  ...

    By International Asbestos Testing Laboratories (iATL) based in Mt. Laurel, NEW JERSEY (USA). from Lead Analysis Service line

  • Microbiology Laboratory Services

    Our microbiology laboratories support a wide range of indoor air quality, mold and other environmental investigations conducted throughout the U.S. We specialize in the analysis of indoor air quality samples for common fungi, yeasts and bacteria found in residential and commercial properties. In addition to fungal analysis, we offer an extensive ...

    By EFI Global, Inc. based in Humble, TEXAS (USA). from Specialty and Consulting Service line

  • Dust Monitoring Equipment Services

    As a company Dust Monitoring Equipment (DustWatch CC) offers many services that fall under our expertise.

    By DustWatch cc based in Sun Valley, SOUTH AFRICA.

  • Monitoring Equipment Hire Service

    ESG provide exceptional instrument hire and support services to the waste management, mining, civil engineering, power generation and environmental industries.

    By Environmental Scientifics Group based in Staffordshire, UNITED KINGDOM. from Environmental Safety Compliance Service line

  • Mold and Bacteria Prevention and Remediation

    Our company provides consultation, inspection, mold prevention, remediation and analytical services to insurance companies, residential, commercial, industrial, governmental and educational facilities throughout the nation. Mold Inspection & Remediation is carried out as per OSHA & EPA Standards. We adhere to the codes of practice proposed by the ...

    By EcoForce Environmental Inc. based in Dublin, OHIO (USA).

  • Lead Paint Test Services

    AAT can provide your firm the analysis of any heavy metal including but not limited to: Lead, Mercury, Cadmium, Copper, Zinc... by any of the analytical techniques listed below. Flame Atomic Absorption Spectrometer (FLAA). Graphite Furnace Atomic Absorption Spectrometer (GFAA). Inductively Coupled Plasma Spectrometer (ICP). Cold vapor Atomic ...

    By Accurate Analytical Testing, LLC (AAT) based in Belleville, MICHIGAN (USA).

  • Occupational & Hygiene Audits

    With the many changes and revisions taking place in the draft documentation being prepared to complement the Mine Health and Safety Act, we feel that a general comment in this regard as well as a look at the specific issues is needed.

    By DustWatch cc based in Sun Valley, SOUTH AFRICA.

  • Direct Microscopic Examination

    Analysis includes a determination of whether spores present are indication of mold growth or normal trapping (fall out of the spore coming from outside). Identification is to fungal genus level.

    By Southeast Environmental Microbiology Laboratories (SEEML) based in Greenville, SOUTH CAROLINA (USA). from Surface Samples Service line

  • Mold Consulting Services

    Indoor air contamination by mold is an emotionally charged issue. Mold spores can cause allergic reactions, especially to people with asthma, allergies or a compromised immune system.A causal link between more serious health effects and mold exposure is a topic of debate and on-going research within the scientific community. AirQuest has developed ...

    By AirQuest Environmental, Inc. based in Fort Lauderdale, FLORIDA (USA).

  • Air Quality and Permitting Services

    The NSR program authorizes new construction or modifications and establishes emission controls and limits based on applicable rules, best available control technology evaluation, and impacts review.  NSR authorizations range from de minimis criteria, permits by rule, standard permits to various types of state and federal case-by-case permits. ...

    By Talon/LPE based in Amarillo, TEXAS (USA). from Environmental Consulting Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you