Only show results available in Connecticut? Ok

Element Analyses services for Monitoring and Testing

  • Support

    TSHR International offers through its global distribution network, extensive sales and service support for the Combustion Elemental Analyzers. A timely and adequate support and the supply of original and quality consumables and spare parts are key to ensure the continuity and quality of your daily trace level elemental analysis requirements.

    By Technical Support Heijstraten Roest (TSHR) based in Rotterdam, NETHERLANDS.

  • XRF Sales and Support

    Eastern Applied provides Sales, Service and Support for all thickness testing instruments. Specializing in sales of non-destructive X-ray Fluorescence Instruments, with both new SIINT (Seiko) and reconditioned available. The SIINT (Seiko) line of elemental analyzers (SEA line) perform hazardous substance testing (RoHS, WEEE, etc) with the highest ...

    By Eastern Applied Research, Inc. based in Lockport, NEW YORK (USA).

  • Civil Engineering/Construction

    Design of Roads, Bridges, Building & Sewage System, Road & Bridge Construction, Hydraulic Design & Water Supply, Building & Location Construction, Geotechnical Analysis, Preparation & Installation of Pre-Cast Elements.

    By Jam Services Company Ltd based in Port-Harcourt, NIGERIA.

  • Kenway - Tank & Tower Installation Services

    Kenway specializes in the fabrication and onsite chemical storage tank installation of new and replacement tanks across the United States including chloralkali tank installation. We combine over 60 years of experience with engineering expertise in the design and fabrication of cost-effective heavy corrosion resistant tanks and vessels. We have an ...

    By Kenway Corporation based in Augusta, MAINE (USA).

  • Cable Analysis Service

    Through a number of recent projects, and in line with a growing need to understand the effect of fatigue on cable service life, Mojo Maritime have successfully developed and used a number of cable analysis techniques.

    By Mojo Maritime Ltd based in Cornwall, UNITED KINGDOM.

  • Engineering

    SIGMA Ingenieurgesellschaft mbH offers a wide variety of engineering services, Upon request, our project consulting service supports you in organizing and structuring your projects on the spot and develops possibilities of standardization and streamlining in integrated project teams together with you. In case of capacity bottlenecks our ...

    By SIGMA Ingenieurgesellschaft mbH based in Unna, GERMANY.

  • Design & Engineering Services

    Effox-Flextor has a dynamic team of designers and engineers who thrive on the technical challenges of engineered-to-order industrial products. Our technical staff includes graduate and professional engineers highly experienced in the damper and expansion joint industries. Our staff has considerable field experience including countless ...

    By Effox-Flextor - CECO Environmental based in Cincinnati, OHIO (USA).

  • On-SiteTesting Services

    On-site testing of fuels and lubricants is becoming recognized as the most cost-effective way to provide project engineers and managers with critical, reliable data during plant construction projects or when an installation is being serviced. Results of fuel analysis are available in a matter of hours rather than days. Immediate measures can then ...

    By Texas OilTech Laboratories Inc. based in Houston, TEXAS (USA).

  • Advanced Microscopy

    The Microscopy group includes staff and equipment to perform FESEM (Field Emission Scanning Electron Microscopy), which is used for surface structural and cross-sectional analysis. EDX (Energy Dispersive X-Ray Spectroscopy) is used to perform Elemental materials analysis, both qualitative and quantitative. FETEM (Field Emission Transmission ...

    By Evans Analytical GroupĀ® (EAG) based in Sunnyvale, CALIFORNIA (USA).

  • Analysis and Optimization Services

    SoftInWay offers extensive analytical expertise with a goal of evaluating performance, carrying out machine benchmarking, simulating design, and various off-design operational modes. To obtain the geometry of existing machines we can work with different sources of input information, such as; 2D drawings, 3D CAD solid models, and laser scanned ...

    By SoftInWay Inc. based in Burlington, MASSACHUSETTS (USA).

  • Seismic Analysis and Testing Services

    Powertech has expanded its seismic testing capabilities from small to large, heavy test articles through partner labs. These capabilities allow users to investigate and quantify the effects on structures and equipment of the forces associated with seismic events—and thereby better understand product reliability and have increased confidence ...

    By Powertech Labs, Inc. based in Surrey, BRITISH COLUMBIA (CANADA).

  • Tank Design And Construction Services

    CROM adheres to the highest standards of professional engineering and construction. Tank structures are design and built in compliance with applicable sections of: ACI 372R Guide to Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete Structures, published by American Concrete Institute. ANSI/AWWA D110 Wire- and ...

    By The Crom Corporation based in Gainesville, FLORIDA (USA).

  • Engineering Services

    Air Comm Engineering Leads the Industry; As the premier leader in aviation heating and cooling systems, Air Comm’s technical staff is comprised of aerospace, mechanical, structural, electronic and software engineers who each bring a unique set of talents and expertise in order to develop state of the art systems for fixed wing aircraft and ...

    By Air Comm Corporation (ACC) based in Westminster, COLORADO (USA).

  • Advanced Engineering Services

    From our roots as a production-driven organization, Winkle has evolved into an engineering-driven firm dedicated to product innovation and customized solutions. Our success is the result of our continuing recruitment of the industry's top engineering professionals and investment in advanced engineering technologies. With the development of OptiCon ...

    By Winkle Industries based in Alliance, OHIO (USA).

  • Chromatic Elemental Imaging Services

    Pioneered by Avista Technologies for customers worldwide, Chromatic Elemental Imaging (CEI) is an extremely accurate, high resolution imaging technique that identifies the exact location and concentration of elements in a foulant sample. CEI is excellent for analyzing mixed foulant samples when other analytical tools provide limited results.

    By Avista Technologies, Inc. based in San Marcos, CALIFORNIA (USA).

  • Material / Mechanical Testing Services

    Lonestar has performed tests simultaneously incorporation Chemical Analysis, Hardness, Tensile Properties, Impact Properties, Macro / Micro Examinations on a wide array of products including raw plates, seamless pipe, weldments including: Plates, pipes, joints, fabricated materials and structural components. The testing may be part of a Quality ...

    By Lonestar Technical Services based in Dubai, UNITED ARAB EMIRATES.

  • Our Services

    We offer expertise critical for identification of undesirable sources of sound and vibration in addition to enginerin design and analysis skills to limit sound and vibration in products and systems.

    By Sound and Vibration by Design based in Superior, COLORADO (USA).

  • SEM / X-Ray Analysis Services

    Meissner employs a variety of different instruments to aid in the analysis and identification of contaminants removed from filtered fluids. Through SEM and X-ray analysis, as well as low vacuum imaging of a filter's surface, MTS can assist customers in identifying both organic and inorganic contaminants removed.

    By Meissner Filtration Products, Inc. based in Camarillo, CALIFORNIA (USA).

  • Chemical Analysis

    As standard practice within our company a Certificate of Analysis is supplied with all ordered materials. X-ray diffraction and spectrographic analyses are carried out for each element and compound. For non-metallic impurities, such as Oxygen, data is available upon request.

    By Testbourne Limited based in Hampshire, UNITED KINGDOM.

  • Computational Modelling and Simulation Services

    BHR Group is in the privileged position within the UK by offering an integrated approach to modelling and simulation through the option of additional scaled physical modelling, experimental work and on-site testing and evaluation allowing us to validate and calibrate our results. Our highly qualified analysts and experienced engineers provide ...

    By BHR Group Limited based in Cranfield, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you