Only show results in Texas? Ok

Environmental Analysis services for Monitoring and Testing

  • Premium

    Spectroquant- Analytical Quality Assurance

    Today analytical quality assurance (AQA) is a decisive factor in wastewater analysis. Only quality assurance measures that check your processes from start to finish ensure that your findings ultimately count as secure, reproducible, reliable and recognized analytical results. Our Spectroquant® analysis system and the components that make up ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Spectroquant - USEPA

    The Spectroquant® methods for environmental measurements listed in the downloadable .pdf file below are compliance monitoring methods in accordance with the specified USEPA (U.S. Environmental Protection Agency) methods or standard methods. The USEPA granted its approval to Merck’s Spectroquant® methods. You thus obtain results ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Field Services

    Our Field Services Group was created to provide technical assistance to contractors, engineers, and consultants using polymer and mineral based drilling fluids. Our services are generally utilized to train customers in the mixing, testing, and disposal  of slurry.  Our team can also be made available to stay on site and  monitor the ...

    By CETCO based in Wallasey, UNITED KINGDOM.

  • Premium

    Machine Diagnosis for Professional Data Analysis Services

    Machine diagnosis means testing the units for vibration. The goal is to extend the units’ run time by measuring their vibration on a regular basis. AERZEN’s alternative is to measure vibration, temperature and RPM with a mobile device, as well as using an integrated system for constant online monitoring.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Analysis and Consulting Service line

  • Premium

    Laboratory Test and Pilot Plants Services

    Each company has its own characteristics. For a truly customized solution, ECO-TECHNO can make laboratory tests with lab or pilot plants. The analysis is performed directly by the staff in our research lab or at the customer premises.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    Preventive Maintenance and Oxidizer Evaluations Services

    Did you know that some air permits require oxidizer operators to have scheduled maintenance programs for their systems in order to remain in compliance with regulations? The Anguil PME is a thorough audit of a system's operation, covering multiple days and an extensive checklist. Upon completion, customers receive a detailed report with ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Oxidizer Aftermarket Services Service line

  • Premium

    Remote Monitoring Services

    Kurita defines IT sensing technology as the foundation of solutions provided to customers, and visualizes the water treatment status using its original system to provide services for the remote monitoring of customers' water treatment conditions. The purpose of these services is to monitor the water treatment conditions and effects of treatment on ...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Pharmaceutical Microbiology Services

    Environmental monitoring evaluation and development. Evaluation and development of protocols and cleaning procedures. Evaluation and development of procedures, policies and standards for media fills. Laboratory Management. Optimization of laboratory policies, procedures, equipment, and methods. Sterility test analysis and evaluation of positive ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Advisory Services Service line

  • Premium

    Air Sampler Calibration - Air Sampling Calibration Services

    UKAS Air Sampler Flow CalibrationInvolved with air sampling regulatory or compliance measurements to OSHA, NIOSH, ASTM, ARCA, CAR 2012 or HSG 248 standards then you should be gaining UKAS accredited calibrations for your master air flow sampling system. Regular UKAS accredited calibration of your air sampler system whether this be a flowmeter, ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Premium

    Model Evaluation Services

    CERC’s consultants are highly experienced in evaluating the performance of environmental models, at a range of spatial and temporal scales, against measured data. We have expertise in using a range of graphical and statistical methods to determine model performance for both long-term assessments and short-term forecasts.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM. from Environmental Consultancy Service line

  • Premium

    Service support for your Waste to Energy and gas upgrading plant

    As biogas all-rounders, we know biogas generation processes better than anyone and offer a service package that guarantees your peace of mind.Your advantages at a glance:+ Service from a single sourceTo keep your plant running efficiently, it’s important that the services offered are perfectly coordinated and that your service partner is ...

    By EnviTec Biogas AG based in Lohne, GERMANY.

  • Premium

    Quantitative Real-Time PCR with Metalworking Fluids Services

    Metalworking Fluid users are well aware of the problems caused by unwanted bacterial and fungal colonization of their fluids. Numerous species of microorganisms can cause problems in functional fluids and, barring use of clean-room techniques, all industrial fluids are plagued by constant inoculation with microorganisms.

    By Microbe Inotech Laboratories, Inc based in St. Louis, MISSOURI (USA). from Industrial Services Service line

  • Premium

    Risk Assessment Services

    Performed using Failure Mode and Effects Analysis (FMEA), Hazard Analysis (HACCP), and other methods Evaluation of laboratories, production, and quality operations. Development of programs and procedures. Review of data trends and recommendation of alert and action levels. Risk Assessment for EM sampling locations.

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Advisory Services Service line

  • Premium

    Stable Operation of Water Treatment Facilities

    Visualizing the water treatment status using IT sensing technology to help customers conduct stable operation of their facilities. In order to realize stable operation of factories and provide customers with a sense of security, Kurita is dramatically changing the concept of water treatment services. We define IT sensing technology as the ...

    By Kurita based in Tokyo, JAPAN. from Solutions Service line

  • Premium

    Field Studies Services

    Using our X-ray Based Filter Method (XFM) CES can survey most stack emissions on your facility for up to 48 different elements per sample. The samples are collected on a filter, which can be readily shipped to our laboratory for analysis by non-destructive x-ray fluorescence (XRF) procedures similar to those listed in EPA’s Compendium Method ...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Premium

    Thermal Imaging Services

    Renown for its' versatility within the predicitive maintenance sector, thermal imaging services can also provide a valuable insight into the flow characterisitics and problematic issues with a host of Research and Development applications. A full range of thermal camera and infrared calibration services are also offered within the Temperature ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Testing Services Service line

  • Premium

    Aviation and Air Quality Services

    CERC provides consultancy services on aviation and air quality to national and local government, airport operators and consultancies.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM. from Environmental Consultancy Service line

  • Premium

    Analysis and Measurement Services

    We are able to arrange a complex material analysis due to our long-term cooperation with various universities and research institutions. Our products are analyzed mainly by methods mentioned bellow, that are provided by RCPTM (Regional Centre of Advanced Technologies and Materials). There are of course many other methods available.

    By NANO IRON s.r.o. based in Židlochovice, CZECH REPUBLIC.

  • Premium

    ISO-16232 Services

    A comprehensive range of sampling techniques are available within the facility to ensure a deep and thorough representative sample is taken. We have at our disposal a full sweep of processes for flushing, pressure spray, agitation, flow benches, shaker tables, pulsation and aeration processes to provide the optimum solution for each ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Cleaning Services Service line

  • Premium

    Industrial Development Services

    We are developing processes and plants. Therefore we use the Know-how of our scientific partners from universities and research institutes. Together with our experience and flexibility we are able to realize industrial processes fast. With our solutions we offer customer-oriented production concepts, which are characterized by high efficiency, ...

    By BEA Institut für Bioenergie GmbH based in Vienna, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you