Environmental Sampling Equipment

1403 Results found
Only show results in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

TEM 0.45um, 25mm MCE Cassette

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

Designed and manufactured to meet all applicable NIOSH, OSHA, and EPA standards.

Wonder Makers T-Handle and Plunger

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

Attach the Cutter Sleeves to the T-Handle for easy full depth bulk sampling.

EndoFree Endotoxin Vial

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

These sterile, polystyrene, pyrogen-free vials are to be used when sampling water for endotoxins.

Glass Microslides

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

Made with hard, colorless, non-corrosive glass. Slides are precleaned to ensure spotless appearance. In packs of 72.

Slide Boxes

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

Polypropylene box, holds 25 3 inch x 1 inch microslides.

1L Sterile Bottles w/ Sodium Thiosulfate

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

These 1L sterile bottles contain sodium thiosulfate preservative. Used to collect a water sample. Free to EmLab P&K clients with analysis.

250ml Sterile Bottles w/ Sodium Thiosulfate

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

These 250ml sterile bottles contain sodium thiosulfate preservative. Used to collect a water sample. Free to EmLab P&K clients with analysis.

5 Slide Mailer

by EMLab P&K     based in San Bruno, CALIFORNIA (USA)

Empty plastic slide holder which can hold up to 5 glass slides.

sampling valve

by YODSN FLUID EQUIPMENT CO.,LTD     based in WENZHOU, CHINA

Sanitary sample valve Model: welded sample valve, clamped sample valve, threaded sample valve. . . Operation: manual, pneumatic, electric Specification:DIN15-DIN150,1/2'-4', applied to the stainless steel pipeline system Material quality:SUS304, SUS316L Standard:ISO, DIN, IDF, SMS,3A, RJT, AS, BS, BPE Application:pharmacy, beer, food, dairy, ...

Model SSII - Low Pressure Sample System

by Alpha Moisture Systems     based in Bradford, UNITED KINGDOM

Low pressure sample system with sensor operating at maximum inlet pressure up to 28 barg. Exactly as Model SSI but with the sensor operating at inlet line pressure - Maximum 28 barg.

ALTEF - Gas Sampling Bags

by Jensen Inert Products     based in Coral Springs, FLORIDA (USA)

ALTEF is a proprietary fluoropolymer film devel oped specially for the air sampling market.ALTEF meets or exceeds many of the desired characteristics of Tedlar  at a significantly lower cost.

Environmental Scan Sample Collection Kit

by Environmental Testing and Research Laboratories, Inc     based in Leominster, MASSACHUSETTS (USA)

A very inclusive test. Consider this test if you're concerned about industrial / agricultural pollution from either a nearby industry or a landfill or dump. Unauthorized dumping anytime in the past can pollute your water.

Model 3950 - Autosampler

by Knauer-Wissenschaftliche Gerätebau     based in Berlin, GERMANY

The Autosampler 3950 can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 96 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample ...

MICROFLOW - Model alfa - Microbiological Air Sampler

by Aquaria     based in Lacchirarella, ITALY

MICROFLOW alfa has been developed for bio-aerosol sampling in critical places (e.g. clean rooms, food plants, fermentation’s plants etc….). Microflow alfa allows to verify and quantify microorganism presence. In this way you can value the exposure or you can identify the source in order to put in place corrective actions.

Tape Lift Kit (25 pack)

by EMLab P&K     based in South San Francisco, CALIFORNIA (USA)

The Tape Lift Kit is used to take surface samples for mold and microbial contaminants. The easy to use design is perfect for any IAQ Professional.

Tape Lift Kit (10 pack)

by EMLab P&K     based in South San Francisco, CALIFORNIA (USA)

The Tape Lift Kit is used to take surface samples for mold and microbial contaminants. The easy to use design is perfect for any IAQ Professional.

High Volume Pump with Locking Flow Valve Assembly

by EMLab P&K     based in South San Francisco, CALIFORNIA (USA)

The high volume rotary vane pump with locking flow valve is durable and economical with a 1/10 hp motor. With supplied locking valve, users are supplied with a sufficient adjustable flow of 0 LPM - 40 LPM.

Drager - Accuro Deluxe Detector Tube Pump Kit

by Air Concern Limited (ACL)     based in Harwell Didcot, UNITED KINGDOM

Drager Deluxe Detector Tube Pump Kit with accuro hand-held pump with automatic stroke counter, deluxe tube breaker, spare parts kit, tool kit, detector tube handbook, and carry case.

Model 28221-U - DSD-DNPH Diffusive Sampling Device

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

DSD-DNPH Diffusive Sampling Device of pkg of 10 ea.

Environmental Soil Sampling Kits

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

All stainless steel for environmental sampling. Used in soils with low levels of contaminants or where equipment will be cleaned using an acid bath technique. Contains the same components as the basic kit but in all stainless. Includes: Regular, sand and mud augers, cross handle, split soil core sampler, slide hammer, three 4' extensions, plastic ...

Need help finding the right suppliers?

Let the XPRTs do the work for you