Exhaust Gas Monitoring Equipment For Monitoring And Testing
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHTE heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHTE contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the use of optical filters. Selectively measures a wide ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112WP is the wall or panel mount version of our time proven VE112 heated sample filter and interface. Can be mounted in a separate NEMA 4 type housing or the system with all analyzers and sample cooler. With our unique sample back purge system, typically no sample filter at the stack probe is needed. During back purge not only the internal sample filter is cleaned, but also the heated ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power supply/adapter, or an optional Ni-MH rechargeable battery pack, with ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high molecular weight hydrocarbons or condensation of water. The ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 811 M is the next generation in two-channel emissions monitoring instrumentation. Unique in speed and reliability, the nCLD 811 M is modular designed and allows the continuous and simultaneous analysis of NO, NO2 and NOx in raw exhaust gasses with NOx concentrations ranging from several thousand ppm down to a ppb. Its graphical user interface “GUI“ also individually displays ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
At present, daily calibration or zeroing process before vehicle measurement of exhaust gas analyzers in some detection station will use ambient air for zeroing, not completely meeting purity requirement of zero gas(especially for NO detection based on infrared principle, which will exists oisture interference). In addition, some other detection ststions use zero gas for zeroing but the amount is ...
-
PremiumManufactured by Tianjin Zwinsoft Technology Co.,Ltdbased in CHINA
ZPO6 is a wall-mounted gas control panel. This model is mini size,flexible and convenient to install. Support 1-4 channels 4-20MA signal acquisition and with sound and light alarm function. Relying on accurate gas detection and monitoring, the panel can control solenoid valves,exhaust fans, motors, water pumps, sound and light alarms, sprinkler systems, machinery and equipment, etc,to achieve ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you