Only show results available in Virginia? Ok

Flame Detection equipment for Monitoring and Testing

  • Premium

    AEREON - Model CEMs - Sentinel Ultraviolet Flame Monitor

    The Sentinel flame monitor reliably provides remote flame detection up to 550 feet away, durability, ease of maintenance and rapid response time. If the monitor detects the absence of a flame for an adjustable amount of time, a set of dry form C contacts are activated and the pilot re-ignition system is set into motion. Response times are markedly ...

    By AEREON based in Austin, TEXAS (USA). from Combustion Equipment Accessories Product line

  • Premium

    Polaris - Model FID - Portable Flame Ionization Detection Analyzer

    POLARIS FID is an on-site portable TOC Analyser for Stack Emissions in compliance with EN12619, EN13526 and EPA METHOD 25A. It is TÜV Rheinald certified. It is a fully portable instrument because it incorporates everything needed for the analysis.

    By Pollution Analytical Equipment based in Budrio (Bologna), ITALY. from Other Products Product line

  • Premium

    PORTAFID - Model M3K - Portable Flame Ionisation Detector

    Flame ionisation detectors for inspecting underground gas lines. The PORTAFID M3K portable flame ionisation detector is the perfect tool for above-ground inspections of underground gas lines. It is reliable and highly accurate, resistant to interference from moisture and only responds selectively to hydrocarbons. The PORTAFID M3K features an 0.4 l ...

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY. from Gas Leak Detection Outdoors Product line

  • Paragon - Model 105F1-1 - Flame Scanner

    Type 105F1-1 Integrated Flame Scanner and Temperature Analyzer. Paragon scanner provides high integrity sensing of multiple flame properties, including Amplitude, Flicker Frequency and Flame Learned vs. Stored Curve Fitting.

    By Fireye Inc. based in Derry, NEW HAMPSHIRE (USA). from Integrated Flame Detection Product line

  • Model FL10 - Flame Detector Single Channel

    The flame detector FL10 is capable of detecting within a few seconds a flame produced by a fire within its field view. It finds particular application in the places where it is assumed that a fire can develop quickly such example in the stores of petroleum products, paints, plastics, alcohols, etc.. The operating principle is based on the ...

    By EDS Electronic Detection Systems based in San Giovanni Lupatoto, Verona, ITALY.

  • Model FS-24X - Flame Detector

    QuadBand™ Triple IR Fire & Flame Detector - Triple IR + Visible Bands

    By Sensidyne Industrial Health and Safety based in St. Petersburg, FLORIDA (USA). from Fixed Gas Detection Product line

  • Signal - Model 3010 MINIFID - Portable Heated FID THC Analyser

    The 3010 MINIFID is perfect for stack testing.  It has been designed with simplicity and ease of use in mind. With no microprocessor this analyser has been stripped down to the essentials to make it robust and reliable, ready for the rigours of going out on site.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM. from Flame Ionisation Detection (FID) Product line

  • Model FDS300 - Visual Flame Detector

    Designed for hazardous industries where fast optical flame detection is critical and nuisance alarms are not an option! The MICROPACK FDS300 is an explosion proof visual flame detector. It processes live video images to detect the characteristic properties of flames visually, by means of its flame detection algorithms and on-board digital signal ...

    By Micropack Detection based in Fort Collins, COLORADO (USA). from Flame Detection Product line

  • Model FDS101 - Visual Flame Detector

    The MICROPACK FDS101 is the first generation Visual Flame detector capable of outputting a live monochrome video output. MICROPACK no longer manufacture this detector and it is only available to purchase as a spare or for repair. The MICROPACK FDS300 or FDS301 can be purchased as a direct replacement for this unit.

    By Micropack Detection based in Fort Collins, COLORADO (USA). from Obsolete Product line

  • SharpEye - Model 20/20MI- IR (IR3) - Mini Triple Flame Detector

    The 20/20MI is an economical and compact Triple IR (IR3) Flame Detector in a rugged stainless steel housing. It is available in either general purpose non-Ex approved or intrinsically safe approved (EExia) format. It retains all the benefits of IR3 technology - long distance detection (up to 130ft / 40m) along with highest immunity to false ...

    By Desu Systems BV based in Berkel en Rodenrijs, NETHERLANDS. from Flame Detection Product line

  • Flame Ionization Sensors

    Flame Ionization detectors can be extremely accurate and are used to measure concentrations of hydrocarbons and other solvents within a gas. They are detected by burning them in an air-hydrogen flame - which creates high and precisely measurable levels of Ionization. The ionization occurs as a result of heating the carbon atoms present in the ...

    By Versaperm Limited based in Maidenhead, UNITED KINGDOM. from Hydrogen Sensors Product line

  • Model EZ - Flame Detection System

    A truly advanced and user friendly flame detection system engineered for critical safety functions in the Power Generation, Petrochemical, Metallurgy, and Pulp & Paper industries. Dual channel capabilities for IR, UV, or a combination UV and IR flame scanners provide flexibility to our customers. Each channel on the amplifier can store two ...

    By Safe-Fire Inc. based in Irwindale, CALIFORNIA (USA). from Flame Detection Product line

  • Model ZN002A - Three Zone Control Module

    The ZN002A is a Zone Control Module for the Zero Two Series Fire and Gas Detection System. The ZN002A provides zoning and voting functions for three separate and independent zones of gas and / or flame detection.

    By General Monitors based in Lake Forest, CALIFORNIA (USA). from Fire and Gas Detection Systems Product line

  • Model CC02A Serial - Communications Module

    The CC02A Communications Card facilitates serial communications between each module in a Zero Two Series Flame and Gas Detection System and an external host computer, which allows fast access to operational and setup data registers. It supports a Burst Read feature that returns all registers of a module in a single transmission.

    By General Monitors based in Lake Forest, CALIFORNIA (USA). from Fire and Gas Detection Systems Product line

  • Mitsubishi Hitachi Power Systems - Model IR-S - Infrared Flame Detector: Control Systems

    Recently, due to diversified boiler fuels and low NOx (nitrogen oxide) operation, it is becoming difficult to monitor a burner flame using the conventionalultraviolet or infrared light detection methods. Based on this change in the business environment, MHPS has improved on the conventional IR type flame detector to create a new type of flame ...

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA).

  • Flame Ionization Detectors (FID)

    In gas chromatographic analyses flame ionization detectors (FID), thermal conductivity detectors (TCD) or mass spectrometers (MSD) are often used for compound detection. In olfactory analysis, the human nose is used as additional detector. The JAS Olfactometer is a sniff detector for gas chromatography. It allows the operatur to use his human nose ...

    By Joint Analytical Systems Inc based in Newark, DELAWARE (USA). from Detectors Product line

  • Systems & Controllers - MDXI

    This modular controller covers most systems from 5 to 100 channels. Combined with the full Simtronics range of gas and flame detectors, the MDXI forms a basis for reliable alarm collection and easy maintenance.

    By Simtronics SAS based in Aubagne Cedex, FRANCE.

  • Fike - Model FSM-IP - Network Video Smoke and Flame Detection Recorder

    A scalable, network video recorder with video management software, each FSM-IP is designed to support up to 32 SigniFire IP network, flame detecting cameras: Constantly records video streams onto internal hard disk. Customizable storage space to meet application needs. Provides monitoring of live videos. With the scalable FSM-IP, multiple servers ...

    By Fike Corporation based in Blue Springs, MISSOURI (USA). from Fire Alarm Systems Product line

  • Model FL3100H - UV/IR Flame Detector

    The Model FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. Configurations with dual Modbus ...

    By General Monitors based in Lake Forest, CALIFORNIA (USA). from Flame Detectors Product line

  • FL3112 DFIR-Detector - Model FL3111HT

    General Monitors’ Model FL3111HT is a high temperature rated UV-only flame detector designed to detect unwanted fires while maintaining false alarm immunity. The FL3111HT detects in only the ultraviolet (UV) spectral range for optimized speed of response. The detector can withstand ambient temperatures up to 125°C maximum. This is achieved by the ...

    By Bernt Messtechnik GmbH based in Düsseldorf, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you