Only show results available in Virginia? Ok

Gas Calibration services for Monitoring and Testing

  • Premium

    Factory Calibration Services

    We know your LumaSense equipment plays a critical role on your process and research.  Precision is imperative so we’ve established a fully equipped, expertly staffed laboratory for performing calibrations that meet national standards on all makes (MIKRON, IMPAC, E2T, Avio, LUXTRON, SmartDGA®, INNOVA, and ANDROS) of LumaSense ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Factory Service Service line

  • calibration gas - calibration gas

    calibration gas

    By AG Gases Ltd based in Stoke-on-Trent, UNITED KINGDOM.

  • LEL Calibration

    In recent generations of press designs, gas monitors are installed to constantly monitor solvent levels within dryers and exhaust ductwork. If not already installed, then we would install them as part of the optimisation process. The solvent is measured as a function of safety as %LEL (a percentage of the lower explosive limit) normally using ...

    By EPM - Environmental Project Management (Contracts) Ltd based in Bardsey, UNITED KINGDOM.

  • Calibration Laboratory Service

    In 2004, the calibration laboratoty at CERTIO MEDIO AMBIENTE obtained the ENAC (National Accreditation Entity) accreditation and number 151/LC397, according to the criteria described in Norm UNE-EN ISO/IEC 17025:2000 (CGA-ENAC-LEC), for the performance of Calibrations in the Area of 'Chemistry: Gas Concentrations, Category 0 (Calibrations in ...

    By CERTIO MEDIO AMBIENTE, S.L. based in Tres Cantos, SPAIN.

  • Personal Gas Detectors Calibration & Service

    Calibration and Service of your personal gas monitors and detectors is a key activity to ensure your units comply with legislation and regulations. Manufacturers of Gas monitors recommend that these meters are calibrated every 6 months to ensure the integrity of the sensors and confirm that the personal gas detector will alarm in the event of a ...

    By Point Safety Ltd based in UNITED KINGDOM.

  • Check of Calibration/ Re-Calibration at Site / in Ulm

    In general, gas flow meter of the COMBIMASS series are not subjected to wear and tear. It can be useful under some circumstances (e.g. installation in corrosive/abrasive gas media) or if the nature of the project requires from time to time some check (e.g. CDM, high requirements on accuracy, etc), calibration of the flow sensors can be checked ...

    By Binder Group GmbH based in Ulm, GERMANY.

  • Service and Repair - Calibration Service

    Calibration and servicing of gas detection equipment is an essential part of any safety assures deportation. Without regular maintenance and calibration the performance of you requirement is in question, this uncertainty impacts directly on individuals and safe systems of work. With manufacture approved service and calibration facilities and ...

    By CitiSafe Pte Ltd based in Singapore, SINGAPORE.

  • Fixed Gas Detection System Servicing

    Frontline Safety has industry specialists on hand committed to providing exceptional customer service and support throughout the UK. Calibration and maintenance needs can be tailored to specifically meet the demands of our customers. Routine maintenance is essential to ensure optimum performance, reliability and extended operational life.We can ...

    By Frontline Safety (UK) Ltd. based in Glasgow, UNITED KINGDOM.

  • Portable Gas Detector Calibration Services

    In order to ensure the safe and accurate operation of Portable Gas Detectors, they need to be periodically calibrated against reference test gases that are traceable to National Physical Laboratory standards. The recommended calibration period for most gas detectors is six months although the frequency may need to be increased where continual ...

    By Frontline Safety (UK) Ltd. based in Glasgow, UNITED KINGDOM.

  • RAE Systems - Calibration and Repair Services

    Enviro-Equipment is a factory authorized RAE Systems service center. We offer repair and calibration services for RAE Systems gas detection and organic vapor analyzers. Services include diagnosis, repair, and final testing of equipment, zero and span calibrations with calibration records, firmware updates (if applicable), filter and pump ...

    By Enviro-Equipment, Inc. based in Pineville, NORTH CAROLINA (USA).

  • Gas Detection

    Our Fixed Gas Detection Systems include robust industrial field detectors running the most reliable technologies to detect all Toxic, Flammable and Oxygen depleting gas hazards. These detectors are coupled with a broad range of gas detection controllers to provide full monitoring, alarming and control functionality scaled to suit our customers ...

    By Eolas Technology based in Perth, UNITED KINGDOM.

  • Repair/Maintenance Service

    Detector Oy evaluates the need of and performs the service and calibration of the gas detection instruments which the customers send to the factory, services and calibrates the portable detectors and does service on the gas detection systems on site upon the customers’ request.

    By DETECTOR OY based in Turku, FINLAND.

  • Technical Support

    The PeGASyS system incorporates the latest technology in portable gas chromatography, gas sampling and computer hardware. Because it is portable, the system can be easily transported to the plant site and quickly set up in an area as small as a desktop. The PeGASyS system analyzes the SO2 and O2 converter gas streams, detects leaks in gas-to-gas ...

    By MECS, Inc based in Chesterfield, MISSOURI (USA).

  • Repair & Calibration Services

    At MKS we understand that establishing a consistent regular calibration program for your gas pressure and flow instrument is critical to ensuring repeatable processes within a tool, between tools in the same facility, between tools in duplicate facilities, and when transferring processes from R&D to production. Ensuring instrument calibrations ...

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Flow Meter Calibration Services

    SmartmeasurementTM is happy to announce that we have improved our flow calibration services.  We can provide fully-accredited flow meter calibration traceable to National Institute and Technology (NIST) for our own manufactured liquid and/or gas flow meters as well as other flow manufacturers.  Periodic recalibrations are often need to ...

    By SmartMeasurement based in Wauwatosa, WISCONSIN (USA).

  • UKAS Calibration Services

    Chell’s BS/EN/ISO/IEC 17025 accredited Calibration Laboratory provides a comprehensive service for Vacuum, pneumatic Pressure and Gas Flow measuring, controlling and generating instrumentation. Our calibration standards have been developed to provide a service having some of the lowest uncertainties in their fields, providing our customers ...

    By Chell Instruments Ltd. based in North Walsham, UNITED KINGDOM.

  • Calibration

    We offer a full line of calibration services in our laboratory, as well as in-field calibrations. Our capabilities include calibration gas cylinders, NIST traceable gas generation and full service field calibration.

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Thoron Calibration Services

    The RAD7 is able to measure both radon (222-Rn) and thoron (220-Rn) concentrations simultaneously and independently. The standard radon calibration is performed with a precision of better than 1% and we guarantee the RAD7 absolute accuracy for radon to be better than 5%. However thoron has a very short half life (about one minute) so that the ...

    By Durridge Company, Inc. based in Billerica, MASSACHUSETTS (USA).

  • Flow Dynamics - Flow Meter Calibration Services

    Among the world’s elite flow calibration facilities, the Badger Meter Flow Dynamics primary and secondary standard calibration laboratories, located in Scottsdale, AZ, calibrate most flow meters from any manufacturer. The Flow Dynamics primary standard calibration facility offers superior liquid and gas calibration uncertainties, as ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA).

  • Gas Detection Equipment Service

    With over 30 years experience working with industry consultants to meet all gas detection requirements, we are the market leaders in our field. At Control Equipment, technical service support for every available instrument and system has always been mandatory for us. Our Service Engineers have been recruited from among highly experienced ...

    By Control Equipment Pty Ltd based in Brendale, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you