Gas Sensors services for Monitoring and Testing

We know your LumaSense equipment plays a critical role on your process and research.  Precision is imperative so we’ve established a fully equipped, expertly staffed laboratory for performing calibrations that meet national standards on all makes (MIKRON, IMPAC, E2T, LUXTRON, SmartDGA®, INNOVA, and ANDROS) of LumaSense infrared ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Factory Service Service line

The value of a gas detection system is greater than ensuring ongoing regulatory compliance. Today's gas detection systems are an intrinsic part of a building’s overall safety and energy management strategy. Your gas detection system requires periodic verification and calibration. The EZ Cal Sensor Exchange Program takes the work out of the ...

By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).

Where highly flammable gases are involved the human and environmental safety are extremely important. The often extreme operating conditions in the gas industry make the need for explosion suppression indispensable. In order to ensure the safe and effi cient operation of these systems, high-precision pressure transmitters that you can rely on are ...

By STS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND.

Calibration and Service of your personal gas monitors and detectors is a key activity to ensure your units comply with legislation and regulations. Manufacturers of Gas monitors recommend that these meters are calibrated every 6 months to ensure the integrity of the sensors and confirm that the personal gas detector will alarm in the event of a ...

By Point Safety Ltd based in UNITED KINGDOM.

Hydrogen Fluoride (HF) is a colorless gas that is used extensively in industrial applications. Fluoride monitoring is especially needed for aluminum plants that need to convert HF into fluorine for use in their processes. Any HF that escapes is a cost to the plant, so an HF analyzer / fluoride analyzer for fluoride monitoring is essential to ...

By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

In recent generations of press designs, gas monitors are installed to constantly monitor solvent levels within dryers and exhaust ductwork. If not already installed, then we would install them as part of the optimisation process. The solvent is measured as a function of safety as %LEL (a percentage of the lower explosive limit) normally using ...

By EPM - Environmental Project Management (Contracts) Ltd based in Bardsey, UNITED KINGDOM.

Our Team of experts in Air Analytics, from gas to odors, from nuisances to wellness, from laboratory to fields is at your service. We have more than 100 man years of experience in Air monitoring, experience in gas sensors, VOC & Odors, Particles analysis and Nuisances monitoring and we can help you in designing your waste processing plant or ...

By RubiX S & I SAS based in Toulouse, FRANCE.

Look to Total Safety for expert Design and Installation Services, as well as procurement, project management, testing and commissioning, for systems that protect your workers, facility, equipment, environment and community, ensuring the continuity of your operations.

By Total Safety based in Houston, TEXAS (USA). from Services Service line

Hy-Bon provides VOC, GHG and HAP solutions by identifying, reporting and recovering fugitive emissions.

By HY-BON/EDI based in Midland, TEXAS (USA).

All Ozone Sensors will require periodic calibration to ensure your gas measurements are accurate and correct.  Different ozone sensor manufacturers will have differing requirements and methods for calibration.  This page will serve to provide general calibration information and links to specific calibration procedures from the sensor ...

By Oxidation Technologies, LLC based in Inwood, IOWA (USA).

The importance of calibration with using electro-chemical cells for measuring toxic gas is that their working life is determined by the activity of the electrodes used to detect the gas. This activity is gradually reduced over time by contaminant gases and poisons such that the sensor sensitivity is the amount of current generated per ppm of ...

By PPM Technology based in Caernarfon, UNITED KINGDOM.

CH4 / Methane is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. ...

By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

Sensor Sense performs custom gas detection projects. In stead of buying a new machine we can take away your concerns of gas detection by analyzing your samples in our lab. You can concentrate yourself on your core business, the gas detection results will be provides at your desk.

By Sensor Sense B.V. based in Nijmegen, NETHERLANDS.

Development and application of sensor systems, e.g. FTIR and laser spectroscopy for process optimization in collaboration with research institutes and universities. Development of safety concepts and system analyses. Calculation, layout and optimization of gas and chemistry supply systems. Layout and documentation using Auto CAD and Solid Works. ...

By Sempa Systems GmbH based in Dresden, GERMANY.

QEL’s highly-trained, factory-certified technicians have years of experience helping our customers protect life, property, and the environment. System commissioning, routine on-site calibration, and regular functional testing are all essential service requirements of any gas detection system.

By Quatrosense Environmental Ltd. (QEL) based in Richmond, ONTARIO (CANADA).

Norditech provides a full in-house maintenance, repair and calibration service for all of your monitoring equipment needs, with a guaranteed quick turn-around time.

By Norditech Pty Ltd based in Arndell Park, AUSTRALIA.

With Concept Controls, your equipment is back up to manufacturer’s specifications in less than a week. Make Concept Controls your partner for calibration and maintenance. A quick call is all you need to arrange your calibration service. We’ll direct you to send it to the location closest to you.

By Concept Controls Inc based in La Porte, TEXAS (USA).

Rel-Tek's premier on-site service program for your EZ-Trol/DX Gas Monitoring SystemYou have invested in an excellent gas monitoring system (GMS), and it deserves to be properly maintained. Our 'Q-Star' service program provides continuing factory support. Quarterly visits are made to your plant by one of Rel-Tek's service specialists to help keep ...

By Rel-Tek Corporation based in Monroeville, PENNSYLVANIA (USA).

Our electronic engineers, our chemists and data processing specialists can customize our miniaturized sensors arrays boards or electronic nose to your needs.

By RubiX S & I SAS based in Toulouse, FRANCE.

DirectCIH monitors ambient air to measure many fugitive chemical compounds from pipelines and sewers. Oxygen, carbon monoxide, and combustible gas sensors are combined with state-of-the-art, real time, on-site sampling and analytical technologies. To identify leaks or suspect locations, very low levels of Methane, propane, and butane, Hydrogen ...

By DirectCIH based in Pell City, ALABAMA (USA). from Incident Response Service line