Only show results available in Massachusetts? Ok

Gravimetric Analysis services for Monitoring and Testing

  • SCR Catalyst Testing Services

    Selective Catalytic Reduction (SCR) catalysts deactivate over time and must be actively managed to ensure reliable plant emissions performance. Catalyst testing is the most reliable way to determine when your SCR catalyst will no longer be able to provide the required NOx conversion performance. Each catalyst is a custom-engineered product that takes several months to design, engineer, ...

    By Environex, Inc. based in Malvern, PENNSYLVANIA (USA). from Industrial Catalyst Services Service line

  • Laboratory Services

    J-PECO has a Collaboration Laboratory with renowned university and it is used for the Material Department doing material tests. This laboratory has metal materials test room, inorganic non-metallic test room, materials physics and microstructure room, electronic microscopy room, X-ray diffraction analysis room, etc. Our Collaboration Laboratory has experimental rooms with an area of 820 square ...

  • Laboratory Services

    Our technical laboratories are located in Houston, Texas and Sacramento, California and offer a wide range of chemical and microbiological testing services. Our laboratories are staffed with degreed, trained and experienced microbiologists and chemists who perform a variety of tests to support fire investigations, indoor air quality (IAQ) assessments, mold evaluations and failure analysis. We ...

    By EFI Global, Inc. based in Humble, TEXAS (USA). from Specialty and Consulting Service line

  • Mold Inspection & Testing Services

    Our Mold Department provides both viable and non-viable analysis supervised by a PhD Microbiologist. We offer turnaround times from 5 days to same-day service, as well as weekend analysis for non-viables. MVOC analysis is also available (see IH Chemistry). We can also create custom reports that are available online or via ...

    By Materials Analytical Services, LLC (MAS) based in Suwanee, GEORGIA (US) (USA).

  • Environment Studies

    Environmental Impact Assessment studies (EIA), Comprehensive Environment Impact assessment (CEIA), Environment Management Plan (EMP), Disaster Management Plan (DMP), Carrying Capacity Studies, Regional Environmental Impact Assessment studies (REIA), Hydrogeological Studies, Air Quality modeling, Meteorological studies, Environmental Liability studies, Energy Audits, Environmental Audit, Risk ...

    By Bhagavathi Ana Labs Limited based in Banjara Hills, Hyderabad, INDIA.

  • Intercarat - Certified Quality Management Services

    To ensure that only high-quality and reliable precision parts are supplied at all times, our employees carry out numerous analyses and tests during the entire development and production process. At Intercarat, it goes without saying that this also includes a final inspection with full visual inspection as an integral part of our certification in accordance with ISO ...

    By Intercarat based in Duppigheim, FRANCE.

  • PM10 Sampling

    We have just begun to look at the technology of PM 10 sampling, so we do not claim to be ...

    By DustWatch cc based in Sun Valley, SOUTH AFRICA.

  • Helium Diffusion Sampling Services

    The HDS Personal Monitor simplifies the monitoring of chemicals in the workplace. A breakthrough new technology based on helium diffusion yields a sampler that is small, light weight, cost-effective, universal, and defensible. Above all, the HDS Personal Monitor delivers highly reproducible results unaffected by factors that create errors in other diffusive samplers such as matrix concentrations, ...

    By A&B Environmental Services, Inc (A&B Labs) based in Houston, TEXAS (USA). from Analytical Services Service line

  • Testing & Analysis Service

    We work closely with our customers on all aspects of seal testing and development programs. All testing procedures are carried out to international standards, BS ISO, DIN, ASTM, or to customer specific requirements. We offer a diverse range of compounds to satisfy the majority of market needs. If a customer has a specific need that cannot be met within our existing elastomer range, we will ...

    By Superior Seals Limited based in Wimborne, UNITED KINGDOM.

  • Gravimetric Impactor Calibration Services

    Proper operation of Dekati Gravimetric Impactors can be ensured by following the maintenance and service instructions given in the user manuals of the instruments. If further verification of the instrument operation is needed, we can provide maintenance and calibration services for the Dekati® Impactors. All Dekati® Impactor calibration services are performed at Dekati ...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Chemistry Laboratory Services

    EFI Global maintains two chemical laboratories providing a full range of material and chemical testing. Both laboratories are fully equipped with state-of-the-art instruments and experienced chemists specializing in analysis of forensic fire debris, natural gas, liquefied petroleum gas (LPG) and polymers. Our chemistry personnel are degreed professionals with expert witness testimony experience ...

    By EFI Global, Inc. based in Humble, TEXAS (USA). from Specialty and Consulting Service line

  • Analytical Services

    eSpin provides independent analytical laboratory testing services with specialization in characterization of nanofibers for industrial and academic researchers. We have state-of-the-art laboratories and instruments to evaluate your ...

    By eSpin Technologies, Inc based in Chattanooga, TENNESSEE (USA).

  • Gravimetric Dust Monitoring

    The gravimetric sampling of dust of an airborne nature is not only the internationally acceptable method of determining dust concentrations but is in general use in South Africa. While the Department of labour advocates the sampling method, they do not have their own sampling guidelines or established method and use that devised by the Department of Minerals and Energy whenever dust of an ore or ...

    By DustWatch cc based in Sun Valley, SOUTH AFRICA.

  • Analytical Services

    Specialized analytical testing demands a balance of experienced personnel and state-of-the-art instrumentation. The Analytical Services Laboratories of INDSPEC are staffed by knowledgeable scientists skilled in solving difficult industrial problems requiring chemical and/or physical testing. The personnel of INDSPEC Chemical Analytical Services Group have more than 70 combined years of analytical ...

    By Occidental Petroleum Corporation based in Houston, TEXAS (USA).

  • Polymer Testing Services

    Polymer analysis employs both physical and analytical methods to verify the chemical, mechanical, and thermal properties of a polymeric material. These properties are instrumental in making sure that the polymer part will perform as required by the end user. For example, we can verify if the parts are the proper material using FT-IR, check for contamination using DSC and then determine if the ...

    By Applied Technical Services Inc (ATS) based in Marietta, GEORGIA (US) (USA).

  • Silicone Testing Services

    Silicones can be challenging to analyze. Dow Corning’s ability to develop new products and modify existing ones is based in part upon our silicone analytical expertise and advanced instrumentation. Our analytical group has been characterizing silicon based materials for over 65 years and literally “wrote the book” on analyzing silicones: The Analytical Chemistry of Silicones. ...

    By Dow Corning Corporation based in Auburn, MICHIGAN (USA).

  • Occupational & Hygiene Audits

    With the many changes and revisions taking place in the draft documentation being prepared to complement the Mine Health and Safety Act, we feel that a general comment in this regard as well as a look at the specific issues is ...

    By DustWatch cc based in Sun Valley, SOUTH AFRICA.

  • Analytical Laboratory Evaluations Services

    EmeraChem uses sophisticated laboratory analyses to characterize the chemical and physical properties of a catalyst. These analyses are an essential part of new catalyst development and routine process control measurements within the manufacturing ...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Physical Characterization Services

    R&D Applications: Crystal structure determination by powder X-ray diffraction. Polymorph screening. Patent investigation and ...

    By Activation Laboratories Ltd. based in Ancaster, ONTARIO (CANADA). from Pharmaceutical Services Service line

  • Polymer Lab Instrumentation Services

    Whether you require, physical, mechanical, thermal, or elemental analysis of your polymer and composites, NSL relies on the latest instrumentation and analytical techniques to deliver accurate and reliable results ...

    By NSL Analytical Services, Inc. based in Cleveland, OHIO (USA). from Polymer Lab Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you