Only show results available in Virginia? Ok

Ion Analyses services for Monitoring and Testing

  • Analytical Services

    Electrical Failure Analysis, Metallurgical Failure Analysis, Hot Spot Detection, Emission Microscopy, Voltage Contrast, Electrostatic Discharge Sensitivity Test (ESD), Latchup Evaluation, Dielectric Integrity Tests, Decoration Techniques, Optical Microscopy, Optical Beam Induced Current (OBIC), Scanning Electron Microscopy (SEM), Electron Beam ...

    By Riga Analytical Lab based in Santa Clara, CALIFORNIA (USA).

  • Drinking water testing

    The recommended guideline maximum of 500 mg/L is based on taste. Generally water with less than 500 mg/L is regarded as good quality water but values of up to 1000 mg/L can be tolerated. Corrosion may also become a problem with high TDS levels. There are no health effects associated with high TDS but the components which make up the TDS may cause ...

    By MPL Health Safety Environment based in AUSTRALIA.

  • Small Business and Lettings

    Water analysis for small business: At Water Hygiene Systems we offer the small business the same service as major corporates with a simple testing and analysis service which is quick and thorough. As I am sure you are aware, a Risk Assessment is a statutory requirement under the Health and Safety at Work Act 1974, Sections 2, 3, & 4; COSHH ...

    By Water Hygiene Systems Ltd (WHS) based in High Wycombe, UNITED KINGDOM.

  • Development & Pilot Plants Services

    Up to now Bucher Processtech AG has applied for over 1700 letters of patent. This is a result of the strong force of innovation of our company.In our laboratory in Niederweningen, Switzerland, we are able to perform different process engineering trials i. e. for new applications of our products. From disintegration, pressing, filtration up to ...

    By Bucher Unipektin AG based in Niederweningen, SWITZERLAND.

  • Pilot Testing

    Sometimes there are distinct advantages to running a two week to a six month trial of small scale water treatment equipment to collect data and document the performance of the system proposed for full scale implementation.  This is particularly true when water contaminants change because of production variables, season, process upsets, and ...

    By WaterProfessionals based in Fletcher,, NORTH CAROLINA (USA). from Wastewater Treatment Services Service line

  • Quality Control Services

    Regis' quality control (QC) department evaluates product integrity while allowing instant troubleshooting for our production staff. We run two shifts of QC chemists to support the two shift production schedule. This guarantees quicker turnaround and better allocation of resources.

    By Regis Technologies Inc based in Morton Grove, ILLINOIS (USA).

  • Ion Chromatography Based Analysis Services

    Ion Chromatography at Creative-Proteomics supports your research in the identification and quantitation of both organic and inorganic ions ranging from conventional pharmaceutical industries to cosmetic industries. Ion Chromatography (IC) based analysis Service at Creative-Proteomics

    By Creative Proteomics based in Shirley, NEW YORK (USA). from Technical - Analytical Service Service line

  • Liquid Chromatography (LC) Based Analysis Services

    Liquid Chromatography (LC) is a form of chromatography that allows separation of complex mixtures of both semi- and non-volatile compounds based on slight differences in solubility between chemicals. This technique is a complementary to GC but effective when the compounds of interest are not volatile or are thermally labile. Liquid ...

    By Creative Proteomics based in Shirley, NEW YORK (USA). from Technical - Analytical Service Service line

  • Analytical Services

    Custom Stack Analysis, LLC., has a qualified staff to perform several in-house analytical services.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Salt Analytics and Mineralogy Services

    We can offer many years of experience and expert knowledge in: the analysis of all types of salt containing samples, the examination of various components from main constituents to trace elements, the calculation of ion balances and mineral constitution, the evaluation of results according to the requirement profile of the samples, support in all ...

    By K-UTEC AG Salt Technologies based in Sondershausen, GERMANY. from Provided Service of Physico-Chemical Analytics Service line

  • Interstitial Gases Sampling Services

    The sampling of interstitial gases (soil atmosphere) is usually performed in contaminated areas to evaluate the migration of gas in not-saturated medium. This method represents an interesting screening technique to test the presence and the level of  possible volatile compounds contamination in soil. In fact, the Attachment n. 2 of D.M. ...

    By Theolab SpA based in Volpiano, ITALY.

  • ILW & LLW Consulting & Laboratory Studies

    Tradebe Inutec’s medium/high active laboratories are a purpose-designed facility, extremely flexible and can be readily tailored to fit customer requirements.

    By Inutec based in Dorchester, UNITED KINGDOM. from Capabilities Service line

  • SGS - Surface Coating Testing Services

    Surface coating testing from SGS – ensure your coating systems provide the performance you need.When selecting a coating system to protect steel or concrete surfaces, you need to ensure that it will perform well over time in any given environment. Making the wrong decision can mean coating failures with costs that far outweigh your initial ...

    By SGS North America Inc based in Rutherford, NEW JERSEY (USA). from Construction Service line

  • Chromium Speciation (Cr)

    Chromium (Cr) is a polyvalent element and can exist in several distinct oxidation states, but only trivalent chromium [Cr(III)] and hexavalent chromium [Cr(VI)] occur with any frequency in the natural environment. The mobility, bioavailability, and toxicity of chromium largely depend on which of these two chemical species is prevalent. The ...

    By Brooks Applied Labs based in Bothell, WASHINGTON (USA). from Trace Elements Speciation Service line

  • OEM Design Services

    Aries FilterWorks is your single source for water filtration OEM design and turnkey systems.  Aries FilterWorks products are designed and manufactured using the latest technologies and premium media from ResinTech,Inc. A variety of welding, filling and molding machinery ensure complete control over the manufacturing process. ...

    By ARIES Filter Works - A Division of Resintech, Inc based in West Berlin, NEW JERSEY (USA).

  • Corrosion Evaluation Services

    Corrosion of metals is a costly problem that is often caused by environmental or chemical contamination. Constellation has extensive resources for the evaluation of corrosion residues; the first step in determining the source of the corrosion and determining possible solutions. Localized corrosion on the surface of components can be evaluated ...

    By Constellation Technology Corporation based in Largo, FLORIDA (USA). from Chemical Analysis Service line

  • New Product Development & Testing Services

    WSM offers state-of-the-art knowledge of product and water treatment product design using oxidation, disinfection, filtration, reverse osmosis and other membranes, adsorption, ion exchange technologies and functional control systems. We supplement this expertise with realistic costing, component sourcing and assembly feasibility analysis. WSM ...

    By Water Think Tank based in Cedar, MINNESOTA (USA).

  • Special Inspection and Material Testing Services

    American Engineering Testing, Inc. (AET) provides comprehensive material testing services to monitor quality control on construction projects. These services include laboratory and field testing of soil, concrete, steel, masonry, asphalt, aggregate, and building stone materials.

    By American Engineering Testing Inc. based in Saint Paul, MINNESOTA (USA). from Materials Services Service line

  • Laboratory Services

    Laboratory service assesses the suitability of new plants for day-to-day use. Antech-Gütling has its own laboratory service to ensure already in the conceptual stage, that wastewater and process water plants are perfectly adapted to the operational requirements of customers. This is where chemists and engineers work to find a suitable ...

    By Antech G├╝tling Wassertechnologie GmbH based in Fellbach, GERMANY.

  • Ion Exchange System Aftermarket Services

    Parts for newterra Brands & Other Makes: Inlet distributors, Underdrains, Pressure & flow switches, Controls/control upgrades,  Eductors, Chemical pumps, pH meters/analyzers, Neutralization skids & replacement tanks for softeners, dealkalizers, demineralizers & condensate polishers.

    By Newterra based in Toronto, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you