Laboratory Gas Generators Articles

  • LGD F200 - Designed for easy zeroing and span adjustments

    Regular zeroing and span adjustments to gas analyzers in the field are suggested and required for a variety of reasons. Compliance to environmental standards, e.g. those outlined in the US EPA (40 CFR) or EN 14181 is an important factor. Special application conditions, e.g. a varying gas matrix or compensating for pressure effects can be additional reasons, where a zeroing and span adjustment ...


    By Axetris Ag

  • Nitrogen Demand Increases for Semiconductor: How Safe Are You?

    As users demand ever-smaller smartphones and better televisions, semiconductor manufacturing plants are tasked with developing new products faster and using new materials. Key to the continued success of the semiconductor industry are inert gases, which include nitrogen and argon. When used safely, both nitrogen and argon play a number of important roles within the semiconductor ...

  • Are You An OLED Display Manufacturer? Why PureAire Monitoring Systems May Be Your Next Partner

    OLED -- organic LED -- is a top desired feature in smartphones, yet manufacturers do not have the production capacity needed to meet industry demands. Since OLED devices have stronger contrast, a faster response time, a better quality, and a lower cost, there are many reasons for consumers as well as ...

  • Xylem unveils fifth generation HYDROVAR

    Highly efficient variable speed drive reduces energy consumption Xylem, a global water technology leader, has released the fifth generation HYDROVAR, an intelligent pump controller that accurately adapts to system demands, helping end users realize cost and energy savings while achieving optimum system performance. The new drive can reduce energy consumption of a pump by as much as 70 ...

  • All in One Unit for GC Applications

    Leman Instruments is a leading European company, specialised in standard products, OEMs and in custom designed realisations involving high purity H2, N2, zero air, combined solutions for FIDs, GCs, purge air generators, CH4 & CO2 scrubbers, N2 and multigas for LCMS with high level of communications involving Ethernet, USB, RS 485 and ...


    By Leman Instruments SAS

  • Monitoring the purity of nitrogen in cryogenic air separation plants - Case Study

    In the manufacturing of the containerised plants, Linde Cryoplants Ltd utilise the Systech Illinois EC923 trace oxygen analyser to monitor the purity of the nitrogen. With 125 years of experience and expertise in the field of cryogenics, Linde Cryoplants is a leading manufacturer of air separation plants. Their compact Nitrogen and Oxygen generators provide custom-made and standard supply ...


    By Systech Instruments Ltd

  • The Path to Safety for Pharmaceutical and Laboratories: Why O2 Deficiency Monitors May be Required?

    To safeguard against gas leaks in pharmaceutical industries and laboratories, businesses are turning to oxygen deficiency monitors. Learn when, where, and why an oxygen monitor or O2 monitor may be required.  Oxygen Monitors in Medical and Pharmaceutical Settings In the hospital setting, nitrogen gas is ...

  • Case Study: Replacing Natural Gas For Industry

    Renewable Energy Systems Offset Fossil Fuels with Sustainable Fuel Supply PHG Energy’s patented downdraft gasification systems were first deployed for for Boral Brick Manufacturing at facilities in Alabama, Georgia and Tennessee. The technology was used to offset natural gas costs, which were then consistently topping $10 per decatherm. Twelve of the 8-ton/day gasifiers were ...


    By PHG Energy, LLC

  • VIYELLATEX improves factory efficiency thanks to cogeneration with gas engines

    VIYELLATEX Limited is the composite knit apparel and textile manufacturing business unit of VIYELLATEX group. It started its operations in 1996. The company is comprised of design and product development, sample, knitting, washing, cutting, sewing and finishing sections. The Textile Testing Corporation (Testing Lab) is also a part of VIYELLATEX. It caters to major buyers such as Puma, S.Oliver, ...


    By Clarke Energy

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Ammonia nitrogen removal from acetylene purification wastewater from a PVC plant by struvite precipitation

    Acetylene purification wastewater (APW) usually contains high concentrations of ammonia nitrogen (NH4-N), which is generated during the production of acetylene in a polyvinylchloride manufacturing plant. In this study, a struvite precipitation method was selected to remove NH4-N from the APW. Laboratory-scale batch experiments were performed to investigate the effects of the initial APW ...


    By IWA Publishing

  • IberWQ: new simulation tool for 2D water quality modelling in rivers and shallow estuaries

    This paper presents a new freeware simulation tool (IberWQ) for 2D water quality modelling in rivers and non-stratified estuaries. The model computes the spatial and temporal evolution of several species and variables which are relevant for the evaluation of the environmental status of rivers and estuaries, including: Escherichia coli, dissolved oxygen, carbonaceous biochemical oxygen demand, ...


    By IWA Publishing

  • Nanoscale zero-valent iron incorporated with nanomagnetic diatomite for catalytic degradation of methylene blue in heterogeneous Fenton system

    Nanoscale zero-valent iron (nZVI) incorporated with nanomagnetic diatomite (DE) composite material was prepared for catalytic degradation of methylene blue (MB) in heterogeneous Fenton system. The material was constructed by two facile steps: Fe3O4 magnetic nanoparticles were supported on DE by chemical co-precipitation method, after which nZVI was incorporated into magnetic DE by ...


    By IWA Publishing

  • Case study - Pemaco superfund site remediation

    OVERVIEW Pemaco was formerly a chemical facility located in a light industrial and residential area of Maywood, CA, adjacent to the Los Angeles River. No one knows how long hazardous substances had been leaking into the ground but the operations date back to the 1940's.  Up until closure of the facility in 1991, chlorinated solvents, aromatic solvents, and flammable liquids had ...

  • Car emissions: taking tests out of the lab and onto the road

    Every year 430,000 Europeans die prematurely due to air pollution. One of the main sources is road vehicles emitting nitrogen oxides (NOx), including poisonous nitrogen dioxide. Following the Volkswagen scandal, in which the company admitted cheating emission test in the US, Parliament and the Council are considering to update existing emission rules to ensure tests are closer to real driving ...


    By European Parliament

  • Nitrogen Generators: Where are they Installed and How to Stay Safe?

    Used in a range of industries, nitrogen generators ensure a steady supply of 99.5% pure, commercially sterile nitrogen from a compressed air storage tank. From an industrial standpoint, nitrogen generators are seen as preferable to cylinders of nitrogen as they are more reliable, more compact, and easy to use and install. However, these generators ...

  • Additive Manufacturing 3D Printing

    3D printing is officially skyrocketing, with industrial applications in medical, biotech, aerospace, defense, and consumer electronics industries growing daily. At the heart of this acceleration is the additive manufacturing or AM process, which allows for easy printing from computer-aided design templates. As this new technology reaches its tipping point, review what the growth ...

  • The development of an onsite sanitation system based on vermifiltration: the ‘Tiger Toilet’

    This paper describes the development of a novel onsite sanitation system based on vermifiltration, the ‘Tiger Toilet’. Initial laboratory experiments demonstrated that feed distribution was not required, a worm density of 2 kg/m2 could be used, worms preferred wetter environments, and system configuration did not affect effluent quality. Installing the first prototype in the UK proved that the ...


    By IWA Publishing

  • Process safety and risk management audits for a ceramics manufacturing facility – Case Study

    Challenge Antea Group was contracted by a large, advanced materials organization to provide a Process Safety Management and Risk Management Program compliance audit of a specialty ceramics manufacturing facility in New Hampshire. Processing at the facility is related to the crystalline growth of materials used in the semiconductor manufacturing industry. Processing at the facility ...


    By Antea Group - USA

  • Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors

    Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors 3D printing is officially skyrocketing, with industrial applications in medical, biotech, aerospace, defense, and consumer electronics industries growing daily. At the heart of this acceleration is the additive manufacturing or AM process, which allows for easy printing from computer-aided ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you