Only show results in Connecticut? Ok

Laboratory Mills equipment for Monitoring and Testing

  • Premium

    Sample Preparation System

    Sample preparation includes Homogenisers both hand held and benchtop, blenders and grinding mills for preparing solid samples for further analysis. Rotary evaporators and Stomachers for liquid preparations and grinding mills for hard and brittle ...

    By Dragon Water Technologies based in Newport, UNITED KINGDOM. from Laboratory Equipment Product line

  • Premium

    ACME TwinSet - Model TW-ECH - Stand-Alone Dual Gas Monitor

    The Acme TwinSet and its microprocessor-based system features a high quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm activated relays for simple applications such as small parking ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - Stand Alone Detectors Product line

  • Premium

    ACME UniSet - Model UN-ECH Series - Stand-Alone Gas Monitor

    The Acme UniSet, with its microprocessor-based system, features a high quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm activated relays for simple applications such as small parking garages. The UniSet employs the best sensing technologies available: ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - Stand Alone Detectors Product line

  • Premium

    Sauereisen - Model No. 400 - Vinyl Ester Mortar

    Sauereisen Vinyl Ester Mortar No. 400 is used in the construction of floors, sumps, trenches, tanks, vessels and bleach towers in chemical processing; food & beverage plants; dairies; laboratories; textile, steel and pulp & paper mills. No. 400 has excellent resistance to oxidizing bleach solutions, mineral and organic acids, alkaline solutions and some organic solvents. When used with ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Mortars Product line

  • Premium

    Sauereisen - Model No. 21C - Furan Resin Mortar Grout

    Sauereisen Furan Resin Mortar/Grout No. 21C is a two-component, 100% carbon- filled bonding material for chemical resistant masonry units and quarry tile. No. 21C and chemical-resistant masonry units used with a suitable membrane form a complete system to protect concrete and steel substrates from attack by corrosive chemicals and physical ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Mortars Product line

  • Specac - Agate Pestle and Mortar - Grind Solid Samples

    Manual solid FTIR sample grinder: Agate Mortar and Pestles are the ideal tool for manually grinding solid samples with an appropriate mull agent (such as KBr powder, Nujol, or Fluorolube) in preparation for mull FTIR transmission analysis, diffuse reflectance, and KBr pellet press applications. Pure agate is non-absorbing in the infrared spectroscopic region. Specac Mortar and pestle sets are ...

    By Specac Limited based in Orpington, UNITED KINGDOM. from Sample Preparation Equipment - Mills + Grinders Product line

  • Model Type LRC - Laboratory Mills

    Tests and test series in the framework of product development or small production runs are the ideal application area for the Bauermeister LRC 250 Lab Roll Mills. The goal of this system is the gentle crushing of brittle to medium-hard products from the food, plastic or chemical industry producing narrow particle size distribution and a minimum amount of dust. Using the same roll diameter as used ...

    By Bauermeister Zerkleinerungs-technik GmbH based in Norderstedt, GERMANY. from Industrial Grinding - Other Products Product line

  • Model 8000M - Mixe Ball Mill

    The 8000M Mixer/Mill is a high-energy ball mill that grinds up to 0.2 – 10 grams of dry, brittle samples. The vial, which contains a sample and one or more balls, is shaken in a complex motion that combines back-and-forth swings with short lateral movements, each end of the vial describing a figure-8. The clamp’s motion develops strong G-forces in the vial, to pulverize the toughest ...

    By AXT PTY LTD based in Warriewood, AUSTRALIA. from Sample Preparation, Handling and Management Product line

  • Model RSD Combo - Smart Boyd Crusher

    The Smart Boyd Crusher RSD Combo has all of the unique features of the Boyd RSD combo but includes some automation to provide a pre-selected weight. The sample is weighed on a platform balance and the weight is communicated to the PLC, the split is then adjusted automatically from the ...

    By XRF Scientific Europe SPRL based in Brussels, BELGIUM. from Crushing & Milling - Laboratory Crusher Product line

  • Helios NanoLab - Model G3 CX - Imaging System

    The Helios NanoLab G3 CX delivers outstanding imaging performance produces sharp, clear, sub-nm-resolution images for accurately resolving nanoscale features as required for materials characterization or process monitoring - even on beam-sensitive or non-conductive samples. The Helios NanoLab G3 CX offers the ability to efficiently create ultra-thin, highest quality samples for HR S/TEM or atom ...

    By North America NanoPort (FEI) based in Hillsboro, OREGON (USA). from Materials Science Product line

  • Cutting mills CM 120 - VIBROTECHNIK

    The CM 120 cutting mill is laboratory-class equipment designed for comminuting small batches of material with grain size up to 20 mm. The CM 120 effectively comminutes fiber materials by crushing them with a plunger through a vertical shaft. See more: ...

    By Vibrotechnik LLC based in Petersburg, RUSSIA. from Crushing and Milling equipment Product line

  • Model AX60 - Analytical Mill

    Conquer particle size reduction challenges on a laboratory scale. Check out our AX 60 analytical mill if you have to reduce sample particle sizes for additional analysis. Faster and more thorough than a mortar and pestle the AX 60 grinding chamber accessory is attached to the CAT X1000 or X1000D drive motor and handles sample volume to 180 cc in a firmly coupled, dust-tight upper and lower ...

    By CAT Scientific, Inc. based in Paso Robles, CALIFORNIA (USA). from Modular Homogenizer Drive Units Product line

  • Eco-Pure - Model XL - Shavings Premium

    Our largest bedding flake, these XL Shavings are milled from sustainable European softwood sources and sieved to remove dust and small particles.  A baled product, XL shavings are ideal for farm species and where a deep litter is required to encourage foraging behaviour.  XL Shavings can also be introduced as an addition to natural nesting material. Highest quality bedding materials ...

    By Datesand Ltd based in Manchester, UNITED KINGDOM. from Lab Animal Bedding Product line

  • Eco-Pure - Shavings Premium

    A high quality traditional wood shaving product, milled from sustainable European softwoods and dust extracted during production.  Light and fluffy, this bedding type offers a great bulk bedding product, perfect for use in pens with larger species or where deep litter is required. Highest quality bedding materials made from European soft woods, manufactured to ISO 9001:2008 standards ...

    By Datesand Ltd based in Manchester, UNITED KINGDOM. from Lab Animal Bedding Product line

  • Hellweg - Model 80 Series - Grinder for Injection Moulding

    The small, compact Hellweg 80 series of beside-the-machine granulators are used directly mounted on the frame of an injection moulding machine or beside-the-machine. There they grind, among others, sprues arising from small to very smallest components and products in so-called micro injection moulding of, for example, mobile phones in telecommunications, or medical products such as syringes, ...

    By Hellweg Maschinenbau GmbH & Co. KG based in Roetgen, GERMANY. from Laboratory Mills Product line

  • Christy & Norris - Model 8 - Laboratory & Soil Mill

    A robust and reliable Lab Mill which is ideal for reducing small quantities for laboratory analysis. Typical Applications: Any material suitable for size reduction, typically used for testing or analysis. Specification: An easy-to-use laboratory mill for very small scale ...

    By Christy Turner Ltd based in Ipswich, UNITED KINGDOM. from Grinders Product line

  • North-Emergency Escape Breathing Apparatus

    In an emergency situation, every second counts until workers can reach safety. The EEBA provides portable respiratory protection to workers while they are leaving work areas which have been contaminated. EEBAs are ideal for use in chemical and petrochemical industries, laboratories and paper mills. A clear, detachable polyurethane hood offers good visibility with a secure neck seal for a complete ...

    By CG Industrial Safety based in Peekskill, NEW YORK (USA). from Respiratory - SCBA & Escape Respirators Product line

  • MITR - Model SJM-30 - Laboratory Vertical Stirred Ball Mill Machine

    Due to the special requirements of high and new technology and new material industry on mineral powder, powder industry is developing rapidly in the direction of ultra-fine grinding.The ultrafine powder has high specific surface area, low particle defect, high activity, fast reaction rate, good filling reinforcement, high solubility, low sintering temperature and high sintering strength. It ...

    By Changsha Mitrcn Instrument Equipment Co.,Ltd (MITR) based in Wangcheng District City, CHINA. from Stirred Ball Mills Product line

  • Enclosure for Benchtop Instruments & Devices

    MS Noise reduction enclosures for benchtop instruments & benchtop devices accommodate all major models of ultrasonic baths, sonicators, centrifuges, lab mixers, agitators, shakers, incubators, noisy instruments of measurement, etc. To put in a nutshell : all noisy small & medium lab equipments (just like Retsch Mixer Mill MM200 & MM400 ...

    By MS Noise based in Sens, FRANCE.

  • FRITSCH - Model PULVERISETTE 0 - Vibratory Micro Mill

    For batchwise fine grinding of small quantities. The Vibratory Micro Mill PULVERISETTE 0 is the ideal laboratory mill for fine comminution of medium-hard, brittle, moist or temperature-sensitive samples – dry or in suspension – as well as for homogenising of emulsions and pastes. The FRITSCH Vibratory Micro Mill PULVERISETTE 0 is recommended for sample preparation of RoHS tests (Restriction of ...

    By Fritsch Milling and Sizing based in Idar-Oberstein, GERMANY. from Ball Mills Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you