Laboratory Mixers Articles

  • Improved Blasting through Precise Initiation - Case Study

    Project Description Using blasting caps with electronic delay units, and programmable delay times down to 1 ms, it has become possible to employ wave superposition in rock blasting. It has been hypothesized that fragmentation is improved in areas between blastholes where the tensile waves meet, overlap and interact. An improved fragmentation can, in turn, result in reduced costs for both ...


    By Itasca International, Inc

  • Air Contaminant Control Ventilation for Controlling Worker Exposure

    Local Exhaust Ventilation to Control Air Contaminants Local Exhaust Ventilation for reducing worker exposure is the best description of ventilation for the purpose of controlling air contaminants that may be released inside the building. The objective is to capture the containment before it reaches the operation and gets into the general air stream. As of 2017, Industrial Production has ...


    By Atlantic Environmental, Inc.

  • High Shear Lab Mixer

    AD18 High Shear Lab MixerAD145S-P High Shear Lab MixerAD500S-H High Shear Lab MixerAE300L-H High Shear Lab MixerAE300L-P High Shear Lab MixerAE500S-H-50G High Shear Lab MixerAE500S-H-70G High Shear Lab MixerAE500S-H-90 High Shear Lab MixerAE500S-P-70G High Shear Lab MixerAE500S-P-90G High Shear Lab MixerR100 Mixer We have ...

  • Stirrer

    This a Overhead laboratory mixer stirrer with variable speed function, simple operation in a wider speed range, apply to a stable liquid stirring, especially for mixing a small volume of samples, petroleum, chemical, medical and it was specially designed for application in health, ...

  • Glutaraldehyde and Formaldehyde – Health Hazards in Hospitals and Healthcare Facilities

    Glutaraldehyde and Formaldehyde Glutaraldehyde is very similar to formaldehyde in its structure and uses in the healthcare industry. Chemically, Glutaraldehyde exists at room temperature as a liquid, whereas formaldehyde exists under those conditions as a gas, which can easily be dissolved in water. ...


    By Atlantic Environmental, Inc.

  • CETCO TC Booster used on Blatchford Dess Energy Centre #1 - Edmonton Municipal Airport Geothermal Project - Case Study

    In May 2018, a drilling contractor started the installation of 570 (6” diameter x 500ft deep) geothermal boreholes in Edmonton, AB, Canada. The project at the former Edmonton Municipal Airport started with 2-rigs drilling in a formation of clay, silt, and coal seams. It increased to multiple rigs before the successful completion in October 2018. The grout development started prior to the ...


    By CETCO

  • Stirrer

    Are you looking for digital-shear-mixer-emulsifier? Here it is. This a Overhead stirrer with variable speed function, simple operation in a wider speed range, apply to a stable liquid stirring, especially for mixing a small volume of samples, petroleum, chemical, medical and it was specially designed for application in health, environmental, ...

  • Waste water treatment lagoon - Case study

    Application Waste Water Treatment Lagoon – Michigan Village Lagoons had not been Cleaned in 35 Years Estimated 3,000,000 Gallons of Anaerobic Sludge Material Anaerobically Digested WWTP Sludge 2 – 6% Solids Problems Sludge build up in the Primary ...


    By Sebright Products, Inc.

  • Glutaraldehyde – Health Hazards in Hospitals and Healthcare Facilities

    Glutaraldehyde is very similar to formaldehyde in its structure and uses in the healthcare industry. Chemically, glutaraldehyde exists at room temperature as a liquid, whereas formaldehyde exists under those conditions as a gas, which can easily be dissolved in water. Glutaraldehyde is often used as a substitute for formaldehyde because formaldehyde is now a suspect cancer-causing substance. ...

  • Hazardous waste, ST-75E, New Jersey - Case Study

    ST-75E shredding containers with residual oils and lubricants from lab testing and ...


    By Shred-Tech Corp.

  • Analox partner Azote attend leading Trade Show Foodtech Packtech

    Azote Industrial Gas Solutions, based in New Zealand, provide on-site nitrogen and oxygen generators across a wide range of applications and will be attending this year’s renowned FoodTech PackTech (FTPT) exhibition in Auckland from 18th – 20th September. The 3 day event hosted at ASB Showgrounds, Auckland is New Zealand’s ...


    By Analox Sensor Technology

  • Binary vs. Quaternary: Which Pump is Right for You?

    How to decide which chromatography system pump is right for you Well, you’ve made it this far and I am guessing that you are coming back because I have provided some useful information to help you understand the differences and nuances of a binary versus ...


    By Waters Corporation

  • Binary vs Quaternary: How to Decide Which Pump is Right for You

    Well, you’ve made it this far, and I am guessing that you are coming back because I have provided some useful information to help you understand the differences and nuances of a binary versus quaternary pump. This final chapter will help you think of some questions to ask when you are trying to make a decision of which pump to buy, or which system you would like to implement in the ...


    By Waters Corporation

  • Application of lactic acid bacteria in removing heavy metals and aflatoxin B1 from contaminated water

    In this study selected lactic acid bacteria (LAB, Lactobacillus acidophilus, Lactobacillus rhamnosus, Lactobacillus plantrium and Streptococcus thermophiles) and probiotic bacteria (Bifidobacterium angulatum) were tested for their ability in removing heavy metals (HM) including cadmium (Cd), lead (Pb) and arsenic (As) as well as aflatoxin B1 (AFB1) from ...


    By IWA Publishing

  • I need a roller mixer to fit different sizes of tubes and bottles, can you recommend one?

    Q: I need a roller mixer, but our lab works with tubes and bottles in different sizes – what would you recommend? A: The Stuart range of roller mixers would be ideal. These have recently been updated, and are now more flexible than ever – letting you use one unit to mix small centrifuge tubes right ...


    By Camlab Limited

  • What is the difference between aluminium and ceramic hotplates?

    Hotplates or combined hotplate stirrers are used in most laboratories for basic heating and stirring applications. Many models are offered with either a ceramic or aluminium top ...


    By Camlab Limited

  • Blending microbes demands gentle touch

    Environmental-restoration product manufacturer requires fast, uniform, gentle blending of powdered microbes, enzymes and nutrients The microbial formulations that United-Tech, Inc. produces are used to break down or detoxify a broad array of complex, often-toxic organic compounds, greasy spills and other contaminants in a variety of ...

  • Rotary batch blenders help DIP get pre-mixes to market fast

    Mixers are more efficient than double-cone units Ductil Iron Powder (DIP), Buzau, Romania, was established in 2000 as a spin-off of Ductil Steel. Its products are iron and alloyed powders for use in powder metallurgy and welding applications. The plant for making the iron powders began operation in 1995, and by 2000 it reached its current capacity ...

  • Pharmaceutical glass manufacturer blends 120 batches/day of abrasive ingredients

    The manufacture of high-quality pharmaceutical glass is an exacting business that calls for careful control at all stages of the process in order to obtain the desired properties in the final product. Those properties vary, depending on what the glass is to be used for, so the initial step - the precise measurement and thorough mixing of multiple ingredients - is critical to the rest of the ...

  • Bringing powdered metal blending in-house, rotary-style

    When processing powdered metal compounds for products such as gyro rotors, flywheels, counterbalances, boring bars and grinding quills, the proportion of powdered metal ingredients must be precise, and the distribution of those ingredients 100 percent uniform. Mi-Tech Metals, Indianapolis, IN, has been manufacturing products from high-density tungsten-based alloys for more than 26 years, during ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you