Laboratory Ovens Articles

  • Permeation testing of flexible food packaging films - Case Study

    FFP Packaging Solutions specialise in high quality printed and plain flexible packaging, heat seal lidding films and films for high temperature/oven use. Offering the food industry innovative flexible packaging solutions, FFP ensure that all the film materials used have been vigorously tested to ensure that the quality of the packaging is stable when used in different environmental conditions ...


    By Systech Instruments Ltd

  • Comprehensive analysis of tobacco smoke using TD–GC×GC–TOF MS with Tandem Ionisation

    The hazardous constituents of cigarette smoke have attracted considerable attention lately, especially with increasing regulation around the world limiting or banning smoking in public places – and even in private cars if children are present. From an analytical perspective, however, there is much that remains to be learnt about the composition of cigarette smoke, because of its high degree ...


    By SepSolve Analytical

  • ARCO Chemical - Case Study

    Custom Designed Furnace Reclaims $100,000 Condenser PCPC burn-off oven removed 4,240 lbs. of styrene polymer in compliance with local environmental laws. The Problem: ARCO Chemical Company's Beaver Valley plant in Monaca, PA, a manufacturer of styrene-based plastics, was experiencing severe problems and expense with the periodic cleaning of their ...

  • How do Peltier elements work?

    Peltier heating and cooling systems offer precise control as well as a big energy saving when compared to traditional compressor methods. Memmert utilise the technology in their ...


    By Camlab Limited

  • How do Memmert ovens and incubators ensure optimum temperature distribution?

    The German manufactured Memmert range of ovens and incubators are known for their high quality materials, state of the ...


    By Camlab Limited

  • FFP choose Systech’s oxygen permeation analyser for testing flexible films - Case Study

    FFP Packaging Solutions specialise in high quality printed and plain flexible packaging, heat seal lidding films and films for high temperature/oven use. Offering the food industry innovative flexible packaging solutions, FFP ensure that all the film materials used have been vigorously tested to ensure that the quality of the packaging is stable when used in different environmental conditions ...


    By Systech Instruments Ltd

  • Heat treatment of steels and other metals case study

    Application Moisture is measured in the blanketing gases that are used in the treatment of steel. Problem Inert blanketing gases are required during the heat treatment of steels to prevent oxidation of the metal product. At heat-treating temperatures, moisture and oxygen will readily react with the metal to form an undesirable metal-oxide coating on the ...

  • DryVap SPE Concentration application notes

    Designed to emulate the traditional Kuderna-Danish (KD) method, the DryVap Concentrator System combines what were once manual steps into one automated process. Using a unique combination of vacuum, heat, and sparge gas, the DryVap Concentrator System rapidly evaporates and gently concentrates extractions down to a precise volume.  The DryDisk Separation Membranes ...


    By Horizon Technology, Inc.

  • Energy Savings Case History

    The Customer The Company is a worldwide supplier of thousands of innovative and reliable products to dozens of diverse markets—from automotive to healthcare to renewable energy to electronics. Products include tapes, adhesives, abrasives, films, reflective materials, filtration systems and an array of other products that keep homes clean, offices organized and buildings ...

  • How does The papermaking win the market?

    The website of the Ministry of Industry and Information Technology released the 6th 2012 industries and eliminate backward production capacity enterprise list (second batch) ", involving 15 areas of 182 companies, including 51 of the paper-making enterprises. Require the provinces (autonomous regions and municipalities) to take effective measures to strive in the end of September 2012, all ...

  • Analysis of trace hydrocarbon impurities in 1,3-Butadiene using optimized RT-Alumina BOND/MAPD plot columns

    Abstract Identifying and quantifying trace impurities in 1,3-butadiene is critical in producing high quality synthetic rubber products. Standard analytical methods employ alumina PLOT columns which yield good resolution for low molecular weight hydrocarbons, but suffer from irreproducibility and poor sensitivity for polar hydrocarbons. In this study, Rt-Alumina BOND/MAPD PLOT columns were ...


    By Restek Corporation

  • MEGTEC innovation cuts flexible packaging manufacturer’s energy bills by $10,000 a month

    Saving money on its energy bills turned out to be a lot of hot air for flexible packaging innovator Shields Bag & Printing. As a custom blown film extruder, Shields Bag extrudes, prints and converts film for flexible packaging products used in a wide range of industries. The company produces more than 100 lines of products that are shipped to clients all over the world, from produce bags to ...


    By Babcock & Wilcox MEGTEC LLC

  • Determination of VOCs in water using static headspace GC/MS with simultaneous full scan and selective ion recording

    The combination of static headspace sample introduction and gas chromatography/mass spectrometry (HS/GC/MS) provides the analyst with a powerful, fully automated technique for the determination of trace volatile organic compounds (VOCs) in water. Samples may be hermetically sealed in the headspace vial at the point of sampling. This approach avoids errors due to glassware cross-contamination and ...


    By PerkinElmer, Inc.

  • Production control of solder powder - Case Study

    In the past most industrial solder pastes were made using oxidised powder produced by simple air atomisation. Pressure to improve the control of the size range of solder pastes, and to avoid the use of corrosive halide fluxes, has led to a demand for lower oxide levels. In addition increased use of automated oxygen analyzer application systems has led to much more critical specifications for ...


    By Systech Instruments Ltd

  • 2 Sisters Food Group - Case Study

    High chicken fat, causing screen pluggage, resulting in annual disposal cost of $45,000. Downstream processes could not operate efficiently due to high fat resulting in high surcharges, compliance issues as well as odor problems. FogbusterTM 1800, complete with solids removal augers, low shear pumps and fully automated control systems. Steam utilized due to the fast solidifying nature of the ...


    By FogBusters, Inc.

  • Case study - Bakery ethanol

    Overview A bread and bun bakery was faced with installing air pollution control equipment to control the volatile organic compounds (VOCs) emitted during their baking process. The local regulatory agency requires bakeries that generate over 25 tons of ethanol per year to reduce emissions by 95% by installing control devices on their ovens. The airstream that needed to be treated included ...

  • Electrostatic painting residues as an alternative raw material for red clay industry

    In this study, the viability of using electrostatic painting residues - paint sludge - as a raw material to the red clay industry was investigated. Red clay-based ceramic masses containing electrostatic paint residues were formulated during the study. The clays were obtained from the Rio do Rastro deposit, in Gravataí, and were of the standard formulation used in industry. Different ceramic mass ...


    By SAGE Publications

  • Cadbury Schweppes - Case Study

    The effluent now initially treated by the Forbuster system efficiently removes the solid debris before de-oiling the effluent. Wedge wire screen now works as designed to remove fine solids and carbon from the ovens. All downstream processes operating at peak efficiencies. Site is now compliant with the effluent standards required, odor was dispelled and sludge haulage costs significantly reduced. ...


    By FogBusters, Inc.

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Coke Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you