Only show results in Connecticut? Ok

Material Testing services for Monitoring and Testing

  • Premium

    Certification and Calibration Services

    AMETEK Land Certification offers an accredited best in class service to ensure you are obtaining the optimal operating performance from your temperature measurement systems, improving the accuracy of your measurement capability and meeting required national and international quality standards.

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Premium

    Development & Technology Partner Services

    Innovative Sensor Technology IST AG is not only a manufacturer of sensor products - we are a global team of experts in the field of sensor technology offering our skills and experience as development partners for customers. We offer extensive service when it comes to advanced application needs or the development of new technologies.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Air Pollution Modelling Services

    Application of state-of-the-art modelling systems including WRFChem, FLEXPART and others to provide the most suitable and reliable products to clients. Areas covered range from mining, heavy Industry, power plants, urban pollution. ISO 9001:2015 certified.

    By Raymetrics S.A. based in Athens, GREECE.

  • Premium

    Airport Surveys

    Runway and taxiway structural condition evaluation and monitoring. GPR Applications on Airports: Runway and taxiway structural condition evaluation, forensic and environmental surveys (night survey achieved at a speed of 60 to 70 km/h without any impact on either safety or flight traffic).

    By Roadscanners Oy based in Rovaniemi, FINLAND.

  • Premium

    Non-Destructive Testing Solutions

    Non-Destructive MPI and UV Testing Made Simple. Detecting metal surface flaws is no easy task, especially when you’re using magnetic particle inspections (MPIs), ultraviolet light (UV), or liquid penetrant testing to locate potentially dangerous particles not visible to the human eye. These precise, non-destructive testing procedures require ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Catalyst Sales (New and Replacement) Catalyst Testing Services

    Your entire operation can depend on the performance of your VOC control system. It pays to make sure your catalytic oxidizer is ready to do its job. Dürr MEGTEC brings you the benefits of more than 30 years of experience in providing environmental compliance solutions worldwide. We’re specialists in advanced catalyst formulations and ...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    FLUXANA - XRF Test Methods Service

    To test your quality control, FLUXANA offers the competent analysis of your samples with X-ray fluorescence analysis (XRF). Our laboratory works in accordance with ISO 17025; accreditation has been applied for with the Deutschen Akkreditierungsstelle GmbH (DAkkS, German Accreditation Body).

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Concrete Surveys

    Moisture mapping in concrete structures. Structure and problem mapping: Roadscanners does concrete surveys where it is possible to locate for example. Locate metallic and non-metallic targets in walls, floors and ceilings (rebar, conduits, post-tension cables). Measure slab thickness. Structure inspection and condition assessment. Moisture ...

    By Roadscanners Oy based in Rovaniemi, FINLAND.

  • Premium

    Development Center Services

    To support the development of specialized and proprietary coating and drying applications, Dürr Megtec has an in-house Development Center located at its headquarters facility in De Pere, Wisconsin, USA. The Center features world-class laboratory bench-top tools and a complete roll-to-roll pilot coating line that can be rented. The pilot line ...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA). from Dürr Megtec Services and Support Service line

  • Premium

    Tailings Dams Services

    Tailings dams are among the largest and most critical artificial structures in the world. Their analysis requires careful evaluation of all components and loading conditions. Itasca has performed detailed design and stability analyses for major tailing dams. Each analysis has been reviewed by experts representing governing authorities.

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Mining Service line

  • Premium

    GIG Karasek - Technical Center / Pilot Plants

    Under perfectly adapted conditions, your own test materials can be subjected to meaningful laboratory and pilot tests by field-proven specialists. All systems are designed for extensive flexibility, interconnectable and can be configured and combined as required for a wide range of tasks.

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Inspection Services

    Granite Surface table : 1425 X 975mm- 1 No. Mitutoya Make. Inspection Instruments : 0-99mm LCD type ultrasonic thickness gauge. Pistol Caliper, Steel rule, vernier, Hook vernier, height gauge, Inside & outside caliper Hydro testing facility. Rust Prevention : Radiation Check Meter for radioactivity contamination Testing Manganese and Zinc ...

    By Amex Alloys Private Limited based in Coimbatore, INDIA.

  • Aligning & Resurfacing Services

    Meet our first line of defense against poor dryer performance, reduced lifespan and wear: Aligning and Resurfacing. Thompson’s Aligning and Resurfacing service for all rotary drying systems is the best available technology. The ultimate goal of Aligning and Resurfacing is to create round surfaces, reduce vibrations, eliminate excess wear on ...

    By Thompson Dryers based in Topeka, KANSAS (USA).

  • Dimensional Calibration Services

    Exova METECH provides traceable and accredited calibration of dimensional measuring equipment and instruments. We are vendor independent and able to support all manufacturers and instrument types.

    By Exova Group plc based in Burlington, ONTARIO (CANADA). from Calibration Services Service line

  • Enhanced Faster Affordable Repair Service

    Enhanced Faster Affordable Repair Service for Doppler Weather Radar pedestals & receiver transmitters.

    By Advanced Designs Corporation based in Bloomington, INDIANA (USA).

  • Fulcrum - Aerial Drones Services

    Fulcrum carries fully commercial operating insurance and all necessary CASA approvals for aerial work. We utilise the very latest in UAV technology to provide Commercial and Industrial Aeria

    By Fulcrum Robotics based in South Hobart, AUSTRALIA.

  • UV Accelerated Weathering

    All materials and products used in the outdoor environment are constantly exposed to varying weather conditions, the effects of which can be detrimental over time. Although ultraviolet (UV) light makes up only about 5% of sunlight, it is responsible for most of the sunlight damage to poly­mer materials exposed outdoors. Add moisture to the ...

    By Westpak Inc based in San Jose, CALIFORNIA (USA). from Reliability Service line

  • Contract Inspection Services

    Willrich Precision Instrument Company offers a complete line of CMM first article contract inspection services, including inspection and certification of production tooling, gaging and fixtures. We can perform part & fixture measurements of all types no matter how complex. First article inspection services include capability studies .

    By Willrich Precision Instrument Company, Inc based in Cresskill, NEW JERSEY (USA).

  • 3D Laser Scanning Services

    3D Laser Scanning is a non-contact, non-destructive technology that digitally captures the shape of physical objects using a line of laser light. 3D laser scanners create “point clouds” of data from the surface of an object. In other words, 3D laser scanning is a way to capture a physical object’s exact size and shape into the ...

    By Baghouse and Industrial Sheet Metal Services, Inc. based in Corona, CALIFORNIA (USA).

  • Weather Normalization Analysis Services

    A weather normalization analysis requires comparison of energy consumption and “heating degree days” or “cooling degree days” to identify the amount of energy used per heating degree day/or cooling degree day during the periods with and without PACE3 in operation. This allows for a precise and fair analysis of energy use ...

    By PaceControls LLC based in Philadelphia, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you