MCERTS services for Monitoring and Testing

ENVEA UK offer industry leading expertise to customers and partners through a comprehensive range of technical services, training packages and a 'knowledge transfer' approach. The aim is to advise and support customers and partners in meeting the specific particulate monitoring challenges they face, from initial consultation and product selection ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - Technical Services Service line

Configuration Services are designed for operators requiring reliable and representative trending data from their dust monitors, without the need for calibrated, quantitative measurement. PCME's Service Engineers have extensive experience configuring dust monitors to maximise filter performance and process benefits. Customers using Dust Gross ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

ENVEA UK has extensive experience assisting operators to meet their compliance monitoring requirements, where understanding that calibration is not simply an isokinetic test is the key to success. Two categories of service are offered for the calibration of Particulate Measurement Systems: Annual Calibration Assist (which does not include ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

A full range of Setup Packages are offered to customers, bringing extensive experience from a wide variety of installation and commissioning projects and a thorough knowledge of the issues which can arise. Whether your ENVEA UK particulate monitoring system is to ensure legislative compliance or provide filter performance monitoring and process ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

Alarm Setting Services are for plant operators using Dust Gross Filter Failure Detectors. To ensure these instruments deliver maximum benefit, it is important that the alarms are configured to the optimum level for the process-specific conditions. ENVEA UK offer two categories of Alarm Setting Service for Dust Gross Filter Failure Detectors: Alarm ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

Air velocity calibration and anemometer calibration services are undertaken in the laboratories' universal UKAS accredited wind tunnels, offering extreme accuracy in both low and high speed operating modes. All types of anemometers and wind speed instruments can be calibrated. The facility can offer independent, UKAS accredited air velocity ...

By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

In addition to our system integration and maintenance services, we also offer calibration services to ISO standards to ensure that emissions monitoring systems meet stringent accuracy requirements.

By EMACCS Ltd based in Aylesford, UNITED KINGDOM.

In order to ensure reliable, long term operation of your Wastewater Sampling equipment it is essential that it is correctly installed. Working with our partners and Distributors, Aquamatic can offer a complete 'turn-key' solution for your wastewater sampling requirements. Our team of Aquamatic Certified engineers include ...

By Aquamatic Ltd based in Irlam, UNITED KINGDOM.

Using only UKAS and MCERTS accredited laboratories Our field service technicians can offer on – site sampling of contaminated soils.  All teams are trained to operate on construction sites and to observe and adhere to all health and safety guidelines. HWM offer a thorough, intrusive soil investigation service – providing a range of analysis ...

By HWM Group based in Otterbourne, UNITED KINGDOM.

ndustrial processes which emit to atmosphere do so under permit granted by the Environment Agency or the Local Authority. The permit would define the permissible limits for the various pollutants emitted by the process. Some processes may have continuous emissions monitoring systems (CEMS) installed providing real time data on the emissions whilst ...

By CES Environmental Instruments Ltd based in Burton on Trent,, UNITED KINGDOM.

SiteRight Health and Safety Protocols comprise: A risk assessment is conducted on the initial visit to a client site. The risk assessment is documented and supplied to the client. The risk assessment is repeated on all subsequent visits and when our site staff deem it necessary. A copy of the Siteright Risk Assesment Protocol can be forwarded to ...

By Siteright Environmental based in Enniskerry, IRELAND.

On-site heavy metals analysis is accomplished using a technique called X-ray Fluorescence (XRF). There are a number of XRF instruments available but QROS uses XRF analysers from Oxford Instruments. X-ray Fluorescence (XRF) instruments work by exposing a sample to be measured to a beam of X-rays.  The atoms of the sample absorb some of this ...

By QROS Limited based in Hayling Island, Portmouth, UNITED KINGDOM.

The Environment Agency has established its Monitoring Certification Scheme (MCERTS) to deliver quality environmental measurements. The MCERTS product certification scheme provides for the certification of products according to Environment Agency performance standards, based on relevant CEN, ISO and national standards. The Environment Agency has ...

By Sira Certification based in Dartford, UNITED KINGDOM.

We are the leading UK consultancy for offshore emissions baseline test surveys for legislative compliance. We helped to write the guidelines for BEIS for the 2009 round of PPC offshore sampling, and are working with BEIS and Oil & Gas UK to support the technical guidelines for this up-coming round of legislative LCP requirements. Our insight, ...

By Ingen based in Aberdeen, UNITED KINGDOM. from Energy & Emissions - Environmental Compliance and Studies Service line

Environmental sampling and monitoring services with Aqua Enviro’s experienced team of technicians and process scientists who can provide expert advice for all your site requirements throughout the UK and Ireland.

By Aqua Enviro based in Wakefield, UNITED KINGDOM. from Other Services Service line

Waters are sampled from a wide variety of sources, but any discharges must comply with discharge consent limits, set by the Environment Agency. DETS can provide a wide range of tests for routine monitoring, site characterisation, or contamination to water courses. This can include a range of parameters included in the JAGDAG list of potential ...

By Derwentside Environmental Testing Services based in Consett, UNITED KINGDOM. from Analytical Services Service line

Fitz Scientific are market leaders in the provision of environmental air emissions monitoring. We are accredited to the MCERTs standard and ISO 17025 for a range of air emissions methods. Please click here for details on our air methods. We have an extensive list of methods based on EN, ISO and BS standards.It is important also to note that our ...

By Fitz Scientific based in Drogheda, IRELAND. from Environmental Service line

Our air emissions monitoring services are accredited to the MCERTs standard and UKAS under scope 2801. We have an extensive range of air emissions monitoring methods, the majority of which are BS EN methods. These are in accordance with the requirements of the Environment Agency, SEPA, Northern Ireland Environment Agency and the Irish EPA. Our ...

By Fitz Scientific based in Drogheda, IRELAND. from Industrial Monitoring and Testing Service line

For over 50 years, Sira has specialised in UKAS accredited certification of engineering, manufacturing and technology-based companies and is a leading provider of management system certification to a broad range of industries throughout Europe, America and Asia.

By Sira Certification based in Dartford, UNITED KINGDOM.

With the array of continuous emissions monitoring systems (CEMS) available choosing the right one for a particular application can be a daunting task. Initial capital investment in any system will run into thousands of pounds allied to which are the longer term service and maintenance costs.Clearly the environment within an emitting stack will be ...

By CES Environmental Instruments Ltd based in Burton on Trent,, UNITED KINGDOM.