Only show results in Texas? Ok

Metal Detection services for Monitoring and Testing

  • Premium

    Shredder Light Fraction (SLF) / Automobile Shredder Residue (ASR) Recycling Services

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Premium

    Field Studies Services

    Using our X-ray Based Filter Method (XFM) CES can survey most stack emissions on your facility for up to 48 different elements per sample. The samples are collected on a filter, which can be readily shipped to our laboratory for analysis by non-destructive x-ray fluorescence (XRF) procedures similar to those listed in EPA’s Compendium Method ...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Cleaning Soil And Water Contamination Services

    Ex Situ/In Situ Soil Remediation-cleaning and/or removing contamination from soil, heavy metals, hydrocarbons to non-detectable. Oil Spill Clean Up-Non Toxic, Enviromnmentally safe.

    By Global Enviro Science based in Tunis , TUNISIA.

  • Services For Product Inspection

    METTLER TOLEDO Garvens and Safeline are committed to providing world class service and support for the life of your checkweighers, metal detectors and x-ray systems. Our goal is to work in partnership with you to ensure that your lines are always running efficiently and effectively while complying with standards, legislations and regulations like ...

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • MtoZ Biolabs - Oxysterols quantification

    MtoZ Biolabs offers metallomics analysis service using ICP-MS, which has characteristics of high accuracy, specificity, and sensitivity. We guarantee accurate analysis of metals even in low abundance. With our optimized sample preparation methods, interference from high-abundance dominant metabolites can be hugely reduced, thus further increasing ...

    By MtoZ Biolabs based in MASSACHUSETTS (USA).

  • CNC Milling Services

    Milling is the machining process of using rotary cutters to remove material from a workpiece advancing (or feeding) in a direction at an angle with the axis of the tool.  It covers a wide variety of different operations and machines, on scales from small individual parts to large, heavy-duty gang milling operations. ...

    By B.I.R.S. Machine & Supply based in Anniston, ALABAMA (USA).

  • Service and Repair

    With nearly 65 years of experience and facilities located around the world, Eriez offers an unparalleled level of skill, knowledge and access. A qualified Eriez engineer or technician is within hours of you to ensure your equipment and systems stay online.

    By Eriez Manufacturing Co. based in Erie, PENNSYLVANIA (USA).

  • Pipeline Network Monitoring

    To maintain the reliability of the gas pipeline network, normative requirements on the operator require regular checks of the pipeline routes. In addition to the very high qualification profile of professional personnel, the corresponding equipment must also be provided to carry out this monitoring work. We, as a long-standing certified partner of ...

    By Bohlen & Doyen based in Wiesmoor, GERMANY.

  • Analytical Capabilities Services

    Soleras’ in-house analytical and materials characterization capabilities include the following: ICP-OES (inductively coupled plasma optical emission spectrometry) to detect trace metals. Gas analysis for emission and process monitoring. SEM (scanning electron microscopy) with EDS (energy dispersive spectroscopy) for analysis of materials and ...

    By Soleras Advanced Coatings NV based in Deinze, BELGIUM.

  • Heavy Metals Analysis

    On-site heavy metals analysis is accomplished using a technique called X-ray Fluorescence (XRF). There are a number of XRF instruments available but QROS uses XRF analysers from Oxford Instruments. X-ray Fluorescence (XRF) instruments work by exposing a sample to be measured to a beam of X-rays.  The atoms of the sample absorb some of this ...

    By QROS Limited based in Hayling Island, Portmouth, UNITED KINGDOM.

  • Geophysical Services

    GF Instruments provides methodical research, near-surface measurements, consulting and services in:

    By GF Instruments, s.r.o. based in Brno, CZECH REPUBLIC.

  • Electromagnetic (EM) Terrain Conductivity and Induction

    EM conductivity and induction investigations are a rapid and cost effective way to map landfills, locate USTs and buried drums/waste, as well as map shallow groundwater contamination.GeoSeek uses the Geonics EM31DL Terrain Conductivity Meter to measure soil conductivity and the Geonics EM61-MKII system for precision metal detection.

    By SubTerra Geoservices LLC based in Pine Beach, NEW JERSEY (USA).

  • Geophysics Exploration Services

    D'Appolonia provides a full range of geophysical exploration services and we routinely perform the techniques listed at the right, all of which have been successfully applied on our engineering and environmental projects. Currently, our primary application of geophysical techniques is related to archaeology, environmental engineering, geotechnical ...

    By D`Appolonia Engineering based in Monroeville, PENNSYLVANIA (USA).

  • Archaeological Geophysics Services

    Geophysical surveys are used to create maps of subsurface archaeological features. Features are the non-portable part of the archaeological record, whether standing structures or traces of human activities left in the soil. Geophysical instruments can detect buried features when their electrical or magnetic properties contrast measurably with ...

    By ClearView Geophysics Inc. based in Brampton, ONTARIO (CANADA).

  • Validation : Product Inspection

    FreeWeigh.Net® from METTLER TOLEDO is a software system for Statistical Quality Control (SQC) that offers GMP 1compliant system validation. It is ideal for Food, Pharmaceuticals, Cosmetics and Chemicals industries.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Validation Service line

  • Laboratory Testing Services

    Axion can pre-test potential new sources of polymer feedstocks before you invest time, effort and money in full scale production trials. Our pilot-scale facility can duplicate a full scale process from raw material separation right through to injection moulding of finished polymer resin.

    By Axion Group based in Hanwell, UNITED KINGDOM. from Consulting Services Service line

  • Pipe Integrity

    Using basic thermographic principles it is possible for us to show areas of scale build – up, decreasing pipe wall thicknesses and weld discrepancies.

    By Ti Thermal Imaging Ltd. based in Weybridge, UNITED KINGDOM. from Oil & Gas Service line

  • Corrosion Evaluation Services

    Corrosion of metals is a costly problem that is often caused by environmental or chemical contamination. Constellation has extensive resources for the evaluation of corrosion residues; the first step in determining the source of the corrosion and determining possible solutions. Localized corrosion on the surface of components can be evaluated ...

    By Constellation Technology Corporation based in Largo, FLORIDA (USA). from Chemical Analysis Service line

  • Subsurface Utility Engineering

    GEL Geophysics is proud of our track record in providing challenging Subsurface Utility Engineering (SUE) solutions. We help our clients avoid service interruptions, project delays and possible catastrophe due to unexpected encounters with buried utilities and other infrastructure. Our goal is simple: solve complex underground mapping issues with ...

    By GEL Engineering LLC based in Charleston, SOUTH CAROLINA (USA). from Geophysics Services Service line

  • Sewer Inspection Services

    Internal inspections of water and sewer lines are a primary service offered by Hibbard Inshore. Hibbard Inshore’s ROV fleet has the ability to travel extensive lengths through filled, partially filled, and dry pipes to collect data and determine the condition of these pipes using swimming floating and crawling vehicles respectively. By ...

    By Hibbard Inshore based in Auburn Hills, MICHIGAN (USA). from Inspections Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you