Only show results in Virginia? Ok

Mold Testing services for Monitoring and Testing

  • Premium

    Commercial Roof Leak Detection Services

    Commercial Roof leaks can lead to structural damage, mold, or completely compromise your production abilities. Once water gets inside your structure it can be difficult to locate the source of the leak and to determine the extent of the damage due to water's ability to travel. EnTech has been utilizing IR-EPA (Infrared Energy Pattern Analysis) ...

    By EnTech Engineering Company based in Saint Louis, MISSOURI (USA). from Other Services Service line

  • Spore Trap Analysis

    Analysis includes identification to genus or group of all fungi present, quantification to spores/m3, and a general assessment of background debris.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Mold Testing: Air Samples Service line

  • Inspection Services

    We provide location assessment and inspection that includes examination of the property grounds, building exterior, crawl space, attic, and interiors. We assess the property for mold contamination and as important the cause of that contamination. Our reports will include steps to cure current problems and to prevent future problems.

    By American Mold Experts based in Plainfield, INDIANA (USA).

  • PCR Test: 15 Important Indoor Molds

    Analysis includes detection and quantification of fifteen important indoor molds by mold-specific quantitative PCR (MSQPCR). Applied methodology has been developed by and is licensed through the EPA. Detection and quantification include Acremonium strictum, Aspergillus fumigatus (A. fumigatus and Neosartorya fischeri), Aspergillus niger (A. niger, ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from PCR Testing Service line

  • Direct Microscopic Exam (Qualitative)

    Analysis includes a determination of whether spores present are indicative of mold growth or simply a mix of spores coming in from the outside (normal fallout). If mold growth is present, analysis includes identification to genus or group and a qualitative assessment of the amounts present. A general assessment of non-biological debris and other ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Mold Testing: Surface Samples Service line

  • PCR Test: ERMI Panel

    ERMI is the Environmental Relative Moldiness Index - the combination of EPA research, powerful Polymerase Chain Reaction (PCR) technology, and a new method to screen homes for mold. Based on recently published data from EPA researchers and the 2006 HUD American Healthy Home Survey, the test has been developed as a tool to evaluate the potential ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from PCR Testing Service line

  • Mould Assessment & Water Damage Services

    Mould growth within indoor environments can lead to potentially serious health effects in susceptible individuals, such as the young and elderly, as well as immuno-compromised individuals. Conditions conducive to the onset of mould growth should be corrected as soon as possible to avoid potential issues related to building maintenance and occupant ...

    By Enviro Management Inc. based in Toronto, ONTARIO (CANADA).

  • POLYCRETE System Manholes

    POLYCRETE system manholes by MEYER are made of reactive resin moulding material with filler. Neither cement nor water are used. The common name of the material is polymer concrete, also abbreviated as PRC for 'polyester resin concrete'. The material properties and product dimensions are in line with DIN 54815. The moulding material meets the ...

    By meyer-POLYCRETE GmbH - Meyer Rohr & Schacht GmbH based in Lueneburg, GERMANY.

  • THE BUILT ENVIRONMENT

    We offer Chemical Analysis for the Built Environment where sensitivity is required in understanding the composition and nature of various substances:Anthrax or gypsum in plasterChlorofluorocarbons (CFCs) in foam and polystyreneLead in paint surveysMould analysisPaint layers and thicknessTests for over 30 metals in paint

    By Envirochem Analytical Laboratories LTD based in Fareham, UNITED KINGDOM.

  • Mold & Bacteria Services

    In recent years, significant publicity has surrounded the detrimental effects of mold and bacteria contamination on human health. According to a study conducted by the Occupational Safety and Health Administration (OSHA), one-third of the 70 million Americans who work indoors do so in buildings that are breeding grounds for an array of ...

    By Airtek Environmental Corp. based in Long Island City, NEW YORK (USA). from Environmental Consulting Services Service line

  • Mold Testing

    Guardian Mold Prevent Corp. offers full service mold testing. In order to prevent a conflict of interest Guardian Mold Prevent Corp. uses an independent laboratory for all analysis. Guardian can perform bulk, air sample, and surface lift tests. The turn around time for the lab results with their comprehensive reports can range from 3 to 7 days ...

    By Guardian Mold Prevent Corp. based in Manhattan, ILLINOIS (USA).

  • Toxic Mold Remediation Services

    Molds produce tiny spores to reproduce. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet, and foods. When excessive moisture or water accumulates ...

    By Microtech Environmental Services based in West Babylon, NEW YORK (USA).

  • Indoor Air Quality Testing / Mold Services

    Assessment of indoor mold can only be quantified through the use of biological sampling. The goal of biological sampling is to help determine whether the biological particles present in a particular environmental are affecting or causing irritation in certain individuals. Sampling is also used to locate the sources of indoor microorganisms and ...

    By Auburn Environmental Services (AES) based in Hudson, OHIO (USA). from Health & Safety Services Service line

  • Mold Testing

    Mold can be found almost anywhere; it can grow on virtually any organic substance, as long as moisture and oxygen are present. There are molds that can grow on wood, paper, carpet, foods, and insulation. When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem ...

    By Willow Environmental, LLC. based in Sandy Hook, CONNECTICUT (USA).

  • Mould / Fungi service

    Buildings contaminated with mould and fungus have become a growing problem in recent years. Mould thrives in moist, humid environments and is generally found in buildings with water damage or ongoing moisture problems such as condensation and damp conditions. Air movement and handling of contaminated material can release toxic spores into the air, ...

    By Quantum Murray LP (QMLP) based in Kamloops, BRITISH COLUMBIA (CANADA). from Hazardous Materials Service line

  • Environmental Inspections Services

    Lead Testing. Lead Risk Assessment. Lead/Asbestos/Mold Inspections. Monitoring. Air Sampling. Design and Consulting. Radon Testing. Indoor Air Quality Testing. Phase I Environmental Audits. Phase II Environmental . Investigations. Environmental Remediation. Groundwater Monitoring. Wetland Delineation.

    By AFI Environmental based in Niagara Falls, NEW YORK (USA).

  • Mold Testing & Remediation Services

    Mold is a type of fungus that can grow on the walls, floors and ceilings of a structure, as well as on its contents. There is much more to mold removal than meets the eye. IAP has provided expert mold evaluation and remediation services for hundreds of homeowners and commercial buildings. Mold can make you sick, so proper removal is not something ...

    By Indoor Air Professionals, Inc (IAP) based in Lancaster, NEW YORK (USA).

  • Mold Inspections & Mold Testing

    Mold inspections and mold testing may be completed for many reasons. Piece of mind, visible mold identification, real estate sales, unexplained health conditions, and the list goes on. Typically most people only think about having a mold inspection or mold testing completed when they discover mold already growing. Visible mold can indicate a ...

    By Grangeville Environmental Services (GES) based in Hanover, PENNSYLVANIA (USA).

  • Total Combined Yeast And Mold Count (TYMC)

    Is an estimate of the total viable yeast and mold present in a sample of raw material, in-process material, or finished product. Samples are analyzed in accordance with the most current USP Guidelines Chapter <61>, Microbial Limits Test.

    By Pure Earth Environmental Laboratory, Inc. based in Pennsauken, NEW JERSEY (USA). from Pharmaceutical Division Service line

  • Mold Consultants

    It has been estimated that over 300,000 lawsuits related to toxic mold have been filed in the United States. Construction contractors have been brought into these cases on the theory that their defective methods or procedures caused water leakage, condensation accumulation or other conditions that contributed to the growth of mold or microbial ...

    By Legends Environmental Insurance Services, LLC based in Aliso Viejo, CALIFORNIA (USA). from Consultants Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you