Only show results in Texas? Ok

Particle Size Monitoring services for Monitoring and Testing

  • Premium

    Emission Conditioning Solutions

    Complete setups for emission measurements; Aerosol dilution and sample conditioning is an essential part of any particle measurement system. Most aerosol particle measurement instruments cannot measure reliably when sample conditions differ from ambient nor when particle concentration is high. A well-designed dilution system not only to reduces ...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Cross-Flow Microfiltration Services

    atech innovations is specialized in the production of ceramic membranes for crossflow microfiltration. We offer membranes suitable for microfiltration up to 1.2 µm in multiple channel variations with a wide variety of diameters. We also supply the corresponding pressure vessels and filtering tests if so desired.

    By atech innovations gmbh based in Gladbeck, GERMANY. from Others Services Service line

  • Premium

    Exhaust Conditioning Solutions

    Complete setups for engine emission measurements; Aerosol dilution and sample conditioning is an essential part of any particle measurement system. Most aerosol particle measurement instruments cannot measure reliably when sample conditions differ from ambient nor when particle concentration is high. A well-designed dilution system not only to ...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Particle Analysis Services

    Comprehensive range of cleaning systems and cleanliness analysis techniques for bare and tanked heat exchanger cores, fuel pumps, turbochargers, bearing housings and associated closed circuit engine components to ISO 16232:2007. Flushing and sampling facility with online optical and post microscopic particle analysis is available for sizing and ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Cleaning Services Service line

  • Premium

    Service Repair and Calibration

    Our service technicians are well trained to calibrate your instruments to the highest standards and our software-controlled approach automates critical steps that drive consistency in each calibration. This ensures the same calibration result and performance, consistent with the factory calibration, regardless of where the calibration is ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • Premium

    ICT-S Sampling Services

    Sampling of bulk goods - even if done professional in accordance to the appropriate regulations –  is a challenging task. Though practice and experience often don’t ensure representativeness of the taken samples. Within this proficiency test “sampling of wood pellets according EN 14778” each participant is able to ...

    By BEA Institut für Bioenergie GmbH based in Vienna, AUSTRIA. from Round Robins Service line

  • Premium

    AdEdge AdVantEdge - Uranium Reduction

    A AdEdge provides treatment systems for for uranium removal using AD92 an ion exchange media that is ideal for use in potable water as well as non-potable and environmental remediation applications for removal of naturally occurring uranium. The high efficiency AD92 can selectively remove the negatively charged uranium anion (most often in the ...

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Analysis and Measurement Services

    We are able to arrange a complex material analysis due to our long-term cooperation with various universities and research institutions. Our products are analyzed mainly by methods mentioned bellow, that are provided by RCPTM (Regional Centre of Advanced Technologies and Materials). There are of course many other methods available.

    By NANO IRON s.r.o. based in Židlochovice, CZECH REPUBLIC.

  • Premium

    ISO-16232 Services

    A comprehensive range of sampling techniques are available within the facility to ensure a deep and thorough representative sample is taken. We have at our disposal a full sweep of processes for flushing, pressure spray, agitation, flow benches, shaker tables, pulsation and aeration processes to provide the optimum solution for each ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Cleaning Services Service line

  • Premium

    Oil Cooler Testing Services

    Calorimetric testing for engine oil, transmission, hydraulic and squirt jet coolers, either water cooled or air blast models can be accommodated on all of the calorimetric wind tunnels, covering flow rates up to 100 litres per minute. Coolers can be tested on a controlled specification transmission fluid or a high performance engine motor oil or ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Testing Services Service line

  • Full Service

    DB Sediments offers real full service in your desired scope:

    By DB Sediments GmbH based in Duisburg, GERMANY.

  • Materials & Forensics Testing

    SanAir provides a full range of Transmission and Scanning Electron Microscopy services with fast response time for your required needs. SanAir's facility includes the finest electron optics and preparation equipment providing you with the highest quality. Only the most recent and accepted protocols are followed, insuring you of up-to-date results. ...

    By SanAir Technologies Laboratory, Inc. based in Powhatan, VIRGINIA (USA).

  • Building and Filling Materials And Binder

    QUANTACHROME provides the following test methods for the characterization of building and filling materials and binder:

    By Quantachrome GmbH & Co. KG based in Munich, GERMANY.

  • Emulsions

    QUANTACHROME provides the following test methods for the characterization of emulsions from different fields like cosmetics or food:

    By Quantachrome GmbH & Co. KG based in Munich, GERMANY.

  • Contract Manufacturing

    Hosokawa offers a wide range of contract manufacturing services for chemical & mineral applications including Coarse to Fine Size Reduction, Classification, Mixing and Blending and particle analysis. As an established leader in designing and engineering process equipment and systems, we offer the advantage of process expertise, and bring our ...

    By Hosokawa Micron Powder Systems based in Summit, NEW JERSEY (USA).

  • Research Services

    Material Characterization Studies. Headwaters Resources offers material characterization services to evaluate a byproduct’s potential for beneficial use. Characterization involves developing a material sampling plan, sample collection, physical testing, chemical analysis, and interpretation of results. Some of Headwaters Resources’ ...

    By Headwaters Resources, Inc. based in South Jordan, UTAH (USA).

  • Sediment Washing

    The BioGenesis Sediment Washing Technology is a low temperature decontamination process. Through impact forces and a proprietary blend of chemicals, the technology removes organic and inorganic contamination from soil and sediment particles. Patented by BioGenesis in December 2001, the process is designed to decontaminate both coarse-grained ...

    By BioGenesis Enterprises, Inc. based in Oak Creek, WISCONSIN (USA).

  • Ambient Monitoring Services

    In urban environment the number of aerosol particles changes fast. The mass based measurements do not provide information about these fast temporal variations. Especially since most of the particles are ultrafine ones. Ultrafine particles might not contribute remarkably to the mass, but are important with respect to health effects.

    By Airmodus Oy based in Helsinki, FINLAND.

  • Soil Washing

    Soil washing uses separation technologies form the mining industry, whereby the contaminated soil is separated into its different fractions. The pollution is diverted to the process water or to the elutriable fine fraction that is then processed after drainage on a waste dump site. The large fraction, namely washed sand and debris, can be reused ...

  • Industrial Hygiene

    Industrial Hygiene (IH) is primarily concerned with the control of occupational health hazards.

    By International Asbestos Testing Laboratories (iATL) based in Mt. Laurel, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you