Only show results in Connecticut? Ok

Pressure Testing services for Monitoring and Testing

  • Premium

    Small Pipeline Leak Detection Method

    The smallest leaks include damage to pipes in which the noise of the medium flowing out cannot be measured with acoustic location methods. This may be the case if there are hairline cracks where the amount of medium flowing out is too low to be measured or if there aren't any measuring points for noise sensors or if the points are too far away. To ...

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY. from Network Survey Service line

  • Chemical Cleaning And Chlorination Services

    Leaders in our field, Cleartech provide a high level of expertise and water solutions within the mechanical and electrical services sector of the market place. Our twin package of individually tailored water treatment solutions and commissioning services is second to none.

    By Cleartech Water Solutions Ltd based in East Kilbride, UNITED KINGDOM.

  • Materials Explosion Hazard Analysis & Testing

    We offer dust explosion testing, gas & vapor flammability testing, materials characterization testing, electrostatics testing and flammability. SCE conducts an extensive range of standard hazards tests to support safety hazard analysis. We can test any solid, liquid or gas for initiation sensitivity, speed of propagation and explosiveness. We ...

    By Safety Consulting Engineers, Inc. based in Schaumburg, ILLINOIS (USA). from Explosives Testing Service line

  • Incident Investigation Services

    Gexcon has extensive experience through our ongoing research into the phenomena of explosions, fire and toxic releases. Our specialist expert consultants have investigated numerous incidents ranging from small vessel explosions and toxic releases to large explosions and fires at chemical processing and petrochemical facilities. Many of these ...

    By GexCon AS based in Bergen, NORWAY.

  • Pore Pressure Prediction Service

    Understanding pore pressure and wellbore stability across a project, field or basin can bring significant advantages to exploration and well planning. From prospect evalutation to pre-drill to realtime drilling analysis, DHI uses Drillworks software to provide an integrated pore pressure solution that helps exploration and production companies ...

    By DHI Services Inc. (DHI) based in Puchong, MALAYSIA.

  • Pressure & Burst Pressure Test Service

    Tightness tests of components using the pressure drop method and the performance of pressure or burst pressure tests are cost-effective methods to determine characteristic component values. MAXIMATOR is capable of carrying out these test methods with or without temperature impacts, hence, certain mechanical strength properties can be ...

    By Maximator GmbH based in Mumbai, INDIA.

  • Machine Repairs

    As a leading manufacturer of Under Pressure drilling and Pipe Cutting Equipment Pipetech offer a full machine repair service. All work is carried out by skilled and fully trained technicians who are conversant will all aspects of machine repairs used within the Gas & Water Industry. Pipetech offer a full free of charge quotation service prior ...

    By Pipeline Technology Limited based in Fareham, UNITED KINGDOM.

  • In Situ Testing Service

    ESG provides a full suite of in situ testing as a stand alone service or part of a wider site investigation all backed by superb technical and analytical support.

    By Environmental Scientifics Group based in Staffordshire, UNITED KINGDOM. from Geotechnical Services Service line

  • Pressure Testing Services

    Western Drilling Tools manufactures our own line of Kelly cock valves. These valves all need to be pressure rated. It was because of this product line that we geared our machine shop up in order to provide our own internal pressure testing. Pressure testing is now a service we offer to all our customers for any product they require to be rated to ...

    By Western Drilling Tools Inc. based in Calgary, ALBERTA (CANADA).

  • Hose Pressure Testing Services

    Smithers Rapra performs a variety of hose pressure testing from a number of specifications including automotive, marine, and industrial. Pressure tests include impulse, static, burst, etc. High and low pressure impulse: Smithers can impulse hoses using air (low pressure), water, radiator coolant, oil, brake fluid, and transmission fluid. Burst: ...

    By Smithers Rapra based in Akron, OHIO (USA). from Hose Cycle Testing Service line

  • On-Site Calibration Services

    UKAS Accredited On Site Calibration Services Young Calibration extends its' calibration capabilities by providing a range of traceable and UKAS on-site calibration services throughout the UK, Europe and USA. Realising the commercial and cost benefits to our customers, the on-site calibration sevices cover the major site requirements for ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Testing Services

    Viking Pump will assist in combining our application expertise with your pump needs to make sure the best pump has been selected for the application.

    By Viking Pump, a Unit of IDEX Corporation based in Cedar Falls, IOWA (USA).

  • BlueOcean - Industrial Pump Repair and Servicing

    We service and repair a wide range of industrial pumps with 1 year warranty. All pumps are also performance, pressure and leak tested as appropriate. We also can repair mechanical seals.

    By BlueOcean Memtech Pte Ltd (BOM) based in SINGAPORE.

  • Precision Tank and Line Testing Services

    Developed and patented by Tanknology, the VacuTect precision tank testing system is the world’s leading testing method. It has been used successfully to test more than one million underground and aboveground tanks worldwide. VacuTect determines the integrity of storage tank systems by monitoring for changes in pressure, sound or water level ...

    By Tanknology - EnGlobe Corp. based in Burlington, ONTARIO (CANADA).

  • Tank System Testing, Repair & Lining Service

    Old single skin pipework and tanks especially represent a huge risk to the forecourt operator but full tank replacement can prove incredibly costly due not only to the cost of civil works and the tanks themselves, but also potential contaminated ground remediation and the impact on trading. Our in-house technicians can carry out all elements of ...

    By Vianet Fuel Solutions based in Leicestershire, UNITED KINGDOM.

  • Testing & Certifying Services

    Jetting Systems Europe has a complete workshop with all the necessary equipment to serve the high pressure water jetting industry.

    By DERC Jetting Systems based in Oud-Beijerland, NETHERLANDS.

  • Hot Water Systems

    Unvented Heating Systems sold in the UK are required to comply with the performance requirements set out in of Part G of the Building Regulations and to comply with the UK’s Water (Fittings) Regulations. NSF-WRc is the only UKAS accredited laboratory in the United Kingdom able to carry out the tests to establish that units comply with Part G ...

    By WRc-NSF Ltd based in Oakdale, UNITED KINGDOM. from Laboratory Testing Service line

  • Hy-Lok Quality Control Services

    All Hy-Lok valves, Hy-Lok tube fittings, Hy-Lok threaded and clean fittings and Bite type fittings are manufactured under our strict Quality Control Program. We have obtained ISO 9001 Certificate and Quality System Certificate from ASME. We also have certificates from Det Norske Veritas (DNV) and Germanischer Lloyd (GL). Furthermore, we are one of ...

    By Hy-Lok USA based in Houston, TEXAS (USA).

  • Pipeline Leak Location Services

    Damaged pipes not only leak product but profits and productivity. That’s why we provide a comprehensive suite of accurate and reliable technologies and services that are designed to fit the needs and budget of your business, and are backed by the best experience and reputation in the industry.

    By Praxair Technology, Inc based in Danbury, CONNECTICUT (USA). from Industrial Services Service line

  • Quality / Inspection / Standards Services

    Marks Brothers, Inc. has built an unparalleled reputation supplying high quality products that meet the most stringent standards. “Do it better” is not only Marks Brothers’ mission, it is its goal for every project. The diverse industries and clients Marks Brothers works with have vastly different needs, from simple components to ...

    By Marks Brothers Inc based in Boring, OREGON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you