Monitoring and Testing Equipment

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Mercury Continuous Emission Monitor - Mercury CEM - Flue Gas Analysis - Emission Analyzer Product line

The InnovaSwitch insertion-type flow switch is a high-performance, industrial-grade mass flow switch for liquids and gases. This product was designed for heavy industrial environments, including high temperature and high pressure. Each InnovaSwitch includes temperature compensation over its entire measurement range to ensure set point stability ...

By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA). from Flow Switch for Precision Detection of Liquid / Gas Flows Product line

The zero and span gas and sometimes the carrier gas as well might have to be set to a defined moisture level in order to obtain reproducible analysis values. To set a defined level of moisture for zero and span gases.

By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Span Gas, Zero Gas Dampening Product line

The sonic sensor is for snow and water level monitoring. Custom mounting paired with it’s narrow detection range gives accurate readings out to 5 meters. Check the D405 product page for order options.

By BeadedStream based in Anchorage, ALASKA (USA). from Ultrasonic Distance Sensor Product line

PyxisGC BTEX is a compact analyser for the real time monitoring of Benzene, Toluene, Ethylbenzene and Xylene in ambient air. It is perfect for indoor and outdoor application both. PyxisGC BTEX is manufactured by Pollution Analytical Equipment and it is compliant with EN14662-3:2015.

By Pollution Analytical Equipment based in Budrio (Bologna), ITALY.

Portable TOC Analyser for Stack Emissions – Polaris FID SE (Smart Edition). Lightweight, Compact, Ergonomic, Safe. POLARIS FID SE (PF-300SE) is the evolution of our bestseller Polaris FID, the on-site portable TOC Analyser for Stack Emissions in compliance with EN12619, EN13526 and EPA METHOD 25A. It is a fully portable instrument because it ...

By Pollution Analytical Equipment based in Budrio (Bologna), ITALY.

Pressure measuring range: 1 … 250 mH2O. Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS. Temperature measuring range: -5 … 80°C. Operating temperature: -5 … 80°C. Process temperature: -5 … 80°C. 2 Output signals (p & T): 0 … 10 VDC, 0 … 20 / 4 … 20 mA. Materials: Stainless steel, ...

By STS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND. from Analog Transmitter Product line

A Sharp Weapon of Environmental Supervision, A Guardian of Human Lives. Autonomous Hidden Sewer Pipe Detecting Vessel.

By Oceanalpha Co., Ltd. based in Zhuhai, CHINA. from Autonomous Hidden Sewer Pipe Detecting Vessel Boat Product line

Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to ...

By Axetris AG based in Kaegiswil, SWITZERLAND. from Laser Gas Detection OEM Module Product line

State-of-the-art infrared measuring technology for gas pipeline testing applications. The DP-IR (Detector Pac-Infrared) uses advanced optical technology to achieve a detection sensitivity of 1 ppm by means of IR-CIPS (Infrared Controlled Interference Polarization Spectrometry). This innovative device combines the excellent measuring properties of ...

By Hermann Sewerin GmbH based in Gütersloh, GERMANY. from Detector Pac-Infrared Uses Advanced Optical Technology Product line

This is the most suitable for air storage facility forms. That usually is due to their low cost and ease of installation directly on a concrete slab without any additional operation.

By GCER based in Ksibet, TUNISIA. from Vertical Air Tanks with Flat Bottom Product line

The Model 201C is a continuous VOC Analyzer designed for continuous or process control. It has optional 4-20 mA output, RS485, MODBUS, 2-4 programmable setpoints, larger pump, bypass flow & and a 19” rack or industrial wall mount NEMA 4 enclosure. This 201C has the choice of one 9.5 or 10.6 eV lamp in a PID or an FID, Operator's Manual, ...

By PID Analyzers, LLC. based in Sandwich, MASSACHUSETTS (USA). from Continuous Monitor for VOC`s, Inorganic & Fixed Gases Product line

The TD-4100 XD is a ruggedized version of the TD-4100 continuous on-line oil in water monitor. The XD is designed specifically for offshore oil production, refining, petro-chemical, mining, and other industries that require robust on-line hardware for severe duty and hazardous area locations. The monitor is skid or wall mounted and constructed of ...

By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the ...

By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Delft Bottle Suspended Load Sediment Sampler Product line

The MGA-1000 series of graphite furnace atomic absorption spectrometers crystallizes intuitive technology and exceptional handling. The unique High Frequency Zeeman background correction system ensures effective compensation of intense and rapidly changing spectral interferences and brings routine analysis of complex samples to new heights.

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

The T500U CAPS NO2 Analyzer represents the next generation of criteria pollutant monitoring technology for the direct measurement of Nitrogen Dioxide (NO2) in air. The instrument utilizes a patented Cavity Attenuated Phase Shift (CAPS) technique to provide an extremely sensitive, fast and accurate NO2 measurement in a cost effective and low ...

By Teledyne API based in San Diego, CALIFORNIA (USA). from CAPS Trace-level NO2 Analyzer with NumaView™ Software Product line

OSi’s AWS-432 MAWOS is an advanced / bestvalue Modular Automated Weather Observing System built around the OWI-432 present weather / visibility sensor. The AWS-432 MAWOS is designed for aviation applications and continuous weather reporting. The system is flexible, robust, easily installed, and extremely reliable. OSI has fielded weather ...

By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA). from Modular Automated Weather Observing System (MAWOS) Product line

Gasmet CEMS is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19' rack mounted in pull-out shelves for easy accessibility & service. Gasmet CX4000 FTIR gas analyzer allows the ...

By Gasmet Technologies Oy based in Helsinki, FINLAND. from Continuous Emissions Monitoring System Product line

Pressure measuring range: 1 … 250 mH2O. Accuracy: ≤ ± 0.15 / 0.05 / 0.03 % FS. Operating temperature: -5 … 80 °C. Process temperature: -5 … 80 °C. Interface: RS485. Materials: Stainless steel, Titanium.

By STS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND. from Modbus Level Transmitter Product line

With its unique design and simple operation, the Glass Oven B-585 Drying is a cost efficient way to dry small and medium sized samples gently under vacuum. Its temperature range up to 300 °C opens multiple possibilities.

By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND. from Drying Glass Laboratory Oven Product line