Sampling Pumps Equipment For Monitoring And Testing
-
ShowcaseManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being officially ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Parallel measuring of up to 4 particle fraction with only one instrument. With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallel with only one ...
-
ShowcaseManufactured by Labconco Corporationbased in USA
FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58° F), suitable for aqueous ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The new XC-53 from Apex Instruments is designed as a cost-effective entry-level metering console for isokinetic sampling. The console features our advanced Peak 32 microcontroller module (MCM) for measuring and displaying stable pressures and temperatures. The transflective LCD screen displays the elapsed time, the pitot velocity pressure (?P), the venturi sample flow pressure (?H) and the ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS offers Hand Vacuum Pumps and Electric Vacuum Pumps to assist in soil gas and groundwater sampling. The Hand Vacuum Pump allow for samples to be taken into suitable test containers at sites where electricity is not accessible. They have a vacuum gauge release valve and fittings. The 12-volt Electric Vacuum Pump includes a 15 foot ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR IX616 portable four gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines. It keeps the workers safe and helps prevent the facilities from being ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The SingleSample High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" ID tubing. An optional stepped barb can be threaded on each end for use of up to 1/2" tubing. 45µm ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The SingleSample High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8' NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8 ID tubing. An optional stepped barb can be threaded on each end for use of up to 1/2' tubing. Type: ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
Flow Directors are designed to transform SenseAir K30 and K33 model sensors from diffusion to sample draw sensors. The tube cap kit attaches directly to the top of the sensor with self-tapping ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas monitor for fast, precise, direct and continuous measurement of NO2 concentrations in the range 0-1000 ppb. Visible (450 nm) absorption measurement using patented Cavity Attenuated Phase Shift (CAPS) technology. QAL1 certified by the TÜV, US-EPA approved. Fast and direct measurement of the sample – no chemical conversion required, no Toxic Gas ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring single toxic hydrocarbons for the industrial applications. Synspec Delta 100 and Delta 300 analysers are gas chromatographs (GCs) built specifically for the industrial applications to ensure worker safety, emissions and process control. Depending on what component and its concentration you need to measure, our team will develop and install an appropriate detector, columns, sample ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 905 is a benchtop, portable oxygen analyzer used primarily for the measurement of residual oxygen in gas-flushed food packages. The Model 905 is used for the measurement of residual oxygen in food packages. With an expected oxygen sensor life of 4-5 years, it vastly outperforms other oxygen analyzers with a cheap sensor that might last 1-2 ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This extremely popular, outdoor rated continuous duty air sampling system is intended for secure outdoor ambient particulate and/or gaseous air sampling. The pump, control valve, and control panel are all hard mounted in a heavy gauge TIG welded aluminum, fully lockable, fan cooled, weather proof enclosure. The control panel houses the power switch, fuse protection, resettable electronic timer ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The K30 10,000ppm Sensor Module (030-8-0006) formerly known as (SE-0018) is intended to be built into different host devices that require CO2 monitoring indoors. It is an accurate, proven, low-cost solution for OEMs who want to integrate CO2 sensing into their products, research, and studies. ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
airmo HCHO is designed for the measurement of formaldehyde in air or pure gases. The airmo HCHO is an autoGC using FID detector dedicated to Formaldehyde monitoring at low concentration. This instrument uses a valve with a single sorbent trap, a metallic column and a ...
-
PremiumManufactured by ENVEAbased in FRANCE
UV Fluorescence gas monitor offering excellent performances for the monitoring of SO2 in the range 0-10 ppm or 0-1 ppm. Eco-designed, reference air quality monitor, QAL1 certified by the TÜV, US-EPA approved. Utilizes the standard method for the measurement of sulfur dioxides(EN 14212). With its ultra low power consumption & 24 V supply (option), the AF22e is the sole SO2 monitor on the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The ECONOAIR Premium L-12PTR is a low-cost high-performance personal air sampling pump. It is a simple model designed for sampling of asbestos, lead and other airborne contaminates. The rugged compact design features a rechargeable NiMH battery with available one-hour recharger. The L-12PTR can be programmed for timing routine activated sampling and allows the operator to select a reference T ...
-
PremiumManufactured by Labconco Corporationbased in USA
FreeZone 2.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84° C (-119° F), suitable for samples with low eutectic points including ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you