Refine by
Itasca Monitoring Testing Services
24 services found
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca has provided analysis of nearly all types of retaining structures, including slurry-supported reinforced concrete diaphragm walls, sheet pile walls, soil-nailed walls, and tieback walls. As with dams, water pressure acting within the soil mass is often a key issue. The ability to predict water pressures is an important element in understanding the behavior of retaining structures. Itasca ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca is experienced in estimating the dewatering needs of a construction site or mine to temporarily lower groundwater levels below the natural groundwater level, in all seasons, to provide for safe excavation construction and working environment during operations. Itasca also predicts dewatering rates, performing numerical modeling to estimate dewatering and to design and optimize the ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca performs analyses for concrete/masonry dams (including arch, gravity, RCR - roller compacted concrete) and embankment dams (earth, rockfill, and mine tailings dams), including: Short- and long-term mechanical behavior analysis of dams on fractured rock. Optimizing dam design based on criteria constraints. Analyzing thermo-hydro-mechanical behavior of a concrete dam subjected to thermal ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Microseismic monitoring allows for the imaging and visualization of active fracture networks within developing and producing EGS. Real-time monitoring of microseismic data can provide instant feedback on injection pathways in a treated field and potential fault rupture and propagation that can affect production efficiency. Post-processing offers a greater understanding of long-term reservoir ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca designs the ground support layout and specification necessary to reinforce, retain, and hold the rock mass around excavations. The required level of ground support can be determined from an understanding of the rock mass strength, the initial (in-situ) stresses, and the stresses (magnitude and orientation) likely to change over time. By considering the evolution in induced stress over ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca's staff is thoroughly versed in the environmental permitting process, having worked closely with different mining companies, with federal, state, and local government agencies, as well as with other consultants and subcontractors. Through these interactions, Itasca has earned a solid reputation for its ability to combine highly-defensible technical work with the appropriate level of ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca has over 20 years of experience in applying seismology to a wide range of engineering applications, allowing engineers to non-destructively monitor structure health and integrity and locate areas of ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Methodologies for the collection of hydrogeologic and geochemical data vary, as do the ways those data are managed and presented. Itasca offers consulting services to customize solutions that meet each client’s needs related to the management and presentation of hydrogeologic and geochemical data. ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Natural barriers, including geological formations — salt, argillite, sedimentary or crystalline settings — constitute the most important component of the complex multilayered system that isolates stored waste from the biosphere. Therefore, the design and performance assessment of waste repositories require a thorough knowledge and understanding of host rock behavior. Itasca has ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca specializes in site assessment, data analysis, the evaluation of impacts to water resources, the selection of remediation systems, the implementation of remedial actions that lead to the closure of sites where contaminated soil and groundwater are encountered, and seismology. Services are provided that range from the sampling of soil, sediment, and water to the construction of detailed ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca has been involved in the real-time monitoring, post-processing, and quality assurance of enhanced oil recovery projects using single- and multi-stage hydraulic fracturing. Company experience covers a wide variety of completions, acquisition geometries, and treatments, employing novel processing techniques where necessary to improve the quality of information feedback to oil and gas ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca’s engineers have wide experience working on earthquake engineering, microseismic measurement and analyses, and explosive and impulsive loading; Itasca’s commercial software is the best available for dynamic modeling for engineering design, factor of safety prediction, research and testing, and back-analysis of failure. The finite volume strength reduction method (FV-SRM) ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Masonry is one of the oldest methods of construction, but has lost nothing of its attractiveness and use in modern times. The behavior of this heterogeneous and anisotropic material is determined by the interaction of stone (brick, quarry stone, natural stone, etc.) and joints (open, mortar, glued, etc.). The behavior and performance of masonry structures under load is characterized by complex ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca provides solutions for storage of natural gas or compressed air in lined and unlined caverns. Our diverse team with expertise in analyzing geo-structural interaction, geomechanical, thermal and creep coupled problems assesses the stability and long term performance of storage caverns due to combinations of critical loading conditions in singular and group cavern settings by means of 2D and ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca offers services in backfill characterization, specification, design of mixing and delivery systems, stability analysis (exposure stability, reinforcement and closure resistance), dynamic modeling to examine stability and liquefaction potential under rockburst and rockfall conditions, and instrumentation and testing of placed backfill. These services cover a wide range of backfill products ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca can estimate the dewatering needs of a construction site or mine to temporarily lower groundwater levels below the natural groundwater level, in all seasons, to provide for safe excavation construction and working environment during operations. Itasca can predict dewatering rates, including numerical modeling to estimate dewatering and design and optimize the dewatering and water-disposal ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Experience in foundations includes application of Itasca’s software to problems where existing techniques are either unavailable or are known to be inaccurate. For example, FLAC3D was used to determine the subgrade reaction modulus for a thick concrete slab placed over fill with varying thickness. In another case, an industrial machine produced a cyclic vibration. The effect of the ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
One of the main advantages of the discrete approach as defined by Itasca (PFC) is that it allows to accurately reproduce the size distribution, the grain shape (rounded, angular, or elongated), the mineralogical composition, as well as the mechanical and thermal properties of each ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca’s hydrogeochemists have broad experience in evaluating the chemical characteristics of soil, tailings, waste rock, groundwater, and surface water at mining and environmental sites. Comprehensive evaluation of hydrogeology and geochemistry provides an integrated approach and can facilitate a more thorough understanding of complex groundwater and surface-water systems. ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca is particularly well-known for examining complex problems involving slope instabilities in soil and rock. One specialty is assessment of slope stability and design on scales ranging from civil engineering slopes in soil and rock, including portals, to mine benches and inter-ramps for many of the world’s largest open-pit mines. Another is analysis of both the static and dynamic ...