Sludge Monitoring Services

36 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Sludge Monitoring ×

Sludge Volume Index Meter

by Bltec Korea Ltd.     based in Seoul, SOUTH KOREA

On-line Sludge Settleability measurement System

Biodegradation Services

by AquaTox Testing & Consulting Inc.     based in Guelph, ONTARIO (CANADA)

Activated Sludge, Respiration Inhibition Test (OECD 209). Ready Biodegradation (e.g., OECD 301A, OECD 301B, OECD 301D, OECD 301E, OECD 301F, OECD 302B). Inherent Biodegradation (e.g., OECD 302B). Anaerobic Biodegradation. Respirometry Tests. Soil Microorganism. pH Screening by Electrometric Measurement.

Soil & Sludge Sampling

by Adirondack Environmental Services Inc.     based in Albany, NEW YORK (USA)

Adirondack is a full-service laboratory with a comprehensive Field Services sampling department. Soil sampling – for investigations, remediation and exposure – is a big part of our business.

Sludge Dewatering (Atox) Services

by Smet Jet NV     based in Oevel, BELGIUM

Atox is a part of Smet Jet and has all the know-how for dewatering liquid sludge flows. The dewatering of sludge is an important step in the process of water purification and reducing waste streams. We have our own laboratory for the analysis of sludge samples to determine the dewatering properties of the sludge. We have the following mobile ...

Water Soil Services

by P&J Milieuservices B.V.     based in Nijkerk, NETHERLANDS

Knowledge of the quality of the water bottom is particularly important when dredging operations are carried out. The quality of the water bottom to be dredged, and the receiving sediment must be known. Even when ownership transfers can understand the sediment quality is necessary. PJ Milieu BV conducts research on the basis of the applicable ...

Sludge Treatment

by ESP (International) Ltd.     based in Miri, MALAYSIA

ESPI has extensive experience in the removal and treatment of hydrocarbon sludge residues found in oil refineries, crude oil terminals and process facilities. We provide both mobile and permanent systems designed by our own engineers based upon a detailed analysis of the material to be treated. Treatment systems may include centrifugal separation, ...

Sludge Pumping And Conveyance

by Griffin Dewatering     based in Houston, TEXAS (USA)

Utilizing our own lines of pumps, or other specialized pumping equipment, Griffin can convey large volumes of contaminated water and high solids content sludge. Our own pump line includes: Trash pumps, Axial – Flow pumps, and Materials Handling pumps. We manufacture, sell, and lease these pumps for application with refinery sludges, ...

Environment Analysis

by Bhagavathi Ana Labs Limited     based in Banjara Hills, Hyderabad, INDIA

Bhagavathi undertakes analysis of - Solid, liquid, Sludge, Sediments Characterizations & analysis. Heavy metals, Phenols & derivatives, Cyanides & Isocyanates, Arsenic and it's compounds, Organic halogenated & non-halogenated compounds, Polychlorinated biphenyls, Carbon monoxide, Hydrogen sulphide, Sulphur dioxide, Total ...

Expanded Granular Sludge Bed (EGSB)

by asiaBIOGAS Co. Ltd. (ABC)     based in Bangkok, THAILAND

expanded granular sludge bed (EGSB) reactor is a variant of the upflow anaerobic sludge blanket digestion (UASB) concept.[1] The distinguishing feature is that a faster rate of upward-flow velocity is designed for the wastewater passing through the sludge bed. The increased flux permits partial expansion (fluidisation) of the granular sludge bed, ...

Laboratory Analysis

by Ake Environmental and Construction Services, INC.     based in Bedford, OHIO (USA)

Our lab is on site, quality conscious and uses Standard Methods. We also: Handle NPDES permit renewals, Monthly EPA required reporting including annual Sludge Reports, Consumer Confidence Reports as well as Contingency Plans, Total Coliform and Total Chlorine as needed.

Sludge Disposal with Thermal Treatment Services

by Lamor Corporation Ab     based in Porvoo, FINLAND

Lamor offers thermal treatment service for oily sludge in cases where the in-flow of material is sufficiently steady and high in volume to support the process. This treatment type is highly recommended when the output can be utilized for industrial or domestic purposes. In addition to incineration, Lamor utilizes thermal desorption.

Hazardous Waste & Soils Analysis

by E.S. Babcock & Sons Laboratories (ESB)     based in Riverside, CALIFORNIA (USA)

ESB laboratory services provide for the analysis of solid waste, oils, sludges and hazardous materials. Tests performed include waste characterizations, such as pH, flash point, cyanide, and sulfide bearing wastes. A wide variety of inorganic and organic determinations are also available following SW-846 methods, in addition to: Toxicity ...

Vacuum Loading and Transportation of Loose Materials, Sludge and Liquids

by CLIMBEX S.A.     based in Brzezie k/Opola, POLAND

The suction and force pumping units, installed on the Mercedes and VOLVO truck chassis, are used for vacuum loading and transportation. The units are equipped with Root-type pumps from 6500 m3/h to 8600 m3/h in flow rate. Their maximum negative pressure is approximately 90 kPa. The pumps are driven by combustion engines of rated power from ...

High Flow Vacuum Transfer Services

by McCutcheon Enterprises, Inc.     based in Apollo, PENNSYLVANIA (USA)

Vacuum transfer is the best way to move materials continuously and expedite the removal of sludge without costly equipment shutdowns.  MEI uses an aggressive fluid vacuum method to transfer materials at a rate up to 1,800 gallons per minute.  High capacity and fast flow eliminate the double handling of waste materials.  Ultrasonic ...

Feedstock Analysis Services

by International Synergies Ltd (ISL)     based in Birmingham, UNITED KINGDOM

International Synergies’ insight into local resource streams and availability played a key factor in the decision for Pointon’s to go ahead with the new Anaerobic Digestion facility. Its work established that we could feed our own materials into the site, and that there was sufficient volumes of ABP, food waste and effluent sludge in ...

Optimized Solutions Relating To Water & Sludge Processes

by Service in Separation BV     based in 8243, NETHERLANDS

Sludge is generally known as the wet waste from waste water treatment. In situations where a water treatment plant or process in not functioning at optimal levels, there is an opportunity to change the overall production in order to reduce the total sludge output. Service in Separation specializes in investigating the water treatment process, and ...

Site Remediation

by 3R of Charleston, Inc.     based in Goose Creek, SOUTH CAROLINA (USA)

Our company can provide technical support from engineers, chemists, and safety professionals to conduct onsite remediation of contaminants.

Lab Testing Service

by Fournier Industries Inc.     based in Thetford Mines, QUEBEC (CANADA)

Fully equipped lab allows rapid sludge sample results. The sludge characteristics and its dewatering potential are evaluated in our laboratory by qualified technicians.

Pilot Testing

by Fagor Edergarden S.L.     based in Mondragón (Guipuzcoa), SPAIN

After the laboratory analysis, the pilot testing is the next critical phase of the process. When we reach this point, the lab analysis has provided satisfactory results and there is an interest in evaluating over a certain period of time how the Rotary Press treats the sludge on-site. This mobile unit is fully equipped and is a perfect real-case ...

UCI - Contaminated Water Diving Services

by Underwater Consultants International, Inc. (UCI)     based in Lockport, NEW YORK (USA)

Our operations frequently take us into areas where hazardous materials exist. Hazardous materials may exist on a project site both knowingly and unknowingly. Sometimes the project is a known hazardous material site, but more often hazardous materials are incidental to the job site. Being able to effectively complete your project while maintaining ...

Need help finding the right suppliers?

Let the XPRTs do the work for you