Only show results available in Connecticut? Ok

Soil Augers services for Monitoring and Testing

  • Direct- Push Services

    Environmental field investigation techniques have advanced greatly in the last few years, and at the forefront of these techniques is the Direct-Push unit. S2C2 only uses genuine Geoprobe® direct-push units and tooling for our investigations. A Direct-Push Unit, with an experienced operator, is capable of significantly reducing sampling time, ...

    By S2C2 Inc. based in Raritan, NEW JERSEY (USA).

  • Environmental Drilling Services

    Exploration Drilling. Monitoring Wells Installation (2', 4', and 6') PVC, Stainless Steel, and Teflon. Angle Hole Drilling. Recovery Wells Installation. Installation of Soil Vapor Extraction Wells. Auger Drilling (6', 8', 10'). Subsurface Contamination Evaluation and Delineation. Water Well Drilling. Direct Push Technology. Diamond Core ...

    By Environmental Resources Technologies - ERTEC PSC based in Rio Piedras, PUERTO RICO.

  • Drilling Services

    Oklahoma Environmental Services (OES) offers our clients direct push rig and well completion services. Our staff of experienced, licensed drillers has completed the installation and monitoring of wells for a wide variety of environmental concerns. We routinely conduct site delineation, site suitability analyses and soils investigations for the ...

    By Oklahoma Environmental Services based in Oklahoma City, OKLAHOMA (USA).

  • Accutest - Field Services

    Accutest’s Field Services Department offers Occupational Safety and Health Administration (OSHA) certified sampling technicians to support environmental projects. Accutest has the capacity to fully equip and mobilize teams utilizing the appropriate level of protection to accommodate project safety requirements.

    By Accutest Laboratories based in Dayton, NEW JERSEY (USA).

  • Soil & Groungwater Invenstigation

    The following are methods employed by PHASE ONE INC. to acquire information relating to the possible contamination of surface soils, subsurface soils, and groundwater: Hand Auger Borings and Sampling (for shallow depth sampling), Direct Push Borings and Sampling (for medium depth sampling), Drill Rig Borings and Sampling (for deeper ...

    By Phase One Inc. based in Laguna Hills, CALIFORNIA (USA).

  • Geotechnical Engineering Services

    The science of geotechnical engineering is based on understanding the properties and behavior of water, soil, and rock when outside factors are introduced through development or changed conditions. We specialize in using these properties under various conditions including foundation support, stability, subsidence, and other factors that affect ...

    By KU Resources, Inc. based in Duquesne, PENNSYLVANIA (USA).

  • Structural Support Services

    Auger Cast Piling. Wet Soil Mixing. Steel Sheet Piles & Soldier Piles. Cement/Slurry Grouting.

    By ENTACT, LLC based in Grapevine, TEXAS (USA). from Geotechnical Services Service line

  • Soil Polluted Diagnosis Services

    RVX carries out environmental diagnosis of industrial plants and also studies concerning the interpretation of natural state. These studies generally take part of an administrative procedure as well as carrying out of an Impact Study on Environment EIE or during conformation to file ISO 14 000 standards.

    By RVX based in Bonneville, FRANCE.

  • Field Geotechnical Testing And Monitoring Services

    Deep Auger Borings with soil sampling and testing by Standard Penetration Test (SPT) Earthwork monitoring and fill density testing with nuclear gauges Plate Bearing Tests and CBR Ground Penetrating Radar (GPR) Downhole Seismic Tests Crosshole Seismic Tests Seismic Refraction Resistivity Ground Water Pumping Tests Piezometer installation and ...

    By Jaca & Sierra Testing Laboratories Psc. based in San Juan, PUERTO RICO.

  • Deep Pollution Source Excavation Services

    National guidelines for polluted sites and soils management insists on removal of pollution sources as a priority of management plans. But these hotspots are sometimes found directly underneath existing infrastructures. Sol environment implements retaining solutions to ensure stability of nearby structures during complex excavations.

    By Sol Environment - Sol├ętanche Bachy Group based in Nanterre, FRANCE.

  • Phase II Environmental Investigations Services

    ASE has conducted over 1,000 Phase II environmental investigations of soil, groundwater and building structures since 1982. These investigations have ranged from single-sample projects to assessments requiring hundreds of sample points. With the experience gained through the years, you can count on ASE to develop a cost-effective scope for the ...

    By Aqua Science Engineers, Inc. based in Irvine, CALIFORNIA (USA).

  • Environmental Drilling Services - Licensed Environmental Drilling services in 14 states

    Direct-Push, auger, drop hammer, air hammer technologies, allowing for:Soil Sampling, monitoring well installation, well abandonment, temp well installation, geotechnical sampling

    By Innovative Environmental Technologies, Inc. (IET) based in Pipersville, PENNSYLVANIA (USA).

  • Soil and Groundwater Services

    Industrial and commercial facilities (gas stations, for example) can release contaminants into the environment. These contaminants can seep into the ground, or be carried by rainwater to the groundwater. Other contaminants can be trapped in the soil, becoming sources of even more groundwater contamination. When you need detailed information about ...

    By Tioga Environmental Consultants based in Memphis, TENNESSEE (USA).

  • BAUER - In-Situ Remediation Technologies

    In-situ techniques are used alone or in addition to pump-and-treat and soil-vapour methods in order to sustainably reduce the remediation time. With thermal techniques, such as thermo-stripping, steam injection and hot-water-flushing long lasting remediation success was achieved in several projects within a few weeks and months.

    By BAUER Resources GmbH based in Schrobenhausen, GERMANY. from Remediation Technology Service line

  • Soil and Sludge Treatment Capabilities Services

    The industry utilizes a number of different acronyms to describe vertical auger mixing including: DSM (Deep Soil Mixing), SAM (Single Axis Mixing), or ISS (In-Situ Solidification/Stabilization). ENTACT performs soil mixing with large diameter augers (typically 3 to 12 ft in Diameter) equipped with mixing paddles and grout ports. As the auger is ...

    By ENTACT, LLC based in Grapevine, TEXAS (USA). from Geotechnical Services Service line

  • Sonic Drilling

    Sonic drilling is a unique innovative technique for environmental, geotechnical, construction, seismic and mineral applications.

    By Ecologia based in Sittingbourne, UNITED KINGDOM. from Drilling Services Service line

  • BEnvironmental Investigations Well Drilling - Environmental Drilling

    BEnvironmental Investigations Inc. a subsidiary of GWS Environmental Contractors Inc. provides environmental drilling and soil borings. BEnvironmental Investigations specializes in borings and drillings in tight spaces and in basements providing monitoring wells, temporary sampling wells using hollow stem augers, as well as well abandonments, ...

    By GWS Environmental Contractors Inc. based in South Brunswick, NEW JERSEY (USA). from Environmental Services Service line

  • Stabilisation / Solidification (S/S)

    This process can be carried out insitu using either modified continuous flight auger soil mixing equipment or power mixers, which are attached to the arm of a long reach excavator, or exsitu using traditional excavators, batching plants and ancillary equipment. HBR has leading experts within the S/S field, who have wealth of experience in numerous ...

    By Heijmans Blackwell Remediation Ltd based in Essex, UNITED KINGDOM.

  • In-Situ Soil Mixing with Thermal Treatment Services

    In-situ soil mixing with thermal treatment & iron injection using lda (large diameter auger). In-situ chemical oxidation. In-situ & ex-situ stabilization & bioremediation.

    By FECC, Inc. based in Orlando, FLORIDA (USA).

  • Pilot Tube Method of Installation

    Over 400,000 linear feet of NO-DIG pipe has been installed on more than two hundred projects in the U.S. since 1992.

    By The Logan Clay Products Company based in Logan, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you